Nissan 370Z Forum  

[Build Thread] -- Journey to 700+ WHP [Supercharger]

To be fair, this idler pulley popping off means it wasn't torqued properly to begin with. Which means this is 100% IPP's fault. Nobody touched that pulley ever since the

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree1043Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 02-15-2019, 08:29 PM   #376 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

To be fair, this idler pulley popping off means it wasn't torqued properly to begin with. Which means this is 100% IPP's fault.
Nobody touched that pulley ever since the engine was given to me, because there was no reason to touch it.
Am I going to call IPP and tell them it's their fault? Probably not.

Unless the pulley came out and cracked my block causing a hole somewhere which makes oil leaks that will cost a fortune to fix, only then will I fight IPP for that. I'm still under warranty technically since it's only february and I didn't purchase the block and get it to me until like April / May ish of last year.

Lol.

So many issues I'm laughing about it now at this point.

I'm thinking to bring it to one person who is extremely mechanically inclined, and having them look over the entire car and look for any critical issues that may be, and have it fixed then and there.

Tired of playing the exponentially growing whack-a-mole game with these issues haha
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote
Old 02-15-2019, 08:42 PM   #377 (permalink)
A True Z Fanatic
 
redondoaveb's Avatar
 
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,359
Drives: 2014 Nismo Gunmetal
Rep Power: 2684374
redondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond repute
Default

Quote:
Originally Posted by cupcakez View Post
To be fair, this idler pulley popping off means it wasn't torqued properly to begin with. Which means this is 100% IPP's fault.
Nobody touched that pulley ever since the engine was given to me, because there was no reason to touch it.
Am I going to call IPP and tell them it's their fault? Probably not.

Unless the pulley came out and cracked my block causing a hole somewhere which makes oil leaks that will cost a fortune to fix, only then will I fight IPP for that. I'm still under warranty technically since it's only february and I didn't purchase the block and get it to me until like April / May ish of last year.

Lol.

So many issues I'm laughing about it now at this point.

I'm thinking to bring it to one person who is extremely mechanically inclined, and having them look over the entire car and look for any critical issues that may be, and have it fixed then and there.

Tired of playing the exponentially growing whack-a-mole game with these issues haha
Get it to Eugene.
cupcakez likes this.
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp
redondoaveb is offline   Reply With Quote
Old 02-15-2019, 08:44 PM   #378 (permalink)
Track Member
 
Join Date: Oct 2014
Location: Orlando, Florida
Posts: 694
Drives: 15' Nismo Black 6MT
Rep Power: 10081
solidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond reputesolidus has a reputation beyond repute
Default

I dunno what to tell you about your build but my IPP stage two is on the left in the picture just like it came off the pallet. Everything else was transferred from my block on the right.
Attached Images
File Type: jpg imagejpeg_0(3).jpg (247.9 KB, 27 views)
Rusty and cupcakez like this.
solidus is offline   Reply With Quote
Old 02-15-2019, 08:53 PM   #379 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

Quote:
Originally Posted by solidus View Post
I dunno what to tell you about your build but my IPP stage two is on the left in the picture just like it came off the pallet. Everything else was transferred from my block on the right.
Oh man. I think you're totally right haha

Now I know who to blame for that pulley then, thanks! Good thing you reminded me cuz i actually never saw the block when it came in from IPP.
I assumed it came with pulleys and everything but nope.

It was actually my mechanic who worked on the Red Z last year.

Damnit. Okay.
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote
Old 02-15-2019, 08:54 PM   #380 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

Quote:
Originally Posted by redondoaveb View Post
Get it to Eugene.
On it already. I let him know that next week I will bring the car to him either if it's drive-able by tomorrow I will drive it there sometime next week, or I will get it towed there using 1/4 of my AAA tows of the year.

He said it was alright to bring it to him.

He was actually supposed to look at it anyways but the car broke before I could even get it to him and it was raining over there too so that's another reason why he told me not to bring it to him.



EDIT:

I'm having AAA tow it to his house tomorrow morning. Since they are least busy at that time and least traffic too since Saturday morning!
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||

Last edited by cupcakez; 02-15-2019 at 09:28 PM.
cupcakez is offline   Reply With Quote
Old 02-16-2019, 03:56 AM   #381 (permalink)
A True Z Fanatic
 
jchammond's Avatar
 
Join Date: Nov 2014
Location: South Carolina
Age: 57
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394
jchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond reputejchammond has a reputation beyond repute
Default

Rough Ride
Hopefully you’ll get everything straightened out
"Z"en, cupcakez and bunk like this.
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html
jchammond is offline   Reply With Quote
Old 02-16-2019, 04:21 AM   #382 (permalink)
A True Z Fanatic
 
madwi's Avatar
 
Join Date: Sep 2012
Location: West Michigan
Posts: 31,410
Drives: Granma red Z
Rep Power: 2684429
madwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond reputemadwi has a reputation beyond repute
Default

