TAKING ORDERS for winter 2017 turbo kits

jwick · 08-05-2017, 10:22 AM

Quote:

Originally Posted by solidus

Where the filter sits now might not be sorcery but it's damned close. I'm sure Sasha considered an alternate location but the difficulty precluded making it a production option, but did'nt the V1 version of the kit run intercooler piping through the passenger side? Hell I've daydreamed about oblong tubes connected to flat filters in the wheel well and even internally reinforced silicone tubes to snake through.

The V1 kit had the charge piping routed on the passenger side and it was a ************ to install. That piping was only 2.5" and it barely cleared. A single 2.5" pipe is not going to be enough air to feed the turbo.

Elmo370z · 08-05-2017, 03:09 PM

Can't wait until these units are up again. I want one

jax4557 · 08-05-2017, 10:11 PM

I am thinking about maybe an aluminum box to go around the turbski filter that shields upper manifold heated air and ground / dirty water air from getting into it. I guess it would be pulling sideways from where the stock fuel lines come up into the bay.

On a side note I have one other point to discuss. Does anyone else have issues with the driver side charge pipe hitting the little nub on the wishbone and also the nub on the steering rack pinion? I have rub marks like a B.

solidus · 08-06-2017, 03:21 PM

Quote:

Originally Posted by jax4557

I am thinking about maybe an aluminum box to go around the turbski filter that shields upper manifold heated air and ground / dirty water air from getting into it. I guess it would be pulling sideways from where the stock fuel lines come up into the bay.

On a side note I have one other point to discuss. Does anyone else have issues with the driver side charge pipe hitting the little nub on the wishbone and also the nub on the steering rack pinion? I have rub marks like a B.

I saw it rubbing after the taking it out for "The incident". I dinged that bastard with a ball peen hammer.

James10694 · 08-07-2017, 09:02 PM

Apparently they're have been 2 comp turbo failures with less than 10 miles on each. Don't know if I want this kit anymore....

Jinxx · 08-07-2017, 09:12 PM

The pipe should have had a round "dent " in that spot for the nub for clearance ....I added a rubber cover over the area as well to protect it from rubbing

Ni55anPat · 08-07-2017, 11:28 PM

Quote:

Originally Posted by James10694

Apparently they're have been 2 comp turbo failures with less than 10 miles on each. Don't know if I want this kit anymore....

Why are you bashing the kit? You know you can order the oil fed turbo with his kit right?

James10694 · 08-08-2017, 12:46 AM

Quote:

Originally Posted by Ni55anPat

Why are you bashing the kit? You know you can order the oil fed turbo with his kit right?

I'm not bashing the kit I'm bashing the comp turbo. After seeing 2 turbos fail in the first oil less batch would you put the comp turbo on your car? I already have the kit so I'm going to have to figure out a way to get a oil fed turbo.

09nismo498 · 08-08-2017, 10:42 AM

Quote:

Originally Posted by James10694

I'm not bashing the kit I'm bashing the comp turbo. After seeing 2 turbos fail in the first oil less batch would you put the comp turbo on your car? I already have the kit so I'm going to have to figure out a way to get a oil fed turbo.

Personally, I would just install it. Don't let 2 problems stop you at this point. Mine is one that failed, and leaked coolant into the exhaust (see my post in comp turbo failure thread). After I got it replaced, everything is good now. These turbos are fairly new, a few problems here and there are going to happen. If you are that worried, get the oil fed turbo, but I would just install the one you have personally.

James10694 · 08-08-2017, 08:55 PM

Quote:

Originally Posted by 09nismo498

Personally, I would just install it. Don't let 2 problems stop you at this point. Mine is one that failed, and leaked coolant into the exhaust (see my post in comp turbo failure thread). After I got it replaced, everything is good now. These turbos are fairly new, a few problems here and there are going to happen. If you are that worried, get the oil fed turbo, but I would just install the one you have personally.

Well that eases my nerves alittle. Thanks for chiming in.

Nismo_D · 08-10-2017, 02:59 PM

Has anyone heard from Sasha? I tried to see when will he be taking orders again. I've finally got the money and I'm tying to get it before i leave for this deployment. With that being said anyone have a rough estimate of how long it takes to get the whole kit shipped?

Hilla_killa · 08-10-2017, 08:14 PM

Quote:

Originally Posted by Nismo_D

Has anyone heard from Sasha? I tried to see when will he be taking orders again. I've finally got the money and I'm tying to get it before i leave for this deployment. With that being said anyone have a rough estimate of how long it takes to get the whole kit shipped?

Is his email on the link in op? Or pm him. I pmed hime recently and he got back to me quickly.

James10694 · 08-10-2017, 09:22 PM

I sent him a PM a few days ago. Nothing yet.

sleeper69 · 08-11-2017, 03:39 PM

Quote:

Originally Posted by James10694

I sent him a PM a few days ago. Nothing yet.

Same here. Really excited to get on the next purchase list. Hope to hear from him soon!

Boosted Performance · 08-12-2017, 01:38 AM

Gentlemen, I will get back to all that sent PM's in the next few days.

As for the COMP turbos, the come with a full 1 year warranty, and turn around on any warranty work has been nothing but superbly fast, with two-day air reruns to customers. I have honestly never dealt with a manufacturer that has better service than COMP. There are about 30 of them out there on Z cars, without a single issue.

As for a heat shield, I'd like to get my hands on a passenger side OEM exhaust manifold so I can see what can be done ... I have some ideas floating around.

08-07-2017, 09:02 PM	#290 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 917 Drives: 2010 370z Nismo Rep Power: 13	Apparently they're have been 2 comp turbo failures with less than 10 miles on each. Don't know if I want this kit anymore.... __________________ Boosted Performance Single Turbo 618whp/489 tq

08-10-2017, 09:22 PM	#298 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 917 Drives: 2010 370z Nismo Rep Power: 13	I sent him a PM a few days ago. Nothing yet. __________________ Boosted Performance Single Turbo 618whp/489 tq

08-12-2017, 01:38 AM	#300 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Gentlemen, I will get back to all that sent PM's in the next few days. As for the COMP turbos, the come with a full 1 year warranty, and turn around on any warranty work has been nothing but superbly fast, with two-day air reruns to customers. I have honestly never dealt with a manufacturer that has better service than COMP. There are about 30 of them out there on Z cars, without a single issue. As for a heat shield, I'd like to get my hands on a passenger side OEM exhaust manifold so I can see what can be done ... I have some ideas floating around. James10694 and solidus like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GReddy 20G 'Tuner' Twin Turbo Kit \| 450+rwhp @ .4Bar \| Now Taking Orders \| FREE S&H!	AJ@ECSMotorsports	Drivetrain/Engine	57	04-09-2013 11:52 AM
Jp vizage 370z polyurathane lip kit. Taking pre orders	LOU@AMPLIFIED	Body Interior/Exterior	22	09-09-2011 02:41 AM
Taking orders for LED/Angel Eyes Headlights.	Tee's Z	Exterior & Interior	17	08-01-2010 11:46 AM
Forged Distributing Taking Orders	Forged DST	Wheels & Tires	51	10-23-2009 09:37 PM
Dealers Not taking anymore custom orders	YamahaR6	Canada	18	05-20-2009 10:31 PM

08-05-2017, 03:09 PM	#287 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Can't wait until these units are up again. I want one

08-05-2017, 10:11 PM	#288 (permalink)
jax4557 Base Member Join Date: Nov 2014 Location: Jacksonville Posts: 102 Drives: 2014 370z Sport M6 Rep Power: 11	I am thinking about maybe an aluminum box to go around the turbski filter that shields upper manifold heated air and ground / dirty water air from getting into it. I guess it would be pulling sideways from where the stock fuel lines come up into the bay. On a side note I have one other point to discuss. Does anyone else have issues with the driver side charge pipe hitting the little nub on the wishbone and also the nub on the steering rack pinion? I have rub marks like a B.

08-07-2017, 09:12 PM	#291 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	The pipe should have had a round "dent " in that spot for the nub for clearance ....I added a rubber cover over the area as well to protect it from rubbing

08-10-2017, 02:59 PM	#296 (permalink)
Nismo_D Base Member Join Date: Sep 2015 Location: Alabama Posts: 13 Drives: 11 370Z Nismo BS M6 Rep Power: 10	Has anyone heard from Sasha? I tried to see when will he be taking orders again. I've finally got the money and I'm tying to get it before i leave for this deployment. With that being said anyone have a rough estimate of how long it takes to get the whole kit shipped?