Nissan 370Z Forum  

Whats needed for TT Install?

There was probably some miscommunication, there is no reason the oil pan spacer would cause the oil pressure light to come on. (Unless there was a leak sealing the pickup

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree38Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 11-15-2016, 12:17 PM   #1 (permalink)
A True Z Fanatic
 
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974724
phunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond reputephunk has a reputation beyond repute
Default

There was probably some miscommunication, there is no reason the oil pan spacer would cause the oil pressure light to come on. (Unless there was a leak sealing the pickup tube spacer to the pump, rather unlikely but possible)

I suspect that the cause and effect might be reversed from your explanation... a dip in idle to the point that the engine almost stalls can cause the oil pressure light to activate. Since the oil pump is crankshaft driven, when the engine speed is too low it will not generate oil pressure.

Also, the post about a tech plugging in and measuring pressure.. they were not being honest with you. The 370z does not have an oil pressure sensor to check the pressure. It merely has an oil pressure switch, which only activates to turn on the oil pressure light when pressure is very low.
takjak2, Chuck33079, YzGyz and 1 others like this.
__________________
Charles @ CJ Motorsports : Website | Facebook | Instagram | YouTube
Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Last edited by phunk; 11-15-2016 at 12:22 PM.
phunk is offline   Reply With Quote
Old 11-16-2016, 03:32 PM   #2 (permalink)
Base Member
 
ZOperaMan's Avatar
 
Join Date: Dec 2009
Location: Houston, Texas
Posts: 82
Drives: 09 TT370z Yellow 6MT
Rep Power: 16
ZOperaMan is on a distinguished road
Default

Quote:
Originally Posted by phunk View Post
There was probably some miscommunication, there is no reason the oil pan spacer would cause the oil pressure light to come on. (Unless there was a leak sealing the pickup tube spacer to the pump, rather unlikely but possible)

I suspect that the cause and effect might be reversed from your explanation... a dip in idle to the point that the engine almost stalls can cause the oil pressure light to activate. Since the oil pump is crankshaft driven, when the engine speed is too low it will not generate oil pressure.

Also, the post about a tech plugging in and measuring pressure.. they were not being honest with you. The 370z does not have an oil pressure sensor to check the pressure. It merely has an oil pressure switch, which only activates to turn on the oil pressure light when pressure is very low.
There's another thread with a similar issue: Low Oil Pressure at Idle

Regarding the oil pressure measurement, I am trying to figure out what exactly was being communicated to me about the pressure reading. I don't know if there is an aftermarket pressure sensor installed, or if the software reads or estimates pressure some other way. I should know more on Saturday. They intend to connect a diagnostic oil pressure gauge directly to try and find out exactly what's happening, and I'll post an update.

--ZOM
ZOperaMan is offline   Reply With Quote
Old 11-18-2016, 06:07 AM   #3 (permalink)
Base Member
 
Join Date: Sep 2016
Location: Crownsville Maryland
Posts: 63
Drives: 2009 370z Brilliant
Rep Power: 9
alanforn is on a distinguished road
Default

"I suspect that the cause and effect might be reversed from your explanation... a dip in idle to the point that the engine almost stalls can cause the oil pressure light to activate. Since the oil pump is crankshaft driven, when the engine speed is too low it will not generate oil pressure."

That actually sounds like what may be occurring, makes sense in my situation ( just a flash of oil light with momentary dip in idle).
alanforn is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Carbon fiber amuse install help needed nomodsjk Exterior & Interior 114 04-19-2023 10:14 AM
OS Giken LSD - What's needed for install gomer_110 Engine & Drivetrain 9 05-18-2022 06:51 AM
What is needed other than the components for an install? AggieDev Audio & Video 8 05-31-2015 01:27 PM
HFC install ... what a b!tch, tips needed tonybui Mid-Atlantic Region 20 12-20-2011 06:56 PM
Springs and Spacers install needed Z_bro Brakes & Suspension 4 06-23-2011 09:33 PM


All times are GMT -5. The time now is 12:48 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2