Stillen SC P0101 Problem.
 

Car: 2016 370z nismo 400 miles on it.

The problem I am having is the code pops up (P0101) when I put the car in drive every time and goes into limp mode.

Its on a custom tune not Stillens.
Things I did trying to fix the problem:

Cleaned both maf sensors. = Did not help

Changed the maf from Bank a to b and b to a code was still (P0101) = doesn't look like a maf sensor problem.

No vacuum leaks.

Changed wire harness from bank a to bank b and now (P010B) so code move to bank b after wire harness from bank a to bank b. Called stillen to get new wires seems like a 100% sure shot that was the problem. = 3 new wire harness and problem it still there.

The maf is going out of range on the low side for sure we uped the high value to 12.99 and code still pops.

Any suggestions would be very great and helpful thank you.

You should talk to Seb at Specialty Z. He did my tune and the car runs great!

Was you having the same problem?

PM sent.

No, but everyone here that has used Seb has been VERY happy with his work. Great guy and he goes out of his way to help. Money well spent.

I second this motion. Sebastian has taken great care of my needs going on four years now!

Sent from my SM-N910P using Tapatalk

Yes I took his advice that he gave in a pm and worked out great will get dyno time today and get the numbers :) thanks everyone and Seb.....

i have the exact same problem ... what was your problem ? air filters location ?

u there SEB ? :tiphat:

probably best to call him at the shop seeing he hasn't been on here in a few weeks

Yep, or e-mail him - sebastian@specialtyz.com.

He has always responded promptly whenever I've e-mailed him. His customer service is top notch.

What was the advice he gave you?