700 rwhp Fast Intentions Nismo Build (93 pump & meth)

Kris9884 · 05-26-2017, 02:03 PM

That's a great update! Just goes to show with the right supporting mods and a great tune, the VQ can be a beast. So I guess this means 600hp is the new safe* mark

tonythetiger · 06-04-2017, 09:16 AM

nice build, how much does the car weigh?

Nik@SOHO · 06-21-2017, 08:02 AM

**Update**
We had been working with another vendor for the past three months trying to get axles made that were going to be less in price then the DSS and offer different levels, unfortunately that vendor was not able to meet our deadlines...

Since Dynosty now is building a Drag nismo as well, we had Logan contact his representative at Driveshaft shop to get us a set of the level five axles within a week and to also respark the interest that an 800 hp axle package may be beneficial to the Z community.

Street car takeover is happening this weekend at zMAX, which is right down the street from us so we had to capitalize on the opportunity. Here are a few photos of the axles and stay tuned for updates from this weekend!

Nik@SOHO · 06-21-2017, 08:04 AM

**Update**
We had been working with another vendor for the past three months trying to get axles made that were going to be less in price then the DSS and offer different levels, unfortunately that vendor was not able to meet our deadlines...

Since Dynosty now is building a Drag nismo as well, we had Logan contact his representative at Driveshaft shop to get us a set of the level five axles within a week and to also respark the interest that an 800 hp axle package may be beneficial to the Z community.

Street car takeover is happening this weekend at zMAX, which is right down the street from us so we had to capitalize on the opportunity. Here are a few photos of the axles and stay tuned for updates from this weekend!

PongSanity · 06-21-2017, 08:11 AM

800hp axles for everyone! I hope they go through with it. 800hp is realistically the cap of like 80%Of the community. Good stuff man. Good luck this weekend.

Sent from my SM-G950U using Tapatalk

Kris9884 · 06-24-2017, 03:50 PM

Could I ask what your rear brake setup is to fit under the drag wheels?

Nik@SOHO · 06-27-2017, 01:24 PM

Quote:

Originally Posted by Kris9884

Could I ask what your rear brake setup is to fit under the drag wheels?

Base 350Z Rear Brakes

Elmo370z · 06-24-2017, 11:03 PM

What Was the limit, killing everyone?!?!?!?!?

Nik@SOHO · 06-27-2017, 01:25 PM

Quote:

Originally Posted by Elmo370z

What Was the limit, killing everyone?!?!?!?!?

We were at 17 psi for almost a year which equated to around 725 rwhp and 610 ft-lbs of torque

I will post pics up shortly of the aftermath

Spooler · 06-27-2017, 07:06 PM

Quote:

Originally Posted by Nik@SOHO

We were at 17 psi for almost a year which equated to around 725 rwhp and 610 ft-lbs of torque

I will post pics up shortly of the aftermath

So the motor finally let go or just the axles?

Elmo370z · 06-27-2017, 03:27 PM

wow, held up pretty good

Elmo370z · 06-27-2017, 07:54 PM

Motor valves

Nik@SOHO · 06-28-2017, 08:34 AM

Chuck33079 · 06-28-2017, 08:36 AM

Quote:

Originally Posted by Nik@SOHO

Yup, there's your problem right there.

You blew that up pretty good. I'm really surprised how long it lasted at that power level.

TBatt · 06-28-2017, 09:36 AM

It's only a flesh wound!

05-26-2017, 02:03 PM	#1 (permalink)
Kris9884 Base Member Join Date: Mar 2016 Location: MO Posts: 72 Drives: 2008 G37s Rep Power: 10	That's a great update! Just goes to show with the right supporting mods and a great tune, the VQ can be a beast. So I guess this means 600hp is the new safe* mark Nik@SOHO likes this. __________________ My slow build thread on MyG37 - http://www.myg37.com/forums/build-th...upe-build.html

06-04-2017, 09:16 AM	#2 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 193	nice build, how much does the car weigh? __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

06-21-2017, 08:02 AM	#3 (permalink)
Nik@SOHO Base Member Join Date: Feb 2013 Location: Charlotte Posts: 234 Drives: 14 Nismo 370Z Rep Power: 10079	Update We had been working with another vendor for the past three months trying to get axles made that were going to be less in price then the DSS and offer different levels, unfortunately that vendor was not able to meet our deadlines... Since Dynosty now is building a Drag nismo as well, we had Logan contact his representative at Driveshaft shop to get us a set of the level five axles within a week and to also respark the interest that an 800 hp axle package may be beneficial to the Z community. Street car takeover is happening this weekend at zMAX, which is right down the street from us so we had to capitalize on the opportunity. Here are a few photos of the axles and stay tuned for updates from this weekend! JARblue, Rusty and Hotrodz like this.

06-21-2017, 08:04 AM	#4 (permalink)
Nik@SOHO Base Member Join Date: Feb 2013 Location: Charlotte Posts: 234 Drives: 14 Nismo 370Z Rep Power: 10079	Update We had been working with another vendor for the past three months trying to get axles made that were going to be less in price then the DSS and offer different levels, unfortunately that vendor was not able to meet our deadlines... Since Dynosty now is building a Drag nismo as well, we had Logan contact his representative at Driveshaft shop to get us a set of the level five axles within a week and to also respark the interest that an 800 hp axle package may be beneficial to the Z community. Street car takeover is happening this weekend at zMAX, which is right down the street from us so we had to capitalize on the opportunity. Here are a few photos of the axles and stay tuned for updates from this weekend! BOLIO 671, blueranger and VQZ34nismo like this.

06-21-2017, 08:11 AM	#5 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	800hp axles for everyone! I hope they go through with it. 800hp is realistically the cap of like 80%Of the community. Good stuff man. Good luck this weekend. Sent from my SM-G950U using Tapatalk Nik@SOHO and Jayhovah like this.

06-24-2017, 03:50 PM	#6 (permalink)
Kris9884 Base Member Join Date: Mar 2016 Location: MO Posts: 72 Drives: 2008 G37s Rep Power: 10	Could I ask what your rear brake setup is to fit under the drag wheels? __________________ My slow build thread on MyG37 - http://www.myg37.com/forums/build-th...upe-build.html

06-24-2017, 11:03 PM	#8 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	What Was the limit, killing everyone?!?!?!?!?

06-27-2017, 03:27 PM	#11 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	wow, held up pretty good

06-27-2017, 07:54 PM	#12 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Motor valves

06-28-2017, 08:34 AM	#13 (permalink)
Nik@SOHO Base Member Join Date: Feb 2013 Location: Charlotte Posts: 234 Drives: 14 Nismo 370Z Rep Power: 10079

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CarbonZ 1000+rwhp Engine Build	Carbon_z	Member's 370Z Gallery	262	03-11-2020 09:55 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
600+rwhp AAM Twin Turbo Build	Nik@SOHO	Forced Induction	16	01-25-2016 10:41 PM
The build! Fast Intentions Twin Turbo 370z Nismo	1Z2NV	Forced Induction	0	10-02-2015 09:51 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM