CJM Billet Intake Manifold

cv129 · 02-22-2018, 12:41 PM

An actual finished product
Beautifully finished
No over-promising WHP gain estimate and delivery date

What a breath of fresh air!

bushyguy · 02-23-2018, 05:57 PM

Holy hell!

Zoren 370 · 02-23-2018, 06:17 PM

Absolutely nice breast!!! Sorry got carried away and hallucinated for a sec...nice intakes nipples!

I need to breath some air for awhile such gorgeous pornograpy!!!

Zoren 370 · 02-23-2018, 06:19 PM

Quote:

Originally Posted by cv129

An actual finished product
Beautifully finished
No over-promising WHP gain estimate and delivery date

What a breath of fresh air!

And not for SALE!!! For now....thank goodness. Otherwise Tax accountant would be furious again with my unnecessary expenses!

Spooler · 02-23-2018, 07:12 PM

Phunk, IF for some reason I decide to build my motor in June when the TT's will be installed, would you build me one of these????

phunk · 02-23-2018, 07:37 PM

Quote:

Originally Posted by Spooler

Phunk, IF for some reason I decide to build my motor in June when the TT's will be installed, would you build me one of these????

You can fill out an application and mail it in with the $75 application fee. You will hear back from us within 4 weeks *if* you're found to be a qualified candidate. From here, non-refundable 50% deposits are collected. Then applications will be put into a second then third round of eliminations. The final contestant will receive a manifold within 12 weeks.

But really, these will be available for ordering but production on them will be super slow for the time being. Once we compile the list of custom modifications necessary to install one of these, I think a lot of the buyer interest will fade.

Spooler · 02-23-2018, 07:48 PM

Quote:

Originally Posted by phunk

You can fill out an application and mail it in with the $75 application fee. You will hear back from us within 4 weeks *if* you're found to be a qualified candidate. From here, non-refundable 50% deposits are collected. Then applications will be put into a second then third round of eliminations. The final contestant will receive a manifold within 12 weeks.

But really, these will be available for ordering but production on them will be super slow for the time being. Once we compile the list of custom modifications necessary to install one of these, I think a lot of the buyer interest will fade.

Your not right.... LOL

Rusty · 02-23-2018, 08:02 PM

Quote:

Originally Posted by phunk

You can fill out an application and mail it in with the $75 application fee. You will hear back from us within 4 weeks *if* you're found to be a qualified candidate. From here, non-refundable 50% deposits are collected. Then applications will be put into a second then third round of eliminations. The final contestant will receive a manifold within 12 weeks.

But really, these will be available for ordering but production on them will be super slow for the time being. Once we compile the list of custom modifications necessary to install one of these, I think a lot of the buyer interest will fade.

This looks like a hunting application for an elk hunt I applied for in a western state last year.

V1H · 02-24-2018, 02:34 AM

That intake looks out if this world gorgeous. Piece of art!

Sent from my iPhone using Tapatalk

Spooler · 12-05-2018, 01:59 PM

I wish I could get one of these. I just come by every now and then to drool over it. I wish they were ready to go. This would be a done deal.

Felix 808 · 12-05-2018, 03:46 PM

Wow very nice Charles as always

I missed this in my catch-up post reading (making up a lot of lost time).

Interesting location for the throttle bodies though, I would think you would be absorbing a lot of heat off the radiator. Looking forward to seeing more.

phunk · 12-05-2018, 03:55 PM

Here is the last pics I was given of the customers car that is using the intake in the original post.

phunk · 12-05-2018, 03:58 PM

We just finished up the second one last week for Justin Blackwells car (the 9 second stock engine car). We havent posted it yet because we are playing with custom engraving patterns on it. Maybe in a week or so we will show it off and let everyone decide if it looks any good or if we should just surface it all back down to normal billet machine look.

Spooler · 12-05-2018, 04:01 PM

Quote:

Originally Posted by phunk

We just finished up the second one last week for Justin Blackwells car (the 9 second stock engine car). We havent posted it yet because we are playing with custom engraving patterns on it. Maybe in a week or so we will show it off and let everyone decide if it looks any good or if we should just surface it all back down to normal billet machine look.

Well, will you sell me one?

Rusty · 12-05-2018, 04:06 PM

Quote:

Originally Posted by phunk

Here is the last pics I was given of the customers car that is using the intake in the original post.

Question. Will that manifold fit under a stock hood?

02-22-2018, 12:41 PM	#46 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,236 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	An actual finished product Beautifully finished No over-promising WHP gain estimate and delivery date What a breath of fresh air! phunk, Spartan 1771, jwick and 10 others like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

02-23-2018, 05:57 PM	#47 (permalink)
bushyguy Base Member Join Date: Mar 2016 Location: Paso Robles, CA Posts: 48 Drives: 2011, Blue, MT, 370z Rep Power: 9	Holy hell! phunk likes this.

02-23-2018, 06:17 PM	#48 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Absolutely nice breast!!! Sorry got carried away and hallucinated for a sec...nice intakes nipples! I need to breath some air for awhile such gorgeous pornograpy!!! phunk, cv129 and Rusty like this.

02-24-2018, 02:34 AM	#54 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3367	That intake looks out if this world gorgeous. Piece of art! Sent from my iPhone using Tapatalk phunk likes this. __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

12-05-2018, 03:46 PM	#56 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2807	Wow very nice Charles as always I missed this in my catch-up post reading (making up a lot of lost time). Interesting location for the throttle bodies though, I would think you would be absorbing a lot of heat off the radiator. Looking forward to seeing more. __________________ Semper Fi Μολὼν λαβέ

02-23-2018, 07:12 PM	#50 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Phunk, IF for some reason I decide to build my motor in June when the TT's will be installed, would you build me one of these????

12-05-2018, 01:59 PM	#55 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	I wish I could get one of these. I just come by every now and then to drool over it. I wish they were ready to go. This would be a done deal.

12-05-2018, 03:58 PM	#58 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	We just finished up the second one last week for Justin Blackwells car (the 9 second stock engine car). We havent posted it yet because we are playing with custom engraving patterns on it. Maybe in a week or so we will show it off and let everyone decide if it looks any good or if we should just surface it all back down to normal billet machine look. JARblue and Rusty like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAM Intake Manifold	mults	Intake/Exhaust	81	11-26-2018 08:14 AM
[FOR SALE] (BNIB) OEM Intake Manifold Gaskets///Exhaust Manifold Gaskets	BlkNismo	Parts for sale (Private Classifieds)	19	08-13-2016 01:01 PM
selling used stillen G3 intake.Motordyne M370 Intake Manifold	01206	Canada	4	04-14-2016 02:31 AM
intake plenum vs intake manifold?	louiey370z	Engine & Drivetrain	5	01-07-2016 10:49 AM
Billet intake manifold	Elmo370z	Engine & Drivetrain	46	10-04-2015 11:16 AM