STAGE 2 GTM supercharger BOV OPTIONS

Jinxx · 05-20-2018, 04:57 PM

Quote:

Originally Posted by axio

I mean I'd just connect it with a short tube so that the overall length is close to what it currently is. Maybe cut the tube to 2" or so. But you think the tube won't hold up to heat and pressure if I made it short? I figure the IC piping is connected by silicone couplers....

Sent from my SM-G950U using Tapatalk

It would hold yes ..but still I wouldn’t recommend

axio · 05-20-2018, 06:20 PM

Understood. I'll call Tial tomorrow to confirm the V flange kit has everything needed, thanks guys

Sent from my SM-G950U using Tapatalk

axio · 06-05-2018, 12:26 AM

And here we go... The ugliest brazing job in the history of mankind... But I think it will hold...

Sent from my SM-G950U using Tapatalk

R3drckt09 · 06-05-2018, 10:39 AM

As long as it doesn't leak!

kentmo280z · 06-05-2018, 07:03 PM

Got grinder...? ��

axio · 06-06-2018, 12:12 AM

OK guys, got it mounted back up, started up the engine and the valve opens up and stays open at idle.... Sigh. This is the 1.5 lb spring.... Turn off the engine, closes back up again.. What is going on....

EDIT : just read on a supercharger, the valve SHOULD be open, so I guess everything is probably OK then? Man it's loud, at least with the bumper off and in my garage, it's loud haha

Sent from my SM-G950U using Tapatalk

Jinxx · 06-06-2018, 09:40 PM

[QUOTE=axio;3762305]OK guys, got it mounted back up, started up the engine and the valve opens up and stays open at idle.... Sigh. This is the 1.5 lb spring.... Turn off the engine, closes back up again.. What is going on....

EDIT : just read on a supercharger, the valve SHOULD be open, so I guess everything is probably OK then? Man it's loud, at least with the bumper off and in my garage, it's loud haha

It’s supposed to be open at idle ....and close when you hit the pedal ...open when pedal is lifted ...I did change spring out to the 5 lbs spring with no issue.....and yes loud ...even with bumper on lol

scope22 · 06-06-2018, 10:36 PM

On cold engine mine stays open till like 3rd gear or if i let the car warm up for like 2mins...vacuum leak?

axio · 06-09-2018, 08:16 PM

OK finally took her out. You guys aren't kidding - Tial QRJ sounds SO much better than the Turbosmart hahaha

It just opens and closes so much quicker and responsively too vs the Turbosmart. I did stay open at idle, but it seemed to shut, or perhaps partial open while idling, once the car warmed up, so I think it's good to go lol

Sent from my SM-G950U using Tapatalk

kentmo280z · 06-10-2018, 11:23 AM

Quote:

Originally Posted by axio

OK finally took her out. You guys aren't kidding - Tial QRJ sounds SO much better than the Turbosmart hahaha

It just opens and closes so much quicker and responsively too vs the Turbosmart. I did stay open at idle, but it seemed to shut, or perhaps partial open while idling, once the car warmed up, so I think it's good to go lol

Sent from my SM-G950U using Tapatalk

If you want to quiet it down, you can run a filter off the outlet. , (I ran an L- shaped hose to a small K& N air filter) and wrapped the filter with foam. Made a huge difference in the noise. I preferred to have it quiet.

05-20-2018, 06:20 PM	#32 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 16	Understood. I'll call Tial tomorrow to confirm the V flange kit has everything needed, thanks guys Sent from my SM-G950U using Tapatalk __________________ GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s

06-05-2018, 12:26 AM	#33 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 16	And here we go... The ugliest brazing job in the history of mankind... But I think it will hold... Sent from my SM-G950U using Tapatalk __________________ GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s

06-05-2018, 10:39 AM	#34 (permalink)
R3drckt09 Base Member Join Date: Jul 2013 Location: Texas Posts: 145 Drives: 09 Nissan 370Z Base Rep Power: 12	As long as it doesn't leak! axio likes this.

06-05-2018, 07:03 PM	#35 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	Got grinder...? �� axio likes this.

06-06-2018, 12:12 AM	#36 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 16	OK guys, got it mounted back up, started up the engine and the valve opens up and stays open at idle.... Sigh. This is the 1.5 lb spring.... Turn off the engine, closes back up again.. What is going on.... EDIT : just read on a supercharger, the valve SHOULD be open, so I guess everything is probably OK then? Man it's loud, at least with the bumper off and in my garage, it's loud haha Sent from my SM-G950U using Tapatalk __________________ GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s Last edited by axio; 06-06-2018 at 01:16 AM.

06-06-2018, 09:40 PM	#37 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	[QUOTE=axio;3762305]OK guys, got it mounted back up, started up the engine and the valve opens up and stays open at idle.... Sigh. This is the 1.5 lb spring.... Turn off the engine, closes back up again.. What is going on.... EDIT : just read on a supercharger, the valve SHOULD be open, so I guess everything is probably OK then? Man it's loud, at least with the bumper off and in my garage, it's loud haha It’s supposed to be open at idle ....and close when you hit the pedal ...open when pedal is lifted ...I did change spring out to the 5 lbs spring with no issue.....and yes loud ...even with bumper on lol

06-06-2018, 10:36 PM	#38 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	On cold engine mine stays open till like 3rd gear or if i let the car warm up for like 2mins...vacuum leak?

06-09-2018, 08:16 PM	#39 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 16	OK finally took her out. You guys aren't kidding - Tial QRJ sounds SO much better than the Turbosmart hahaha It just opens and closes so much quicker and responsively too vs the Turbosmart. I did stay open at idle, but it seemed to shut, or perhaps partial open while idling, once the car warmed up, so I think it's good to go lol Sent from my SM-G950U using Tapatalk Jinxx likes this. __________________ GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM supercharger stage 1	turbooo	Forced Induction	1	09-01-2015 09:18 AM
GTM Supercharger Stage 1 w/ F.I. LTH	theDreamer	Forced Induction	140	03-16-2013 05:50 PM
[FOR SALE] Used Gtm stage 1 supercharger kit	Jamaica	Parts for sale (Private Classifieds)	58	06-20-2012 10:12 PM