RJ MFG Supercharger kit Feeler...

MadSciSnails · 02-25-2017, 12:19 PM

Everyone is concerned about the subtlety of the hood design. I'm more of the opinion of it works.... in reality a full hood replacement will be the best option for the majority. I'm still keen on the initial rendering personally. However finding someone competent enough to complete the install well will cost the same as a full hood replacement.

Sent from my iPhone using Tapatalk

cooltoy · 02-25-2017, 01:46 PM

The hood will push the cost past 10 gs.

MCLOVIN · 02-25-2017, 02:11 PM

Then you have install...

Sent from my iPhone using Tapatalk Pro

bullitt5897 · 02-25-2017, 02:20 PM

Guys install will be super easy! Like do it in your garage easy! Like not have to be on jack stands... you simply pull your current intake setup out. Pull off your bumper and crash bar. Bolt in the heat exchanger, reservoir tank and lines. Then drop in the lower intake manifold unit once that is in you bolt on the fuel rail section with your new injectors, the rest of the unit can be preassembled on a bench then dropped in and bolted down. Hook up your intake and lines. Then fill the fluids up flash the car double check everything and start the car...

Should take less than 8 hours to install in your garage if your a competent mechanic.

MCLOVIN · 02-25-2017, 02:30 PM

Quote:

Originally Posted by bullitt5897

Guys install will be super easy! Like do it in your garage easy! Like not have to be on jack stands... you simply pull your current intake setup out. Pull off your bumper and crash bar. Bolt in the heat exchanger, reservoir tank and lines. Then drop in the lower intake manifold unit once that is in you bolt on the fuel rail section with your new injectors, the rest of the unit can be preassembled on a bench then dropped in and bolted down. Hook up your intake and lines. Then fill the fluids up flash the car double check everything and start the car...

Should take less than 8 hours to install in your garage if your a competent mechanic.

That's good to know! I have never done an install but that doesn't sound too bad. Will they offer the hoods in a pre painted option?

Sent from my iPhone using Tapatalk Pro

bullitt5897 · 02-25-2017, 03:10 PM

Quote:

Originally Posted by MCLOVIN

That's good to know! I have never done an install but that doesn't sound too bad. Will they offer the hoods in a pre painted option?

Sent from my iPhone using Tapatalk Pro

As of right now I don't think they will. Most people ask this question and when I ran UAM it was the most asked question. The problem with pre paint is they don't have your car there to match to. There are several shades to each color especially pearl white... it's less risky for a customer service perspective to not paint them. If paint is scratched during shipping or if it doesn't match it can be a nightmare on their end!

MCLOVIN · 02-25-2017, 03:13 PM

Gotcha makes sense

Sent from my iPhone using Tapatalk Pro

Elmo370z · 02-25-2017, 03:31 PM

Quote:

Originally Posted by MadSciSnails

Everyone is concerned about the subtlety of the hood design. I'm more of the opinion of it works.... in reality a full hood replacement will be the best option for the majority. I'm still keen on the initial rendering personally. However finding someone competent enough to complete the install well will cost the same as a full hood replacement.

Sent from my iPhone using Tapatalk

That car sounded nasty in person

James10694 · 02-25-2017, 05:01 PM

Quote:

Originally Posted by bullitt5897

Guys install will be super easy! Like do it in your garage easy! Like not have to be on jack stands... you simply pull your current intake setup out. Pull off your bumper and crash bar. Bolt in the heat exchanger, reservoir tank and lines. Then drop in the lower intake manifold unit once that is in you bolt on the fuel rail section with your new injectors, the rest of the unit can be preassembled on a bench then dropped in and bolted down. Hook up your intake and lines. Then fill the fluids up flash the car double check everything and start the car...

Should take less than 8 hours to install in your garage if your a competent mechanic.

And the clutch to hold said 500whp?

bullitt5897 · 02-25-2017, 06:25 PM

Quote:

Originally Posted by James10694

And the clutch to hold said 500whp?

Think Torque not hp... Torque is what breaks parts... at 500whp you will be at ~400ftlbs...

James10694 · 02-25-2017, 08:39 PM

Awesome! I guess everyone can stick with the stock clutch for this build which eliminates dropping the tranny during install!

