Do blow off valves need to be cleaned on S/C car?

BOLIO 671 · 02-21-2017, 12:10 PM

Quote:

Originally Posted by Kamillio

Sounds like I will need the Tial. What parts do I need to be able to install the Tial on your kit Topgunz? I searched through your thread and while I found pictures I don't know what the parts are of the sleeves and the metal Tee pipe that the Tial BOV attaches to. Do I get the 38mm or 50mm Tial?

Yes this is what I had to do....the Turbosmart was way worse on flutter...Topz will take care of getting u all the stuff for the Tial set up....

kentmo280z · 02-21-2017, 01:31 PM

I've tried 4 different BOV's on my GTM supercharged setup. Turbosmart was the worst for fluttering., Then tried Synapse Diverter valve. I finally found a Tial QRJ that does not flutter,but was loud as I did not circulate it after upgrading my S.C. to Stage 1.5.
My remedy has been to attach a K& N filter on the BOV output flange and wrap that filter with some 1/2 foam. That really quieted things down.
I'd recommend a maintenance / cleaning -lubricating about as often as changing the oil .Or even more frequently. They do stick and using the turbomsart lube does a nice job also..

Infidel · 02-22-2017, 06:36 AM

I just got done with all this BPV flutter Bullsh*t. What a PITA. The valve still flutters but not under boost. Usually only if I'm cruising about 2K rpm or so and just back off the throttle a bit and it'll flutter. But when I'm romping on it there's no flutter at all, sounds like it should. But any flutter to me sound like crap.

So let me get this straight....you can replace a BPV with a BOV when SC'd ? I've heard two different stories on this.

kentmo280z · 03-01-2017, 06:17 PM

Quote:

Originally Posted by Infidel

I just got done with all this BPV flutter Bullsh*t. What a PITA. The valve still flutters but not under boost. Usually only if I'm cruising about 2K rpm or so and just back off the throttle a bit and it'll flutter. But when I'm romping on it there's no flutter at all, sounds like it should. But any flutter to me sound like crap.

So let me get this straight....you can replace a BPV with a BOV when SC'd ? I've heard two different stories on this.

Take a look at the Tial QRJ , You would have to have the valve flange cut off and the new flange welded back on. Not that big of a deal. The qrj can be recirculated or vent to atmosphere. Only valve that I've used ( and I've tried a shitload of different valves) that does not flutter!!!!
BTW.. I " aquired" that pulley.. lol

Kamillio · 03-01-2017, 06:21 PM

Quote:

Originally Posted by kentmo280z

Take a look at the Tial QRJ , You would have to have the valve flange cut off and the new flange welded back on. Not that big of a deal. The qrj can be recirculated or vent to atmosphere. Only valve that I've used ( and I've tried a shitload of different valves) that does not flutter!!!!

BTW.. I " aquired" that pulley.. lol

Are you talking about the extra pulley to get rid of belt slip?

Sent from my iPhone using Tapatalk

kentmo280z · 03-01-2017, 06:34 PM

Quote:

Originally Posted by Kamillio

Are you talking about the extra pulley to get rid of belt slip?

Sent from my iPhone using Tapatalk

No, There was a pulley for sale that I put dibbs on first that Infidel also wanted ..

Kamillio · 03-01-2017, 06:58 PM

Quote:

Originally Posted by kentmo280z

No, There was a pulley for sale that I put dibbs on first that Infidel also wanted ..

Sent from my iPhone using Tapatalk

turtle64b · 05-06-2020, 07:46 PM

Can anyone link to cleaning instructions for the QRJ? I am getting terrible flutter when cruising under partial throttle.

Thanks!

Optimiser · 05-07-2020, 02:13 AM

Quote:

Originally Posted by turtle64b

Can anyone link to cleaning instructions for the QRJ? I am getting terrible flutter when cruising under partial throttle.

Thanks!

Have you always had that flutter at that speed on a highway or is it new?

The reason I ask is because I have a Tial bov on my a A to A, SC setup and on a highway (on cruise control at about 60MPH/100KMH) when boost is 0 it flutters continually unless I back off or accelerate (changing from negative or to positive boost) then it stops. It's not because it needs cleaning, it is it's normal operation.

turtle64b · 05-07-2020, 03:03 AM

It's either relatively new or it has become much more noticeable. I drive a 70mph road to and from work everyday and the flutter is incessant. Most likely for the reason you described. I've been contemplating going to an over-pressure BOV setup (opens at 12psi, for instance, but remains shut otherwise), this may be the sign haha

redondoaveb · 05-07-2020, 10:13 AM

Quote:

Originally Posted by turtle64b

It's either relatively new or it has become much more noticeable. I drive a 70mph road to and from work everyday and the flutter is incessant. Most likely for the reason you described. I've been contemplating going to an over-pressure BOV setup (opens at 12psi, for instance, but remains shut otherwise), this may be the sign haha

What psi spring is in it?

turtle64b · 05-07-2020, 05:21 PM

Quote:

Originally Posted by redondoaveb

What psi spring is in it?

