700 rwhp Fast Intentions Nismo Build (93 pump & meth)

Nik@SOHO

***UPDATE***
After breaking the axle, we had around two and half months to prepare for Zdayz... and we decided that we were not going to rebuild the motor and focus primarily on removing weight and adding aero to the nismo.

Since we were going to be using this car primarily for 1/4 mile and 1/2 mile events, we decided that an NHRA certified roll cage, parachute, smaller rear wheel coupled with a larger tire and less weight were going to be the main things to focus on.









Next up, was removing the rear nismo spoiler and incoporating a drag spoiler along with the stroud chute and mount.





The akebono rear calipers had to be removed and base nissan 350Z brake calipers were used to allow the 15 x 11 Belak Industries wheel to fit.



The rear bumper was modified to help reduce any drag that could potentially occur and the rear section of the fast intentions exhaust was removed and turn downs were made!




We were able to purchase another stock axle to get the nismo going as the vendor that we are talking to for aftermarket axles was unable to have them completed by Zdayz...but stay tuned as we are working on providing aftermarket axles at an affordable price





Zdayz was the first time that anybody had seen the new setup and we received a number of compliments about it, but our biggest test would be at the half mile event on sunday. At first we were concerned as rain was in the forecast but that was not the case when we arrived as it was cloudy and cooler.

We left Zdayz late saturday afternoon to come back and prepare for the Wannagofast event which included swapping the slicks out for ET street radials...


First pass off the trailer on our high boost setting (13 psi) we hit 155.25 mph, which was a good sign as we had hit that same mph with our GTR kill boost setting (15 psi) in Georgia!



The car consistently ran a 155 pass after pass on our high boost setting, we made a few changes to tire pressures and looked over the tune and went out on our GTR kill boost setting and clocked in a 156.35 mph! Resetting the record of the 155 that we had set back in 2016!



*We also got to test the chute and meet Gidi*







Next up on the agenda is we wait for the prototype axles to be made and a few other drivetrain goodies we are testing and we are going to go back out on the stock motor and attempt to lower on times significantly! Stay tuned!

Rusty

Seen the Z at ZDayZ, and it looked beastly.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Kris9884

That's a great update! Just goes to show with the right supporting mods and a great tune, the VQ can be a beast. So I guess this means 600hp is the new safe* mark

__________________
My slow build thread on MyG37 - http://www.myg37.com/forums/build-th...upe-build.html

tonythetiger

nice build, how much does the car weigh?

__________________

KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

Nik@SOHO

**Update**
We had been working with another vendor for the past three months trying to get axles made that were going to be less in price then the DSS and offer different levels, unfortunately that vendor was not able to meet our deadlines...

Since Dynosty now is building a Drag nismo as well, we had Logan contact his representative at Driveshaft shop to get us a set of the level five axles within a week and to also respark the interest that an 800 hp axle package may be beneficial to the Z community.

Street car takeover is happening this weekend at zMAX, which is right down the street from us so we had to capitalize on the opportunity. Here are a few photos of the axles and stay tuned for updates from this weekend!

Nik@SOHO

**Update**
We had been working with another vendor for the past three months trying to get axles made that were going to be less in price then the DSS and offer different levels, unfortunately that vendor was not able to meet our deadlines...

Since Dynosty now is building a Drag nismo as well, we had Logan contact his representative at Driveshaft shop to get us a set of the level five axles within a week and to also respark the interest that an 800 hp axle package may be beneficial to the Z community.

Street car takeover is happening this weekend at zMAX, which is right down the street from us so we had to capitalize on the opportunity. Here are a few photos of the axles and stay tuned for updates from this weekend!

PongSanity

800hp axles for everyone! I hope they go through with it. 800hp is realistically the cap of like 80%Of the community. Good stuff man. Good luck this weekend.

Sent from my SM-G950U using Tapatalk

Kris9884

Could I ask what your rear brake setup is to fit under the drag wheels?

__________________
My slow build thread on MyG37 - http://www.myg37.com/forums/build-th...upe-build.html

Elmo370z

What Was the limit, killing everyone?!?!?!?!?

Nik@SOHO

Base 350Z Rear Brakes

Nik@SOHO

We were at 17 psi for almost a year which equated to around 725 rwhp and 610 ft-lbs of torque
I will post pics up shortly of the aftermath

Elmo370z

wow, held up pretty good

Spooler

So the motor finally let go or just the axles?

Elmo370z

Motor valves

Nik@SOHO