Engine hoist lift points

Jshvr · 08-04-2016, 08:54 PM

Has anyone used an engine hoist on our motor? I'll be dropping my motor soon and can't seem to find hoist lifting point info anywhere.

DEpointfive0 · 08-04-2016, 08:58 PM

I don't think anyone pulls it from the top, that's maybe why?

Jshvr · 08-04-2016, 09:13 PM

Well I'm trying to bring it down about half way just to get the turbo kit on. I'll have it on 24inch jack stands.

bullitt5897 · 08-05-2016, 12:58 PM

I just got done doing this so let me chime in here...

You will need to hook up to a transmission bolt in the back and also around the tiing cover bridge between the two banks.

Warning: remove anything around the back that may get pinched (Electrical and fuel related)

Use a chain on the front and back.

Jshvr · 08-05-2016, 06:43 PM

Ok have the intake off. Not sure which place you are talking about on the front. I'll post a picture

Jshvr · 08-05-2016, 06:47 PM

I

Jshvr · 08-05-2016, 06:48 PM

H

zguynate · 08-06-2016, 01:00 PM

He may be referring to the hole right there where the coolant tube is going through.

Jshvr · 08-11-2016, 02:48 PM

She's down. It really wasn't that bad

denchan350gt · 08-16-2016, 04:59 PM

So where did you mount it?

Jshvr · 08-17-2016, 05:22 PM

Ended up using a strap around the tranny. Lifted the front with two bolts on the lower plenum. I'll post pictures

Jshvr · 08-17-2016, 05:25 PM

I made a bracket to bridge the load on the two bolts

Jshvr · 08-17-2016, 05:28 PM

Lifting strap around the trans. Strap was rated for 6000+ pounds.

Jshvr · 08-17-2016, 05:35 PM

I got everything except the L bracket, and bolts from harbor freight. The chain was actually a trailer safety chain. Bolts were 10.7 rated stainless, with multiple washers on each bolt. I had to get bolts long enough to be able to get a chain under the L bracket. Last but not least I put a U-bolt in the middle of the L bracket to keep the chain centered.

Speed808 · 11-10-2017, 02:47 AM

I'm looking to just support the engine to remove my subframe and swap in a new one. Mines bent. Having a hard time understanding an easy way to do that �� Have the harbor freight engine support brace coming. Never did this before so really trying not to break anything. Found nothing in the service manual so far.

08-04-2016, 08:54 PM	#1 (permalink)
Jshvr Base Member Join Date: May 2013 Location: Savannah GA Posts: 173 Drives: 13 Nissan 370z GM M6 Rep Power: 29	Engine hoist lift points Has anyone used an engine hoist on our motor? I'll be dropping my motor soon and can't seem to find hoist lifting point info anywhere.

08-04-2016, 08:58 PM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	I don't think anyone pulls it from the top, that's maybe why? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

08-05-2016, 12:58 PM	#4 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I just got done doing this so let me chime in here... You will need to hook up to a transmission bolt in the back and also around the tiing cover bridge between the two banks. Warning: remove anything around the back that may get pinched (Electrical and fuel related) Use a chain on the front and back. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

08-06-2016, 01:00 PM	#8 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 73	He may be referring to the hole right there where the coolant tube is going through. __________________ 2009 370z touring w/sports package

08-16-2016, 04:59 PM	#10 (permalink)
denchan350gt Base Member Join Date: Apr 2016 Location: Goldsboro NC Posts: 27 Drives: 10 G37 7AT Rep Power: 9	So where did you mount it? __________________ 04 5AT G35 13.1@101, 04 TT G35x 11.52@120, 2010 7AT G37 12.7@109

08-04-2016, 09:13 PM	#3 (permalink)
Jshvr Base Member Join Date: May 2013 Location: Savannah GA Posts: 173 Drives: 13 Nissan 370z GM M6 Rep Power: 29	Well I'm trying to bring it down about half way just to get the turbo kit on. I'll have it on 24inch jack stands.

08-05-2016, 06:43 PM	#5 (permalink)
Jshvr Base Member Join Date: May 2013 Location: Savannah GA Posts: 173 Drives: 13 Nissan 370z GM M6 Rep Power: 29	Ok have the intake off. Not sure which place you are talking about on the front. I'll post a picture

08-17-2016, 05:22 PM	#11 (permalink)
Jshvr Base Member Join Date: May 2013 Location: Savannah GA Posts: 173 Drives: 13 Nissan 370z GM M6 Rep Power: 29	Ended up using a strap around the tranny. Lifted the front with two bolts on the lower plenum. I'll post pictures

11-10-2017, 02:47 AM	#15 (permalink)
Speed808 Base Member Join Date: Aug 2017 Location: Hawaii Posts: 23 Drives: 2012 370z nismo Rep Power: 8	I'm looking to just support the engine to remove my subframe and swap in a new one. Mines bent. Having a hard time understanding an easy way to do that �� Have the harbor freight engine support brace coming. Never did this before so really trying not to break anything. Found nothing in the service manual so far.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Car lift	Wilson2608	Parts for sale (Private Classifieds)	4	11-23-2015 09:01 AM
Lift/Jacking Points	exedy699	Nismo 370Z	9	12-16-2014 08:48 PM
[WTB] Air lift v2 set up	nomodsjk	Parts for sale (Private Classifieds)	7	08-05-2014 12:40 AM
Too low to lift car	laricb	Brakes & Suspension	18	01-07-2012 04:12 PM