BOV on Stillen S/C??

TopgunZ

The Tial with a hose that runs the air back into the engine bay with a filter on the end. This will reduce the Dragon quite a bit.

What size inlet and exhaust on the FV?

This is why the tial is so great. It flows twice as much as the turbosmart and Bosch which are a tiny 1".

When I had the turbosmart it sounded like it was dying to breath, getting choked out.

I can verify not enough air was escaping at high rpms but that's a whole story.

The vortech race valve was much better and flowed enough air, not as much as qrj, but had an annoying high pitch to it at light throttle.

The hks was just all around lame.

The only other valve I would try is the big red (procharger) or the vortech mondo.

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

ChaseZ

40mm in, about 1-5/8"
Output is about the same, it comes with a fitting to vent atmosphere- it can be unscrewed for recirc though. Didn't check but think it's similar size.

It sounds like a pretty cool valve, but remains to be seen yet
GReddy

I hadn't thought of running some tube and essentially a muffler on the Tial. I'd have probably gone that way otherwise.