Optimiser · 02-25-2017, 09:46 PM

Quote:

Originally Posted by James10694

Awesome! I guess everyone can stick with the stock clutch for this build which eliminates dropping the tranny during install!

I don't think so....

Jayhovah · 02-25-2017, 10:08 PM

Quote:

Originally Posted by James10694

Awesome! I guess everyone can stick with the stock clutch for this build which eliminates dropping the tranny during install!

I think that will vary. Some folks have gotten by for a while with the OEM clutch... But I only make 412 ft-lb and mine started letting go on the dyno.

RadioFlyer · 02-26-2017, 12:29 AM

Yeah, I'm only at ~400whp and my clutch was slipping.

James10694 · 02-26-2017, 04:12 AM

I guess I was being overly sarcastic

View Poll Results: What kind of Supercharger kit would you like us to make?
Rotrex C38 based system	54	23.79%
Vortech/Procharger Based Kit	40	17.62%
Whipple Positive Displacement Roots Kit	109	48.02%
I dont want a supercharger.	24	10.57%
Voters: 227. You may not vote on this poll

02-25-2017, 12:19 PM	#421 (permalink)
MadSciSnails Base Member Join Date: Aug 2016 Location: Columbia MS Posts: 121 Drives: '14 370z, 94 300zxTT Rep Power: 9	RJ MFG Supercharger kit Feeler... Everyone is concerned about the subtlety of the hood design. I'm more of the opinion of it works.... in reality a full hood replacement will be the best option for the majority. I'm still keen on the initial rendering personally. However finding someone competent enough to complete the install well will cost the same as a full hood replacement. Sent from my iPhone using Tapatalk Last edited by MadSciSnails; 02-25-2017 at 12:25 PM.

02-25-2017, 01:46 PM	#422 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	The hood will push the cost past 10 gs. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

02-25-2017, 02:20 PM	#424 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Guys install will be super easy! Like do it in your garage easy! Like not have to be on jack stands... you simply pull your current intake setup out. Pull off your bumper and crash bar. Bolt in the heat exchanger, reservoir tank and lines. Then drop in the lower intake manifold unit once that is in you bolt on the fuel rail section with your new injectors, the rest of the unit can be preassembled on a bench then dropped in and bolted down. Hook up your intake and lines. Then fill the fluids up flash the car double check everything and start the car... Should take less than 8 hours to install in your garage if your a competent mechanic. EZT, Hotrodz, jchammond and 3 others like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-25-2017, 08:39 PM	#431 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 916 Drives: 2010 370z Nismo Rep Power: 13	Awesome! I guess everyone can stick with the stock clutch for this build which eliminates dropping the tranny during install! __________________ Boosted Performance Single Turbo 618whp/489 tq

02-25-2017, 02:11 PM	#423 (permalink)
MCLOVIN Base Member Join Date: Jun 2016 Location: Houston Posts: 52 Drives: 2016 370Z NISMO Rep Power: 27	Then you have install... Sent from my iPhone using Tapatalk Pro

02-25-2017, 03:13 PM	#427 (permalink)
MCLOVIN Base Member Join Date: Jun 2016 Location: Houston Posts: 52 Drives: 2016 370Z NISMO Rep Power: 27	Gotcha makes sense Sent from my iPhone using Tapatalk Pro

02-26-2017, 12:29 AM	#434 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 40	Yeah, I'm only at ~400whp and my clutch was slipping.

02-26-2017, 04:12 AM	#435 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 916 Drives: 2010 370z Nismo Rep Power: 13	I guess I was being overly sarcastic __________________ Boosted Performance Single Turbo 618whp/489 tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB stillen Supercharger or GTM Supercharger STG 2	ej z34	Wanted	2	11-23-2016 04:57 AM
[FOR SALE] [Feeler] GTM Stage 1.5 Supercharger Kit	AntiVenom	Parts for sale (Private Classifieds)	19	06-01-2016 03:49 PM
Available soon! FEELER	Rayzz	Parts for sale (Private Classifieds)	7	06-23-2015 02:00 PM
[FOR SALE] Feeler	DEpointfive0	Parts for sale (Private Classifieds)	27	01-13-2015 01:18 PM