Quote:
Originally Posted by cupcakez View Post
On it already. I let him know that next week I will bring the car to him either if it's drive-able by tomorrow I will drive it there sometime next week, or I will get it towed there using 1/4 of my AAA tows of the year.
Hey, man. You like to play cards at all? We get a game of poker going every now and then... Hope your luck changes for the better, soon.
jwick, Rusty, ZontheRocks and 3 others like this.
madwi is offline   Reply With Quote
Old 02-16-2019, 10:10 AM   #383 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

Quote:
Originally Posted by madwi View Post
Hey, man. You like to play cards at all? We get a game of poker going every now and then... Hope your luck changes for the better, soon.
You and me both man.
I really hope it changes for the better too.
Tbh, 2019 has been better overall than 2018 has.

Last year in the first 2 months of 2018 my engine threw a rod causing 3 giant holes in it.

This year first two months I only lost the compresser idler pulley lol.

And yes I love cards xD

I appreciate you all and for following this rough journey of mine, and for always supporting the entire time. It really does mean a lot and I wanted to share that with you all

My hope is that leaving the car with Eugene for a few days, the car will be street driveable without something popping off, leaking, overheating, breaking, etc. Haha.

Will defs keep you all updated!!!
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote
Old 02-16-2019, 10:29 AM   #384 (permalink)
A True Z Fanatic
 
redondoaveb's Avatar
 
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,359
Drives: 2014 Nismo Gunmetal
Rep Power: 2684374
redondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond reputeredondoaveb has a reputation beyond repute
Default

Quote:
Originally Posted by cupcakez View Post
You and me both man.
I really hope it changes for the better too.
Tbh, 2019 has been better overall than 2018 has.

Last year in the first 2 months of 2018 my engine threw a rod causing 3 giant holes in it.

This year first two months I only lost the compresser idler pulley lol.

And yes I love cards xD

I appreciate you all and for following this rough journey of mine, and for always supporting the entire time. It really does mean a lot and I wanted to share that with you all

My hope is that leaving the car with Eugene for a few days, the car will be street driveable without something popping off, leaking, overheating, breaking, etc. Haha.

Will defs keep you all updated!!!
I don't think Eugene will let your car leave his shop if it's NOT street driveable, if something is popping off, leaking or overheating. With your track record, I don't think he can guarantee the breaking part. 🤣
"Z"en and cupcakez like this.
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp
redondoaveb is offline   Reply With Quote
Old 02-16-2019, 10:30 AM   #385 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

Quote:
Originally Posted by redondoaveb View Post
I don't think Eugene will let your car leave his shop if it's NOT street driveable, if something is popping off, leaking or overheating. With your track record, I don't think he can guarantee the breaking part. 🤣
Haha you know what I mean you silly!!!!
I just want it better off than what it is now.
Ofc i cant get a gaurantee but hey i honestly feel safest with the vehicle in his hands than anyone elses' right now xD
Your absolutely right though!!!
redondoaveb likes this.
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote
Old 02-16-2019, 04:25 PM   #386 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

*** Quick Small Update ***

AAA is currently taking my car to Eugene's house shortly.
Eugene has asked to keep the car there for 1 - 2 weeks as to make sure it is safe for when I drive it back home.

I really appreciate the guy more than this statement says.
I didn't expect him to diagnose the car at no charge, and even more -- I did not expect him to ask me to keep the car there for 1 - 2 weeks.

He told me he will do the best he can (and I know he will, especially with how meticulous he is with his work. And that he will even want to put a couple hundred miles on it to make sure the car is running safe and healthy, as well as do a lot of tuning on the car in person which I'm really happy about.

I told him that if my budget allows it, I will ask him to install the AAM Oil Pan Spacer kit as well as my yellow stuff brake pads that I left in the car in case, as well as if the budget allows it -- some brand new genuine akebono rotors as well.

He asked if I wanted to put it on the dyno machine not for tuning for power, but to make sure a few other things is okay with the car. I told him if the budget at the time allows for it, then sure, because it will cost about $600 to do so.

But before any of that I want to make sure it is free of all coolant, oil, transmission, blah blah blah you name it liquid leaks as well as the bolts are torqued to spec, and the parts on the car are genuine OEM parts and not any made in china parts. (I believe the pulley I purchased from O'reilleys was made in china -- the stock idler pulley that goes on the top of the SC bracket next to the jackshaft lol on the serpentine belt).

I also have a new polyurethane engine motor mount to swap in if time / budget allows it but that's not my concern right now so I will highly likely put that off til another time.

