CJM (Justin's) drag build

Streetz · 03-10-2018, 10:05 AM

Quote:

Originally Posted by Quicksilvers

What tires are you using to planet all that power to the ground?

I use MT Bias ply 28x10.5w

Spooler · 03-10-2018, 01:19 PM

Quote:

Originally Posted by Streetz

Turbo spool is instant, you wont notice much if any difference from 28's to 30's. I ramp my boost in slow on purpose to keep the torque down, so the graph is miss leading.

I would change to a 30 frame but it is too late. Oh well. It should be plenty to meet my HP goal.

Quicksilvers · 03-11-2018, 09:13 PM

Quote:

Originally Posted by Streetz

I use MT Bias ply 28x10.5w

That should be plenty enough to plant your power to the ground. Your suspension set up would be a concern though.

cupcakez · 03-11-2018, 11:37 PM

just slap on a set of kw v3 and u good haha

Streetz · 03-15-2018, 01:35 PM

The stock springs and ride height worked really well for us. We do have a drag shock that really helps the cars squat and stay low after launch. We will be offering this product one of these days (cough couch phunk) I would highly recommend leaving the car at stock ride height. The Z has a really aggressive compression camber issue when lowered.

URBiN~HURMiT · 11-24-2018, 06:48 PM

Quote:

Originally Posted by Streetz

The stock springs and ride height worked really well for us. We do have a drag shock that really helps the cars squat and stay low after launch. We will be offering this product one of these days (cough couch phunk) I would highly recommend leaving the car at stock ride height. The Z has a really aggressive compression camber issue when lowered.

I had the Vance Drag Racing Coilovers installed at MA-Motorsports (Daelen Snow's) recommendation.
Have yet to take possession of my car but did get a chance to test drive it before final tweaks.
With a little adjusting here and there you can get a good plant and dial out the wheel hop
The car does ride nice as it is ...
Will let you know how that all works out in the Spring Season at Island Dragway here in NJ.

URBiN~HURMiT · 11-24-2018, 06:55 PM

MA-Motorsports politely informed me that the drag racing coilovers I had inquired about weren't the answer I was looking for.

They did educate me and pointed me towards a custom designed and manufactured coilover specifically for my drag racing requirements.
The coilovers are made by Vance - are special ordered and tailored to the specifications of my car.

They come in 2 levels of design and price.
The single tube version is only a few $ more than the other generic ones I had asked about.
The double tube version is fully adjustable for track conditions and you can actually dial out wheel hop.
It's also double the price.

MMA will install camber arms and set up the suspension and 4 wheel alignment with corner balance
MMA also offers a service where they will go to the track with you and dial in the car for you if you'd like.
This is the level of service and proficiency I'm looking for.

Spooler · 01-31-2019, 08:01 PM

How much longer do we have to wait before your car is up and running?

sc10692 · 01-31-2019, 09:27 PM

What's the benefit of using VR heads instead of VQ35HR?

Elmo370z · 01-31-2019, 09:48 PM

Quote:

Originally Posted by sc10692

What's the benefit of using VR heads instead of VQ35HR?

Who is using VR heads?

sc10692 · 01-31-2019, 10:08 PM

Read OP quick and it looks like he's just using the VR head bolts nvm

Spooler · 01-31-2019, 10:27 PM

Quote:

Originally Posted by sc10692

What's the benefit of using VR heads instead of VQ35HR?

Because if you use the VQ35HR heads you will need to run a standalone ECU and it is a challenge to get everything working in the car like it is suppose to.

Spooler · 01-31-2019, 10:28 PM

Quote:

Originally Posted by sc10692

Read OP quick and it looks like he's just using the VR head bolts nvm

He was on a completely stock engine.

phunk · 02-06-2019, 11:49 PM

Justin's car isn't expected to run well into spring 2019. There is a lot of fabricating that needs to be done to build the custom intercooler and piping system, along with a custom coolant expansion tank setup. This thread was created about a year prematurely.

He just put the completed built engine back in the car maybe 2 months ago. Its got a ways to go.

