Injector Limitations

SlyZGuy · 08-01-2016, 07:47 PM

What are your opinions on the limitations of the 600cc injectors that come on the stillen kit? Do you think they should be swapped out at a specific WHP or dependent on certain upgrades? Currently running 9lb pulley, and installing a2a kit and not planning on any future engine mods. My shop is suggesting the si Trim impeller and injector upgrade and I anticipate around 470-480whp with the si or 460whp without swapping and keeping stock impeller.

RJ MFG · 08-01-2016, 09:53 PM

Depending on fuel the 600cc should be fine. This is also tuner preference. As long as your under 90% duty cycle you will be fine.

Jshvr · 08-01-2016, 10:38 PM

I ran 600's at 12psi on my turbo kit with 520whp. You should be fine

TopgunZ · 08-02-2016, 06:42 AM

Quote:

Originally Posted by Jshvr

I ran 600's at 12psi on my turbo kit with 520whp. You should be fine

Did you have a rfs for boost pressure compensation?

SlyZGuy · 08-03-2016, 10:34 PM

just going to go with 850cc's to be safe.

08-01-2016, 07:47 PM	#1 (permalink)
SlyZGuy Base Member Join Date: Jan 2016 Location: Maryland Posts: 220 Drives: 2014 370z S/C M6 Rep Power: 10	Injector Limitations What are your opinions on the limitations of the 600cc injectors that come on the stillen kit? Do you think they should be swapped out at a specific WHP or dependent on certain upgrades? Currently running 9lb pulley, and installing a2a kit and not planning on any future engine mods. My shop is suggesting the si Trim impeller and injector upgrade and I anticipate around 470-480whp with the si or 460whp without swapping and keeping stock impeller. __________________ Stillen S/C \| '15 Nismo Conversion \| Aodhan \| Eibach \| Tokico \| SPC \| Z1 \| Evo-R \| Aerojacket \| HKS \| Berk \| CFE \| APR \| Amuse \| Z1 \| A2A IC \| AAM \| Buddy Club \|

08-01-2016, 09:53 PM	#2 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 284	Depending on fuel the 600cc should be fine. This is also tuner preference. As long as your under 90% duty cycle you will be fine. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

08-03-2016, 10:34 PM	#5 (permalink)
SlyZGuy Base Member Join Date: Jan 2016 Location: Maryland Posts: 220 Drives: 2014 370z S/C M6 Rep Power: 10	just going to go with 850cc's to be safe. TopgunZ and Jshvr like this. __________________ Stillen S/C \| '15 Nismo Conversion \| Aodhan \| Eibach \| Tokico \| SPC \| Z1 \| Evo-R \| Aerojacket \| HKS \| Berk \| CFE \| APR \| Amuse \| Z1 \| A2A IC \| AAM \| Buddy Club \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fuel injector	Z eliminator	Tuning	0	07-28-2016 08:34 AM
*******Injector Dynamic injector blowout SALE!!	Moddiction	Drivetrain/Engine	16	12-16-2014 09:32 AM
injector life	Jimbo370	Engine & Drivetrain	7	07-25-2014 10:29 PM
Torque Converter Limitations	LEGA-Z	Engine & Drivetrain	2	09-21-2012 12:13 PM
VQ37HR block limitations?	Orphan	Forced Induction	59	02-25-2010 09:37 AM

08-01-2016, 10:38 PM	#3 (permalink)
Jshvr Base Member Join Date: May 2013 Location: Savannah GA Posts: 173 Drives: 13 Nissan 370z GM M6 Rep Power: 29	I ran 600's at 12psi on my turbo kit with 520whp. You should be fine