Topgunz full supercharger kits!!

turtle64b · 06-16-2018, 12:38 PM

Quote:

Originally Posted by G3RSTY7

Any idea what fuel psi we should be running with this kit on 1050x injectors on return fuel system on flex fuel tune? Seb hasn’t chimed in I’m running 48-50psi, just seems like it could make a difference?

Seb told me 51 or 52 lbs and to set it with the vacuum line disconnected so that the regulator sees atmospheric pressure. That way it regulates properly based on manifold pressure.

Dave s · 06-17-2018, 04:44 AM

Has anyone considered a V3 head unit from A&A corvette with the Ti trim wheel?

http://aacorvette.com/shop/product/ti-trim-head-units/

ANMVQ · 06-19-2018, 08:38 AM

Quote:

Originally Posted by TopgunZ

Hey bud its been a while. I have not sold a kit to any Q50 owners yet but it looks like you are rockin one now. AWD!

Hey

, So does you kit fir the sedans? Just curious cause it seems I'm seeing a lot of talk over on MYG37 and guys are saying the kit will not fit a sedan? The intake pipe is to short? Thanx man!

TopgunZ · 06-19-2018, 09:10 AM

This kit will NOT fit a sedan. Sorry.

However, I imagine the fix isnt too dificult. Looks like you need to extend the L pipe off the hot side about 6" straight then the turn on the Y pipe would get cut off and would need another 6" straight and probably a different angled coupler. Bring your car over, Ill get it to fit.

ANMVQ · 06-19-2018, 01:41 PM

Quote:

Originally Posted by TopgunZ

This kit will NOT fit a sedan. Sorry.

However, I imagine the fix isnt too dificult. Looks like you need to extend the L pipe off the hot side about 6" straight then the turn on the Y pipe would get cut off and would need another 6" straight and probably a different angled coupler. Bring your car over, Ill get it to fit.

Thanx man, I wish just a little bit of a drive

LOL. Just curious as you know I hoping to do this next spring. Thanx for the info.

"Z"en · 06-20-2018, 08:16 AM

Quote:

Originally Posted by Dave s

Has anyone considered a V3 head unit from A&A corvette with the Ti trim wheel?

Ti Trim Head Units – A&A Corvette Performance, Your C5, C6 & C7 Corvette Supercharger Specialist

Yes. However, they do not provide "trade-in" for Sci owner so I decided to go different route.

nizzan4u2nv · 06-21-2018, 05:30 PM

Would this set up benefit at all from lets say a z1 ported lower intake manifold and 65mm ported oem tbs or eps 70mm tbs?

Chindian01 · 06-21-2018, 06:56 PM

How much to ship to Alaska? When can you ship?

TopgunZ · 06-21-2018, 08:14 PM

Quote:

Originally Posted by nizzan4u2nv

Would this set up benefit at all from lets say a z1 ported lower intake manifold and 65mm ported oem tbs or eps 70mm tbs?

Boost always loves breathing mods. More air in more air out... power.

Both the 700whp guys did those mods. The ported lower anyway. Not sure on the tbs.

TopgunZ · 06-21-2018, 08:16 PM

Quote:

Originally Posted by Chindian01

How much to ship to Alaska? When can you ship?

I'll pm u a price later.

I can't ship for a couple of weeks. The summer boost itch has cleaned me out. More kits currently in the works.

cupcakez · 06-21-2018, 11:06 PM

Quote:

Originally Posted by TopgunZ

Boost always loves breathing mods. More air in more air out... power.

Both the 700whp guys did those mods. The ported lower anyway. Not sure on the tbs.

Good to know and duly noted.

I will put a ported lower manifold on my list xD
At least for the Ported lowers, not the TB's..haha

nizzan4u2nv · 06-22-2018, 10:04 AM

Quote:

Originally Posted by TopgunZ

Boost always loves breathing mods. More air in more air out... power.

Both the 700whp guys did those mods. The ported lower anyway. Not sure on the tbs.

