700 rwhp Fast Intentions Nismo Build (93 pump & meth)
 

Heys Guys,
I wanted to share a build that we are doing on our 2014 nismo 370Z which will be completed just in time for Zdayz this year. We purchased the vehicle back in october 2015 completely stock with 10,000 miles on it. Not long after the vehicle was purchased we placed an order for the Fast Intentions Non-resonated test pipes and 2.5" Catback exhaust system. As soon as the exhaust products came in we installed them along with a set of K&N drop in filters and a custom ecutek tune.

http://i1112.photobucket.com/albums/...pso7gxdrzv.jpg
http://i1112.photobucket.com/albums/...psmyxhhtw4.jpg

The power was great, but it got old real fast and we were looking for more power. After talking to tony at Fast Intentions we agreed that we were going to take on the stock block record for the 370Z in 1/4 mile times and horsepower but with a twist, in that we were going to accomplish this feature on 93 pump gas and the aquamist water methanol kit. ;)

Here is the list of items that we are going to include in this build: :happydance:
-Fast Intentions Stage Two Twin Turbo Kit (TiAL/XONA HTZ-2868 Turbocharger.)
- Twin Turbo Full 3" Down Pipes: Internal wastegate Recirculation tubes.
- 3" TT Cat Back Exhaust: Non Resonated / Polished Stainless Mufflers / 4.5" Tips.
- Fast Intentions FAST-500: Return Fuel System
- SZ Clutch/Flywheel Combo: Z33 (07-08), Z34 & V36. MAX
5-PUCK (Up to 725 RWH)
- Aquamist HFS3 Kit
- Turbosmart Eboost 2 Boost Controller
- Innovate Wideband Gauge
- Mickey Thompson ET Street Radial SS 305/40/R18
- Gram Lights 57FXX 18 x 10.5 +20
- Seibon GTR Carbon Fiber Hood
- Mishimoto Radiator & Thermostat

Parts have started to arrive and since we know that we have to have the vehicle completed by zdayz, we know we have a lot of work to do and we will continue to update this thread during the build...In the meantime, enjoy!

http://i1112.photobucket.com/albums/...pssculfyr5.jpg

http://i1112.photobucket.com/albums/...pse1hujbx7.jpg

http://i1112.photobucket.com/albums/...psv9nw6q44.jpg

http://i1112.photobucket.com/albums/...ps3t0nz6q8.jpg

http://i1112.photobucket.com/albums/...pspyfysivx.jpg

http://i1112.photobucket.com/albums/...psrt87vrtw.jpg

http://i1112.photobucket.com/albums/...psbcgknwc8.jpg

http://i1112.photobucket.com/albums/...pshkkddhbg.jpg

http://i1112.photobucket.com/albums/...pslxzzpoot.jpg

http://i1112.photobucket.com/albums/...pszqyxa4c4.jpg

http://i1112.photobucket.com/albums/...ps2jwobmnd.jpg

http://i1112.photobucket.com/albums/...ps4494jnt5.jpg

http://i1112.photobucket.com/albums/...psa08mhnoa.jpg

http://i1112.photobucket.com/albums/...psnkryj0a8.jpg

http://i1112.photobucket.com/albums/...ps0wcmunuh.jpg

http://i1112.photobucket.com/albums/...psbo0ixoyn.jpg

*The quality of the Fast Intentions Twin Turbo Kit & fitment are by far one of the best fitting kits that we have installed* :tup:

Sub'd! :D

Looks like a helicopter engine into a car.

I've often wondered why no one uses methanol injection. The Subaru guys love the stuff. Subbed for results.

I'm in full drool mode. So you think you guys will break 768whp on pump and meth? shooting for 800whp? I sure hope so. good luck with the build.

That's cool going for the record on a stock block but better go ahead and start building a built motor.

Update:
Engine has been put back in the vehicle, Radiator, Oil Cooler, Fast 500 Fuel Return System have been installed, we have started on the aquamist kit, hopefully planning on hitting the dyno this saturday!

http://i1112.photobucket.com/albums/...psmirma8z6.jpg

http://i1112.photobucket.com/albums/...psxsi9acwj.jpg

http://i1112.photobucket.com/albums/...psaqbszvtr.jpg

http://i1112.photobucket.com/albums/...syt0qfuc4.jpeg

http://i1112.photobucket.com/albums/...pswaoobmow.jpg

http://i1112.photobucket.com/albums/...s1u3h8eb5.jpeg

http://i1112.photobucket.com/albums/...snblgyilx.jpeg

http://i1112.photobucket.com/albums/...psbxrzvh8m.jpg

http://i1112.photobucket.com/albums/...pse0uwajvd.jpg

We have incorporated two 1.20 mm nozzle jets prior to the throttle bodies on each side as you can see below:

http://i1112.photobucket.com/albums/...pswmzcpod6.jpg

http://i1112.photobucket.com/albums/...psvzmjs1ls.jpg

Can't wait for dyno numbers.

Wow. Great looking build.. thanks for sharing

:tup:

looks good man!

Awesomeness!!! I wonder how much power this will make with E85 and meth??

This one is just for 93 and meth, right? I was under the impression E85 was cooler and higher octane than meth, so it would actually hurt if used in conjunction with E85.

Can't use meth with e85 and e85 would yield greater tuning abilities than 93+meth..

in