His engine is using typical VQ37VHR cylinder heads, but yes we did fasten them to the engine with factory Nissan VR38DETT head bolts. This required a whole lot of custom machining.

jmroy6 · 02-07-2019, 12:58 PM

How much more torque can you get out of the VR38DETT head bolts compared to a vq37 L19 head studs? Does anyone know what size the VR head bolts are.. 3/8" or 1/2" dia.?

03-15-2018, 01:35 PM	#20 (permalink)
Streetz Base Member Join Date: Aug 2015 Location: Chicago Posts: 59 Drives: 2011 370zTT 818whp Rep Power: 10	The stock springs and ride height worked really well for us. We do have a drag shock that really helps the cars squat and stay low after launch. We will be offering this product one of these days (cough couch phunk) I would highly recommend leaving the car at stock ride height. The Z has a really aggressive compression camber issue when lowered. URBiN~HURMiT likes this.

11-24-2018, 06:55 PM	#22 (permalink)
URBiN~HURMiT Base Member Join Date: Jul 2017 Location: Northern New Jersey Posts: 156 Drives: 2009 370z 6MT Rep Power: 4621	Vance Coilovers MA-Motorsports politely informed me that the drag racing coilovers I had inquired about weren't the answer I was looking for. They did educate me and pointed me towards a custom designed and manufactured coilover specifically for my drag racing requirements. The coilovers are made by Vance - are special ordered and tailored to the specifications of my car. They come in 2 levels of design and price. The single tube version is only a few $ more than the other generic ones I had asked about. The double tube version is fully adjustable for track conditions and you can actually dial out wheel hop. It's also double the price. MMA will install camber arms and set up the suspension and 4 wheel alignment with corner balance MMA also offers a service where they will go to the track with you and dial in the car for you if you'd like. This is the level of service and proficiency I'm looking for. Rusty, Hotrodz, Spooler and 2 others like this. __________________ - -*Z&I* ~~~~

02-06-2019, 11:49 PM	#29 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Justin's car isn't expected to run well into spring 2019. There is a lot of fabricating that needs to be done to build the custom intercooler and piping system, along with a custom coolant expansion tank setup. This thread was created about a year prematurely. He just put the completed built engine back in the car maybe 2 months ago. Its got a ways to go. His engine is using typical VQ37VHR cylinder heads, but yes we did fasten them to the engine with factory Nissan VR38DETT head bolts. This required a whole lot of custom machining. gbrettin, Rusty, madwi and 3 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

02-07-2019, 12:58 PM	#30 (permalink)
jmroy6 Base Member Join Date: Sep 2015 Location: CT Posts: 179 Drives: Spirited Rep Power: 235	How much more torque can you get out of the VR38DETT head bolts compared to a vq37 L19 head studs? Does anyone know what size the VR head bolts are.. 3/8" or 1/2" dia.? __________________ 2012 370z GTM SC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drag race burn out with drag radials.	YzGyz	Track / Autocross / Drifting / Dragstrip	5	03-10-2016 03:49 PM
Drag Racing	StrokeThis347	Track / Autocross / Drifting / Dragstrip	4	04-11-2013 09:15 AM
Ontario Z drag day	Z eliminator	Canada	10	06-26-2010 11:34 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM
My drag truck	Goolsbymd	Other Vehicles	4	10-19-2009 09:06 PM

03-11-2018, 11:37 PM	#19 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	just slap on a set of kw v3 and u good haha

01-31-2019, 08:01 PM	#23 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	How much longer do we have to wait before your car is up and running?

01-31-2019, 09:27 PM	#24 (permalink)
sc10692 Base Member Join Date: Jul 2017 Location: MA Posts: 3 Drives: 2013 G37s 6mt Sedan Rep Power: 8	What's the benefit of using VR heads instead of VQ35HR?

01-31-2019, 10:08 PM	#26 (permalink)
sc10692 Base Member Join Date: Jul 2017 Location: MA Posts: 3 Drives: 2013 G37s 6mt Sedan Rep Power: 8	Read OP quick and it looks like he's just using the VR head bolts nvm