Definitely good to know. Reason I ask is because I want to do bolt ons until I pay the car off and want to have the majority of the mods compatible with the supercharged setup 👍

cupcakez · 06-22-2018, 11:26 AM

Anyone know where the location of the Omni 4 Bar Sensor would go when installing it?
My mechanic is asking and he isn't sure, and neither am I.

Anyone can help with this?

Also where would a fresh pair of o2 sensors go? Is it the top or bottom of the exhaust?
If it's the top it would mean we have to remove the entire exhaust...if it's the bottom then it would mean it's easy as pie.

Please and thank you for responses!

TopgunZ · 06-22-2018, 11:47 AM

It replaces the old MAP sensor your car already has.

Swap them into the down pipes. Hopefully, test pipes and not cats.

cupcakez · 06-22-2018, 12:03 PM

Thanks Topz.
We are extremely close.
And yea I did a typo I meant to say that the other option was to use the stock 370z reservoir and put that back in stock location which is what we did lol

06-17-2018, 04:44 AM	#152 (permalink)
Dave s Base Member Join Date: Sep 2012 Location: Australis Posts: 36 Drives: 10 370z red at7 Rep Power: 13	Has anyone considered a V3 head unit from A&A corvette with the Ti trim wheel? http://aacorvette.com/shop/product/ti-trim-head-units/ TopgunZ likes this.

06-19-2018, 09:10 AM	#154 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	This kit will NOT fit a sedan. Sorry. However, I imagine the fix isnt too dificult. Looks like you need to extend the L pipe off the hot side about 6" straight then the turn on the Y pipe would get cut off and would need another 6" straight and probably a different angled coupler. Bring your car over, Ill get it to fit. ANMVQ, ZontheRocks and JLarson like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

06-22-2018, 11:47 AM	#164 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	It replaces the old MAP sensor your car already has. Swap them into the down pipes. Hopefully, test pipes and not cats. turtle64b and cupcakez like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

06-22-2018, 12:03 PM	#165 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	Thanks Topz. We are extremely close. And yea I did a typo I meant to say that the other option was to use the stock 370z reservoir and put that back in stock location which is what we did lol Last edited by cupcakez; 06-22-2018 at 01:03 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
street /carb legal turbo or supercharger kits	pyrrhus17	Engine & Drivetrain	9	03-08-2023 06:37 PM
2012-2016 Nismo STILLEN Supercharger Kits on Sale!	Team_STILLEN	Sponsor Classifieds	0	07-12-2016 03:05 PM
STILLEN Supercharger 2009-2011 370Z kits - $500 off!	Team_STILLEN	Sponsor Classifieds	3	06-19-2016 02:06 PM
[FOR SALE] stilllen supercharger full kit.	btimola	Parts for sale (Private Classifieds)	22	12-14-2014 09:23 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 04:23 PM

06-21-2018, 05:30 PM	#157 (permalink)
nizzan4u2nv Base Member Join Date: Sep 2017 Location: san diego ca Posts: 25 Drives: 11 NISMO Rep Power: 8	Would this set up benefit at all from lets say a z1 ported lower intake manifold and 65mm ported oem tbs or eps 70mm tbs?

06-21-2018, 06:56 PM	#158 (permalink)
Chindian01 Base Member Join Date: Jan 2018 Location: Alaska Posts: 57 Drives: 18 370Z MB 6MT Rep Power: 7	How much to ship to Alaska? When can you ship?

06-22-2018, 11:26 AM	#163 (permalink)
cupcakez Track Member Join Date: Oct 2017 Location: California Posts: 635 Drives: 2009-7AT-Base-Coup Rep Power: 4836	Anyone know where the location of the Omni 4 Bar Sensor would go when installing it? My mechanic is asking and he isn't sure, and neither am I. Anyone can help with this? Also where would a fresh pair of o2 sensors go? Is it the top or bottom of the exhaust? If it's the top it would mean we have to remove the entire exhaust...if it's the bottom then it would mean it's easy as pie. Please and thank you for responses!