Preparation for the STILLEN supercharger

Originally Posted by 1slow370

10,000 is high 6,000 is low, my guess after looking at the cost of similar parts is 6,995 for the base non-intercooled option 7,500 for the well equiped intercooled race kit and probably 7,995 for the intercooled + warranty kit

If you built this kit in your garage somehow and only paid parts price and spent half a year fabricating you would still need 5grand to buy the components. 1000 manufacturing labor is nothing for the amount of time it takes to make some of those parts just to give you a clue about it I work at a machine shop and we charge $120 an hour for just basic machining boring bar work is over 200 an hour and there is probably a solid 20 hours in one of those kits. Just thank your lucky stars they don't charge you industrial machine rate.

Originally Posted by Minicobra1

Your all wrong, this is California, the economy sucks and sales are down, this will be $199 installed and we get a free trip to Disneyland

Originally Posted by Zed-Hed

How much weight does the complete package add?

Originally Posted by travisjb

there has been some speculation that it'd be around +60 lbs

Originally Posted by frost

Nothing a good diet can't fix. To the gym fellas.

Originally Posted by G37Sam

You have a good time, I'll stick to removing my spare wheel and chopping off my left leg as I won't be needing it loool

Originally Posted by Aldweik

(as I see it) Stillen might have a hard time getting the car to run right with the 2 MAFs on the same charge tube.... I mean I stand for correction if I'm wrong but don't banks 1 & 2 generally get different data readings and voltages respectively? How can these variables ever be safely tuned out of what the (already sensitive) ECU wants to see?

Originally Posted by fstrnldr

Honestly yes i think the stillen piping looks like something i would see on homemade turbo .com. While i've not seen it in person, the Y portion looks like it will flow horribly. (could just be the glimpse we get in the video, i'm waiting to see it in person). If you want to continue to compare the two kits my next worry about the stillen kit would be the SC sitting so far away from engine, which seems similar to the previous vortech kits. That usually causes a lot of deflection in the bracket contributing to the belt slippage that everyone complains about. Hopefully they learned a lesson and added a way to stiffen that thing up a bit. Final concern with the stillen kit would be MAF location. i'm waiting to see where they actually put them, but i'm guessing they are going to have to share that main charge pipe. Not sure how the factory ECU is going to like that, or the fact that they are not reading a real intake air temp. Unless they add another IAT sensor post intercooler how will the tune know to change if the temp changes? I mean you can make the most efficient IC set up in the world, but it will change temps to some degree through the course of driving/racing etc, and the ECU should be able to see this to properly compensate.