There's also some oil leak occurring somewhere in which I don't know where so I'm hoping to God that it is not from a cracked block due to the pulley popping off and hitting my block somehow causing oil leaks, as I saw there was oil above the oil pan and I'm hoping that was from the oil pan itself while driving which made it splash up there and nothing major. But we'll find out.

Stay tuned folks! Updates Updates Updates! Thread's alive again! haha.

Love you all <33
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote
Old 02-20-2019, 06:52 PM   #387 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

*Quick Update*

- Ordered two brand new stub axles to match the 09 Z

- My engine & transmission was being held on by a few bolts (maybe a 3rd or half of the bolts I was supposed to have -- they were completely not there!!!)

- Car has been in Eugene's shop (ByThaBay forum user) for about 4 days now.

- He found a whole slew of issues with the car, but I know it will all be taken care of.

- A custom adapter was made for the oil cooler sandwich plate because the previous one sucked

- Lower Oil Pan was re-gasketed correctly

- As for the stock idler pulley on the engine that slipped out a week ago, Someone damaged the threads before, There is a thread insert in the hole so the original bolt that supposed to go in there doesn't fit -- we need to find right bolt that has correct shoulder for threading to match the thread inserts. Eugene brought it to a machine shop and is getting this taken care of. Guy says he will try to find the correct wider bolt but if not he will find a solution for it somehow, so that's good news for us!

- He recommends I get a new rear control arm, and possibly go back to stock height / stock suspension and get rid of the KW V3's (Not sure if I want to do that though, I love my KW V3s) -- Instead I may just invest in some airbags to deal with any speed bumps / potholes I may run into on the road. He recommends this to avoid a lot of potential damage, since there's a lot of damage under the car from bottoming it out against things and if I put it to stock height it will be a lot safer for me to not damage the car

- Ordered a new battery for my car and wants me to return the YellowTop Optima battery (~$300 for that fresh battery), thankfully I can return it.

- Ordered new differential stopping plates because I was missing them in my car (I don't even know what those are tbh)

- The wiring harness / engine bay harness was redone and took ~5 hours to put properly with the engine still in the car because the wiring was all bad and messed up / in dangerous positions

- Needs new tires because the ones that came with the car when I purchased it are bald (I'm thinking to get R888's or something)


*More updates to come*
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||

Last edited by cupcakez; 02-20-2019 at 07:41 PM.
cupcakez is offline   Reply With Quote
Old 02-20-2019, 07:42 PM   #388 (permalink)
A True Z Fanatic
 
TopgunZ's Avatar
 
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834
TopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond repute
Default

Dang man, you sure you didn't end up with your old car again?? Jk

R888s are great but they become really dangerous in anything but warm weather and perfect road conditions. A little rain will send you all over the place. They are a hair away from Drags.
cupcakez likes this.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM
TopgunZ is offline   Reply With Quote
Old 02-20-2019, 07:43 PM   #389 (permalink)
Track Member
 
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836
cupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond reputecupcakez has a reputation beyond repute
Default

Quote:
Originally Posted by TopgunZ View Post
Dang man, you sure you didn't end up with your old car again?? Jk

R888s are great but they become really dangerous in anything but warm weather and perfect road conditions. A little rain will send you all over the place. They are a hair away from Drags.
Hahah that's what I BE SAYIN!!!! Am I sure my yellow car isn't red underneath? xD

That is good to know. I may not get R888s then since it tends to rain here where I live / travel to often. Definitely not good lol. I may look into some all weather tires then!
__________________
|| ECUTEK (Eugene) || A2A || IPP Built Motor Stage IV Spec || RJM Short Block || Quaife LSD || KW V3 || Stillen-Exhaust || 11.0.1 CR || 928 Full Rebuild || CPZ 34 Row Oil Cooler ||
cupcakez is offline   Reply With Quote
Old 02-20-2019, 07:51 PM   #390 (permalink)
A True Z Fanatic
 
TopgunZ's Avatar
 
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834
TopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond reputeTopgunZ has a reputation beyond repute
Default

I wouldn't go as extreme as all weather. You do live in California. Just find a performance tire that's good in wet conditions. Like Pilot super sports or something. Not cheap but worth it. Trust me.
Rusty, madwi and cupcakez like this.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM
TopgunZ is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GTM Stage 1.5 supercharger build snowsurfdirtx Forced Induction 197 05-07-2017 06:04 AM
RiD3_FaM0uS's Journey to 850+whp Build Thread Rid3_FaM0uS Member's 370Z Gallery 83 03-24-2017 05:06 PM
Fillerbunnie's GTM Stage 1 Supercharger build (Australian RHD) fillerbunnie Forced Induction 46 08-23-2015 01:07 AM
40th Stillen Supercharger Build Nism0 Forced Induction 51 03-23-2015 08:12 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD Reaper42 Forced Induction 14 01-22-2011 05:24 PM


All times are GMT -5. The time now is 02:37 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2