Air to Air SC New build

StillenZ84 · 07-04-2017, 12:50 AM

I figured I would start another thread on my build and plans. In the past few months I have made some major changes to the car after my motor popped back in December. I immediately purchased a new block and sent it to the machine shop to get the work done. Seb from Specialty Z hooked me up with CP pistons .020 over w/upgraded wrist pins and PRO-H Beam Carrillo Rods with CARR Bolts. I had the heads port and polished along with the Stillen intake manifold, lower intake manifold, and had the exhaust runners ported to match the header gaskets. I also sent my supercharger off to 928 Motorsports and had them install high speed bearings and their impeller. I plan on pushing it to 18 or more PSi at first and go from there. My pulley setup is the Stillen 9 lb, 3.47" Jackshaft, and 2.80" supercharger pulley. Im tuning with no filter on the inlet and hoping for pretty big numbers. I am still having Seb do the tuning and we have starting to tune WOT now so Ill be able to get back on what boost I am actually hitting soon. Here are a few pictures and I can post more later on.

ChaseZ · 07-04-2017, 01:13 AM

In!

synolimit · 07-04-2017, 02:05 AM

Looks like your porter did the heads backwards yo. Left the intake divider alone yet knife edged the exhaust divider. That doesn't make sense.

Optimiser · 07-04-2017, 02:24 AM

"My pulley setup is the Stillen 9 lb, 3.47" Jackshaft, and 2.80" supercharger pulley."

What do you calculate your SC RPM will be will that setup and what diameter is your 9lb pulley?

StillenZ84 · 07-04-2017, 12:05 PM

Quote:

Originally Posted by synolimit

Looks like your porter did the heads backwards yo. Left the intake divider alone yet knife edged the exhaust divider. That doesn't make sense.

The pictures are not of the finished job. They were the first day he had the block.

StillenZ84 · 07-04-2017, 12:08 PM

Quote:

Originally Posted by Optimiser

"My pulley setup is the Stillen 9 lb, 3.47" Jackshaft, and 2.80" supercharger pulley."

What do you calculate your SC RPM will be will that setup and what diameter is your 9lb pulley?

My Stillen pulley is 2.75". I should be mid to high 60k RPM.

Optimiser · 07-04-2017, 07:26 PM

Quote:

Originally Posted by StillenZ84

My Stillen pulley is 2.75". I should be mid to high 60k RPM.

If I have entered the correct numbers of your setup in the Vortech Impeller Speed Calculator you'll be at 70158RPM at 7500RPM (Engine).

https://vortechsuperchargers.com/pag...eed-calculator

TopgunZ · 07-06-2017, 09:20 PM

Can't wait to see the numbers!

BOLIO 671 · 07-07-2017, 08:40 AM

Totally Sub"d......Lovin the no filter set up.....I know u said the pics of the port and polish aren't of the final. product but that thing looks nice and smooth....who did ur head work?

StillenZ84 · 07-07-2017, 06:24 PM

Quote:

Originally Posted by BOLIO 671

Totally Sub"d......Lovin the no filter set up.....I know u said the pics of the port and polish aren't of the final. product but that thing looks nice and smooth....who did ur head work?

Thanks. A shop that specializes in Import port and polishing here local did all the work. They produce a lot of very high HP cars. Everyone has their technique that they think works the best but as long as I gain HP from it Im happy.

Juan@Fontana · 07-07-2017, 07:11 PM

this is going to be bonkers.

RadioFlyer · 07-07-2017, 08:08 PM

Following this thread closely - you might be my Ghost of Christmas Future!

Glad to see you back on the horse(power)!

StillenZ84 · 08-13-2017, 06:23 PM

Just to update everyone. I finished tuning with Seb and was able to get on the dyno. Im hitting between 16-17 psi. I was only able to dyno my daily map that is set to 19 deg of timing due to the heat and humidity here. Car got hot pretty quick. I was able to put down 696/500 on a mustang dyno. I was very happy to say the least and will hopefully be back on the dyno when it cools off in the next few weeks to get numbers for my "kill" mode.

https://www.youtube.com/watch?v=--DQNYil9g4

Jayhovah · 08-13-2017, 06:30 PM

Amazing.

TopgunZ · 08-13-2017, 08:04 PM

700 whp and 500 wtq??!!!!!! I'm more than impressed. Awesome achievement Evan!!!

07-04-2017, 01:13 AM	#2 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94683	In! StillenZ84 likes this.

07-04-2017, 02:05 AM	#3 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Looks like your porter did the heads backwards yo. Left the intake divider alone yet knife edged the exhaust divider. That doesn't make sense. __________________ 13 370z-

07-06-2017, 09:20 PM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Can't wait to see the numbers! StillenZ84 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

07-07-2017, 08:40 AM	#9 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Totally Sub"d......Lovin the no filter set up.....I know u said the pics of the port and polish aren't of the final. product but that thing looks nice and smooth....who did ur head work? StillenZ84 likes this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

07-07-2017, 07:11 PM	#11 (permalink)
Juan@Fontana Enthusiast Member Join Date: Nov 2013 Location: Fontana Posts: 315 Drives: Z32 Rep Power: 21	this is going to be bonkers. StillenZ84 likes this. __________________ Juan Vargas jvargas@fontananissan.com Motorsports Manager, Tech Support & EMS Specialist. https://www.nissanraceshop.com/wp-co...ite-Header.png

07-04-2017, 02:24 AM	#4 (permalink)
Optimiser Enthusiast Member Join Date: Mar 2013 Location: Australia Posts: 455 Drives: 2012 Nissan 370Z MT Rep Power: 20144	"My pulley setup is the Stillen 9 lb, 3.47" Jackshaft, and 2.80" supercharger pulley." What do you calculate your SC RPM will be will that setup and what diameter is your 9lb pulley?

07-07-2017, 08:08 PM	#12 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 40	Following this thread closely - you might be my Ghost of Christmas Future! Glad to see you back on the horse(power)! StillenZ84 likes this.

08-13-2017, 06:23 PM	#13 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	Just to update everyone. I finished tuning with Seb and was able to get on the dyno. Im hitting between 16-17 psi. I was only able to dyno my daily map that is set to 19 deg of timing due to the heat and humidity here. Car got hot pretty quick. I was able to put down 696/500 on a mustang dyno. I was very happy to say the least and will hopefully be back on the dyno when it cools off in the next few weeks to get numbers for my "kill" mode. https://www.youtube.com/watch?v=--DQNYil9g4 370Zsteve, BOLIO 671, TBatt and 2 others like this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

08-13-2017, 08:04 PM	#15 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	700 whp and 500 wtq??!!!!!! I'm more than impressed. Awesome achievement Evan!!! wideglideleon likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Na build	SOUTH-BRONX	40th Anniversary 370Z	15	05-16-2016 02:15 PM
They don't build them like this any more ....	BGTV8	Other Vehicles	3	12-03-2014 01:51 PM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 06:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM