Critique my parts list...

ChaseZ · 12-02-2016, 11:38 PM

Quote:

Originally Posted by Jayhovah

It was an emotional rollercoaster.

I don't doubt it.

Makes me glad I have a few months to collect parts and do my build. That said, it isn't my style. I'll probably be in there powering through it like a dirty shirt (with a dirty shirt?) day and night until it's done.

ChaseZ · 12-11-2016, 11:00 AM

Updated the OP parts list. Made the call to run a substantially upgraded A/W setup. Should still see some good gains and is more economical to start out with.

Even beyond that still lots to do in the car with the wrap and decalling for it (company sponsored for events) and all these things add up quick so saving a grand or so over the A/A conversion helps a lot right now.

Not to mention still need set of GramLites and tires too, along with a brake upgrade (trying to score a set off a wrecked Nismo).

Here is the updated SC list so far:

Amended list:

Stillen SC, impeller upgrade and 9psi pulley
FrozenBoost 101 Intercooler
Bosch 850cc injectors
K&N filter, right on the blower
Greddy FV BOV
Relocate MAF to charge pipe
Speed density tuning
Walbro 485 pump
CJM hat and 10mm return kit
GTR Plugs
AMS Alpha GTR 4 bar MAP sensor

OS Giken 1.5
Whiteline Diff bushing
SouthBend Stage 3 Street clutch and flywheel (quiet one)
CSC Elminator

AEM Failsafe Boost/AFR Gauge

Upgrade oil cooler to 34 row (will try it out first)

Ecutek reflash

Possibly custom charge pipe with long enough Y to put MAF right at each TB. Will see how it goes.

TopgunZ · 12-11-2016, 11:43 AM

You should add to your list an intake temp sensor located in the plenum after the cooler.

ChaseZ · 12-11-2016, 11:54 AM

Thanks, I knew I was missing something but couldn't put my finger on what it was. AIT had crossed my mind before but ended up forgetting all about it again. Definitely want to know those temps!

TopgunZ · 12-11-2016, 10:41 PM

I have a brand new dual readout gauge. I think I have a 2 water temp sensor and an air sensor that I bought for it too.Was going to put one air in the manifold, one of the water sensors right before the intercooler and one right after it too see how well the heat exchanger was doing at cooling the water. This would be awesome and very easy to do with the stillen h.e. then swap to the treadstone and see what's going on. I think I bought some in line hose temp sensor bungs/fittings that would make installing them take about 5 minutes. Will sell cheap.

12-11-2016, 11:43 AM	#48 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	You should add to your list an intake temp sensor located in the plenum after the cooler. ChaseZ likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-11-2016, 10:41 PM	#50 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I have a brand new dual readout gauge. I think I have a 2 water temp sensor and an air sensor that I bought for it too.Was going to put one air in the manifold, one of the water sensors right before the intercooler and one right after it too see how well the heat exchanger was doing at cooling the water. This would be awesome and very easy to do with the stillen h.e. then swap to the treadstone and see what's going on. I think I bought some in line hose temp sensor bungs/fittings that would make installing them take about 5 minutes. Will sell cheap. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parts List	Spstone	Nismo 370Z	6	09-03-2015 03:45 AM
Parts List input and help appreciated	Spstone	Engine & Drivetrain	7	09-02-2015 09:49 PM
FI High Flow Cat parts list if you know?	abakja1	Intake/Exhaust	0	01-18-2010 01:27 AM
370Z Parts List	The Weapon	The370Z.com Feedback, Suggestions & Questions	2	10-06-2009 02:14 AM
List of Chrome Parts	earwicker7	Nissan 370Z General Discussions	15	06-15-2009 01:13 PM

12-11-2016, 11:00 AM	#47 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94683	Updated the OP parts list. Made the call to run a substantially upgraded A/W setup. Should still see some good gains and is more economical to start out with. Even beyond that still lots to do in the car with the wrap and decalling for it (company sponsored for events) and all these things add up quick so saving a grand or so over the A/A conversion helps a lot right now. Not to mention still need set of GramLites and tires too, along with a brake upgrade (trying to score a set off a wrecked Nismo). Here is the updated SC list so far: Amended list: Stillen SC, impeller upgrade and 9psi pulley FrozenBoost 101 Intercooler Bosch 850cc injectors K&N filter, right on the blower Greddy FV BOV Relocate MAF to charge pipe Speed density tuning Walbro 485 pump CJM hat and 10mm return kit GTR Plugs AMS Alpha GTR 4 bar MAP sensor OS Giken 1.5 Whiteline Diff bushing SouthBend Stage 3 Street clutch and flywheel (quiet one) CSC Elminator AEM Failsafe Boost/AFR Gauge Upgrade oil cooler to 34 row (will try it out first) Ecutek reflash Possibly custom charge pipe with long enough Y to put MAF right at each TB. Will see how it goes.

12-11-2016, 11:54 AM	#49 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94683	Thanks, I knew I was missing something but couldn't put my finger on what it was. AIT had crossed my mind before but ended up forgetting all about it again. Definitely want to know those temps!