Custom Stillen 370z supercharged

[Mr.Squeeze]

First I would like to thank Weiboy 718 for the kit. I also would like to thank Josh from Stillen who help me out with getting parts that I needed also Sam from GTM as well. Now I know there are a lot of people that do not like the Stillen kit because of some of the issue's that some people have had with tunes from them. My car is a custom set up I am running more boost than anybody that has this kit or any supercharger I think on a 370z. I am full aware of the risk that I am taking on my own.

Set Up
1.Stillen 8 pound pulley, 928 motorsports impeller
2.Vortech Cog pulleys on the back of the blower to increase boost
3.Motordyne ART Pipes
4.fast intentions exhaust
6.Deatschwerks 600CC injectors
7.Deatschwerks 300 LPH fuel pump
8.CJM Installation Kit
9.Stock clutch and flywheel
10.Turbo Smart bypass valve

My car was Tuned at RT/ Tuning in Lansdale Vince the owner/tuner is great I wouldnt trust anybody else tuning my car he did a great job. For anybody that is in the area check them out.

The install was done by my self and my partner. The car is making 10.5 to 11 pounds of boost at redline on 93 pump gas.The car drives like stock idle's smooth it feels a lot like my vortech 350z I had that made 414whp and 350 torque.


I will put up some pictures of the car later but here is the graph for now.


My old 350z vortech blower and Stillen blower side by side.


Cog pulleys removed from Vortech bracket and installed with cog belt on Stillen bracket.


Stillen blower opened and impeller removed.


Vortech SC trim impeller left 928 motorsports impeller on the right.


My car ready to go under the knife lol stock with only 2600 miles on her.