The 1.5, I believe. The one that shipped with the V1 Topgunz kit.

redondoaveb · 05-07-2020, 05:31 PM

Quote:

Originally Posted by turtle64b

The 1.5, I believe. The one that shipped with the V1 Topgunz kit.

When I had the fluttering issue with the qrj, I switched to the 3 psi and had no issues after that.

shawnberry45 · 10-26-2022, 06:55 PM

Glad I saw this post, having this issue with my SI upgrade. Which color spring is 3psi? Might have to do this ungrade. Getting fluttering between 2500-2900 rpm under acceleration. Performance is fantastic just an irritating noise in that rpm range

shawnberry45 · 10-27-2022, 01:47 AM

Quote:

Originally Posted by shawnberry45

Glad I saw this post, having this issue with my SI upgrade. Which color spring is 3psi? Might have to do this ungrade. Getting fluttering between 2500-2900 rpm under acceleration. Performance is fantastic just an irritating noise in that rpm range

Also does the QRJ need to be relubed when cleaned? if so which kind do you recommend?

02-22-2017, 06:36 AM	#18 (permalink)
Infidel Enthusiast Member Join Date: Mar 2013 Location: Central Florida Posts: 457 Drives: 2013 GM 6MT Rep Power: 14	I just got done with all this BPV flutter Bullsh*t. What a PITA. The valve still flutters but not under boost. Usually only if I'm cruising about 2K rpm or so and just back off the throttle a bit and it'll flutter. But when I'm romping on it there's no flutter at all, sounds like it should. But any flutter to me sound like crap. So let me get this straight....you can replace a BPV with a BOV when SC'd ? I've heard two different stories on this. __________________ BOOSTED

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clean Intake Valves	jrb55gh	Engine & Drivetrain	10	11-30-2016 10:34 PM
Remote-controlled exhaust valves..Check it out	Nico 6	Intake/Exhaust	7	08-19-2015 08:56 AM
[FOR SALE] (2) Brand New Boosted Solutions Blow Off Valves w Aluminum Flanges	zzzzz5	Parts for sale (Private Classifieds)	0	07-30-2015 09:35 PM
VVEL Only on Intake Valves?	drisko	Engine & Drivetrain	14	09-12-2011 08:35 PM
Butterfly valves/silencer on Fast Intentions	SkyZ	Intake/Exhaust	9	03-17-2010 07:14 PM

02-21-2017, 01:31 PM	#17 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	I've tried 4 different BOV's on my GTM supercharged setup. Turbosmart was the worst for fluttering., Then tried Synapse Diverter valve. I finally found a Tial QRJ that does not flutter,but was loud as I did not circulate it after upgrading my S.C. to Stage 1.5. My remedy has been to attach a K& N filter on the BOV output flange and wrap that filter with some 1/2 foam. That really quieted things down. I'd recommend a maintenance / cleaning -lubricating about as often as changing the oil .Or even more frequently. They do stick and using the turbomsart lube does a nice job also..

05-06-2020, 07:46 PM	#23 (permalink)
turtle64b Track Member Join Date: Jun 2015 Location: Granbury, TX Posts: 550 Drives: '11 SC Blue 7AT Rep Power: 3366	Can anyone link to cleaning instructions for the QRJ? I am getting terrible flutter when cruising under partial throttle. Thanks!

05-07-2020, 03:03 AM	#25 (permalink)
turtle64b Track Member Join Date: Jun 2015 Location: Granbury, TX Posts: 550 Drives: '11 SC Blue 7AT Rep Power: 3366	It's either relatively new or it has become much more noticeable. I drive a 70mph road to and from work everyday and the flutter is incessant. Most likely for the reason you described. I've been contemplating going to an over-pressure BOV setup (opens at 12psi, for instance, but remains shut otherwise), this may be the sign haha

10-26-2022, 06:55 PM	#29 (permalink)
shawnberry45 Base Member Join Date: Jul 2012 Location: Chicago, IL Posts: 65 Drives: G37 Rep Power: 13	Glad I saw this post, having this issue with my SI upgrade. Which color spring is 3psi? Might have to do this ungrade. Getting fluttering between 2500-2900 rpm under acceleration. Performance is fantastic just an irritating noise in that rpm range