Preparation for the STILLEN supercharger

G37Sam · 01-20-2010, 05:55 PM

Being tested on a G????

WOW

RCZ · 01-20-2010, 06:02 PM

^ Ya...they dont care if the G blows up. Valuable info for the Z development

SeeyaBud86 · 01-20-2010, 07:06 PM

Quote:

Originally Posted by RCZ

^ Ya...they dont care if the G blows up. Valuable info for the Z development

Lol. So true.

G37Sam · 01-20-2010, 07:17 PM

hahahaha touché

I don't mind the bigger brother taking the beating for the smaller one

travisjb · 01-20-2010, 08:58 PM

umm, you might just be outnumbered here, Sam

Buddy Revell · 01-20-2010, 09:34 PM

LOL, G or Z who cares? We have the same engine, so whatever the kit's being developed on is good for everyone.

RCZ · 01-21-2010, 12:17 AM

^ we know..thanks for killing the fun though. You fun killing revell.

Minicobra1 · 01-21-2010, 04:11 AM

This will give an idea on the kind of numbers we can expect, although completely different car and engine, the base HP is about the same, and I'm assuming we will be running 6-10lbs of boost.

2010 Mustang GT, stock pull was 277 hp 299 torque after the Vortech V3 install 444 hp, 400 torque with 10lbs of boost. This was a warranty install with a safe tune.

Here is a video, different car, you can hear the sound of the V3, on a mustang,
hood is up though.

http://www.youtube.com/watch?v=PTvvl...eature=channel

G37Sam · 01-21-2010, 04:14 AM

A Ford Mustang has a compression ratio of around 9.8 and a bigger displacement.. hmmm

RCZ · 01-21-2010, 09:14 AM

Yep, throws all the calculations off. Their 9.8:1 cr is completely different than our 11:1 cr. Based on that figure, we will make more hp per pound of boost introduced into the engine.

SeeyaBud86 · 01-21-2010, 09:28 AM

Yup. I'm going to guess around 500ish for our kit. I guess we shall see soon because they are going to give an update on the G.

RCZ · 01-21-2010, 09:41 AM

My guess is 460 range for the race kit.

Buddy Revell · 01-21-2010, 09:45 AM

Quote:

Originally Posted by RCZ

Yep, throws all the calculations off. Their 9.8:1 cr is completely different than our 11:1 cr. Based on that figure, we will make more hp per pound of boost introduced into the engine.

Keep in mind the '05 and '10 Mustang GT has a 4.6 liter V8. Quite far off from the VQ37 to make comparisons. Even the old VQ35 in the 350/G35 would be a better comparison. Haha, I'm a fun killer? Perhaps, LOL.

LaSeeno · 01-21-2010, 10:36 AM

Quote:

Originally Posted by SeeyaBud86

Yup. I'm going to guess around 500ish for our kit. I guess we shall see soon because they are going to give an update on the G.

No way, that's a 50% increase.

I wouldn't expect too much more than 400.

SeeyaBud86 · 01-21-2010, 10:44 AM

We'll see what Stillen comes up with...I'd be fine with 400 as well...

01-20-2010, 05:55 PM	#166 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	Being tested on a G???? WOW __________________ '14 Viper GTS '08 RB'd G37S - Sold

01-20-2010, 07:17 PM	#169 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	hahahaha touché I don't mind the bigger brother taking the beating for the smaller one __________________ '14 Viper GTS '08 RB'd G37S - Sold

01-20-2010, 08:58 PM	#170 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	umm, you might just be outnumbered here, Sam __________________ 2009 370Z #104 For Sale

01-21-2010, 04:11 AM	#173 (permalink)
Minicobra1 A True Z Fanatic Join Date: Nov 2008 Location: Orange County, CA. Posts: 1,205 Drives: 370Z Tour, Spt, 6mt Rep Power: 644	This will give an idea on the kind of numbers we can expect, although completely different car and engine, the base HP is about the same, and I'm assuming we will be running 6-10lbs of boost. 2010 Mustang GT, stock pull was 277 hp 299 torque after the Vortech V3 install 444 hp, 400 torque with 10lbs of boost. This was a warranty install with a safe tune. Here is a video, different car, you can hear the sound of the V3, on a mustang, hood is up though. http://www.youtube.com/watch?v=PTvvl...eature=channel __________________ 370z Tour\| Spt Pack\|Navi\|BERK CBE\|Berk HFC's\| Eibach Springs\| Hotchkis Sway Bars\|SPC Camber Arms\|15mm Ichiba Wheel Spacers\| 19"Factory Nismo Wheels-Matt Black\|Stop Tech Rotors\|TWM Shifter\|3M Tint\|Black Fangs\|Black Rear Valance\|JDM Fog Light\| MY BAND-www.myspace.com/petroleum Last edited by Minicobra1; 01-21-2010 at 04:20 AM.

01-21-2010, 04:14 AM	#174 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	A Ford Mustang has a compression ratio of around 9.8 and a bigger displacement.. hmmm __________________ '14 Viper GTS '08 RB'd G37S - Sold

01-20-2010, 06:02 PM	#167 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	^ Ya...they dont care if the G blows up. Valuable info for the Z development

01-20-2010, 09:34 PM	#171 (permalink)
Buddy Revell Enthusiast Member Join Date: Mar 2009 Location: So Cal Posts: 303 Drives: 08 Infiniti G37 Rep Power: 16	LOL, G or Z who cares? We have the same engine, so whatever the kit's being developed on is good for everyone.

01-21-2010, 12:17 AM	#172 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	^ we know..thanks for killing the fun though. You fun killing revell.

01-21-2010, 09:14 AM	#175 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Yep, throws all the calculations off. Their 9.8:1 cr is completely different than our 11:1 cr. Based on that figure, we will make more hp per pound of boost introduced into the engine.

01-21-2010, 09:28 AM	#176 (permalink)
SeeyaBud86 Enthusiast Member Join Date: Jun 2009 Location: Naples, FL Posts: 480 Drives: 09 PW 370z 6MT Rep Power: 16	Yup. I'm going to guess around 500ish for our kit. I guess we shall see soon because they are going to give an update on the G. __________________ My Z:http://www.the370z.com/members-370z-...l-finally.html 1969 MGB for sale: http://www.the370z.com/other-vehicle...ml#post1238143

01-21-2010, 09:41 AM	#177 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	My guess is 460 range for the race kit.

01-21-2010, 10:44 AM	#180 (permalink)
SeeyaBud86 Enthusiast Member Join Date: Jun 2009 Location: Naples, FL Posts: 480 Drives: 09 PW 370z 6MT Rep Power: 16	We'll see what Stillen comes up with...I'd be fine with 400 as well... __________________ My Z:http://www.the370z.com/members-370z-...l-finally.html 1969 MGB for sale: http://www.the370z.com/other-vehicle...ml#post1238143

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-23-2010 12:05 AM
Southern "Winter" preparation?	Matt	South East Region	1	11-27-2009 06:23 PM
Titan supercharger	madmocasin	Forced Induction	41	11-09-2009 02:23 AM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 01:09 AM