06-03-2017, 10:35 AM
|
#4 (permalink)
|
|
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18
|
Quote:
Originally Posted by hc_416
Correct, When I was logging my car I noticed that the vvel was off. I was wondering what the tolerances to see if they were in spec.
|
Ok yeah the sensor is adjustable. You loosen 2 screws and turn the sensor counter-clockwise and clockwise to adjust. (Forgot which direction is which) It is supposed to read .500 + or - 48 if I am not mistaken. .75 is way off so Im not even sure your car would run being that far off. I would talk to your tuner and see if he has made any adjustments to compensate. Does the car idle correctly? Are you getting a P1090 code at all?
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34
|
|
|
Similar Threads
Threaded Mode
