CJM (Justin's) drag build

Rusty · 06-29-2019, 09:27 PM

Quote:

Originally Posted by phunk

The car runs but currently cannot drive due to a clutch problem. The components are too warped to allow disengagement. The car sits awaiting clutch rebuild components from OSG.

Your ears must be burning. ZS and me was just talking about this car last night.

phunk · 06-29-2019, 09:38 PM

Ya a lot of effort was wasted looking at the hydraulics since that is usually the culprit when there are clutch problems on this platform. But Justin replaced the whole system and there was zero improvement. So attention has shifted to the clutch. Since the clutch seemed fine between the last abuse it saw at the track up until he pulled the engine, nobody really even looked at it. Perhaps it was damaged during transmission removal or installation. Or maybe the warpage became more of a problem if the clocking of the disks during reassembly didn’t match their original clocking when they warped? Who knows.

phunk · 06-29-2019, 09:47 PM

There seems to be no photos really of the build here. This is a semi-recent photo. The hood does shut, and has no holes in the hood skin. The underside has a bunch of stuff cut out though to clear the throttles and tubes. Strut bar does fit fine, just have to space it up a little bit with some washers.

Rusty · 06-29-2019, 10:12 PM

Quote:

Originally Posted by phunk

There seems to be no photos really of the build here. This is a semi-recent photo. The hood does shut, and has no holes in the hood skin. The underside has a bunch of stuff cut out though to clear the throttles and tubes. Strut bar does fit fine, just have to space it up a little bit with some washers.

On the top piece that you cut out for tube clearance, where the hood latch is. You going to make a new piece to tie everything back in?

Spooler · 06-30-2019, 01:33 AM

Quote:

Originally Posted by Rusty

Your ears must be burning. ZS and me was just talking about this car last night.

That's because I posted on Phunks Instagram account yesterday. LOL At least I was not the only one with Clutch issues.

phunk · 07-01-2019, 12:51 PM

Quote:

Originally Posted by Rusty

On the top piece that you cut out for tube clearance, where the hood latch is. You going to make a new piece to tie everything back in?

I havent seen the car in a couple weeks, I am not sure where he is at with the front end. I know when this pic was taken there was still more pieces to go back in, but I dont recall anything that wasnt stock going in there.

Spooler · 08-19-2019, 04:23 PM

Waiting for the updates. LOL

06-29-2019, 09:38 PM	#47 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Ya a lot of effort was wasted looking at the hydraulics since that is usually the culprit when there are clutch problems on this platform. But Justin replaced the whole system and there was zero improvement. So attention has shifted to the clutch. Since the clutch seemed fine between the last abuse it saw at the track up until he pulled the engine, nobody really even looked at it. Perhaps it was damaged during transmission removal or installation. Or maybe the warpage became more of a problem if the clocking of the disks during reassembly didn’t match their original clocking when they warped? Who knows. Rusty, Spooler, redondoaveb and 1 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

08-19-2019, 04:23 PM	#52 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Waiting for the updates. LOL JARblue and Rusty like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drag race burn out with drag radials.	YzGyz	Track / Autocross / Drifting / Dragstrip	5	03-10-2016 03:49 PM
Drag Racing	StrokeThis347	Track / Autocross / Drifting / Dragstrip	4	04-11-2013 09:15 AM
Ontario Z drag day	Z eliminator	Canada	10	06-26-2010 11:34 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM
My drag truck	Goolsbymd	Other Vehicles	4	10-19-2009 09:06 PM