New FI club member

TBatt

I found the Gates Racing belt I was looking for.

Gates Racing K081088 8-Rib Micro-V and V-Ribbed Belts | Autoplicity

This is an 8 rib belt that will need to be modified by cutting off one rib for the new serpentine drive.

It's blue so it will look much nicer than the green belt that is currently on my car.

I dropped off the rear axle at the local Nissan dealer so they could replace the torn CV boot and repack with grease. They said it would be done this afternoon so I might have the car back together this evening.

The other thing I want to do is to find a source (other than the dealer) for some replacement screws for the front pan. Some of those screws are getting quite worn. These are the screws that have the integrated washer, 10mm head with a cross drive (phillips head), 6mm x 1mm thread about 15-20mm long. If I find a source I'll post the link.

I've ordered some of these to see if they are what I'm looking for. https://www.belmetric.com/body-bolts...thm94fev9lv990

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!