Stage 2 gtm supercharger pulley specs

Jinxx · 03-22-2016, 03:42 PM

Has anyone used kraftwerk pulleys with these kits ...they have a 85mm 7rib 6bolt style pattern and from what I find researching it should be able to bolt right up ...only difference is the pulley size is 85 vs 84 .......but I can seem to find gtm pulley specs...this is the kraftwerks pulley

.....159-99-8507 - Pulleys - Kraftwerks - Skunk2 Store

Any info would be helpful

Liquid_G · 03-25-2016, 11:40 AM

Quote:

Originally Posted by Jinxx

Has anyone used kraftwerk pulleys with these kits ...they have a 85mm 7rib 6bolt style pattern and from what I find researching it should be able to bolt right up ...only difference is the pulley size is 85 vs 84 .......but I can seem to find gtm pulley specs...this is the kraftwerks pulley

.....159-99-8507 - Pulleys - Kraftwerks - Skunk2 Store

Any info would be helpful

Damn not a bad find, didn't even think about looking to them. They use similar rotrex compressors in their FRS kits. I know mine has 6 holes like that but not sure on the rib count offhand.
For sizes its all over the place.. I have an early stage 1 kit but somehow ended up with an 88mm pulley. I think most stage 1 people got a 92mm?

Jinxx · 03-27-2016, 02:37 AM

I have the stage two kit and it came with a 92mm pulley 8lbs and I did confirm the pulley 6bolt patterns are the same and that it is the 7 rib ...... And doing the math on the pulleys a 85 mm puts me at just over 90k at 7k rpm .... Which i think fits me best ..I don't like redlining the car and thus will get me boost earlier in the rpm range ... And if I'm doing the math right I should be around 10-11 lbs at 7k

theDreamer · 03-28-2016, 12:57 PM

Awhile back I was emailing Kraftwerks directly about pulley and SC units. These are some of the notes from the exchange:

Quote:

We actually Provided GTM with rotrex Units and Pulleys in the Past. This Pulley actually looks like one of ours that has been polished or chromed.

It looks like one of our pulleys, but I cant be sure.

Jinxx · 03-28-2016, 05:14 PM

Yea they only difference was the measurements .. Kraftwerks use 5mm increments ...80-85-90-95 where as GTM was 84..88.. 92... 96

AntiVenom · 03-30-2016, 03:44 PM

hot damn! thanks for the info.

Jinxx · 03-30-2016, 05:48 PM

Lol ... That's how I felt when I found it ... Got my 85mm on the way now will be here 4-4-16

Jinxx · 04-04-2016, 04:03 PM

Just a update ...85mm pulley is installed ...went in with no issues I will be testing and logging and planning for a dyno run soon

kentmo280z · 12-12-2016, 08:11 PM

Looking for the torque specs on the GTM S.C. pulley bolts. 6 6mm bolts.
There are no specs on the rotrex site for these bolts.

theDreamer · 12-13-2016, 10:18 AM

This should be it, from the Rotrex Technical Datasheet for the C38:

kentmo280z · 12-13-2016, 04:39 PM

I saw that spec earlier. That's not the same bolt as the small (6) 6mm bolts. I just snugged them in to probably 15 lbs.

kentmo280z · 12-13-2016, 04:47 PM

BTW Matt,
The 1.5 install is coming along. I have the S.C. reinstalled with the new intake & filter. I ended up unbolting the header which made installing the motor mount a snap. Using a air ratchet was a life saver for the header bolts!!
Gamma shipped me 2.75 " M.A.F. intake pipes and I called them out on that. They claimed the original post by Sam that included 3" was reworked to 2.75" over time.
Not so sure that's true...

theDreamer · 12-15-2016, 11:42 AM

Quote:

Originally Posted by kentmo280z

BTW Matt,
The 1.5 install is coming along. I have the S.C. reinstalled with the new intake & filter. I ended up unbolting the header which made installing the motor mount a snap. Using a air ratchet was a life saver for the header bolts!!
Gamma shipped me 2.75 " M.A.F. intake pipes and I called them out on that. They claimed the original post by Sam that included 3" was reworked to 2.75" over time.
Not so sure that's true...

Interesting, I know the ones I received are larger than the ones on my stage 1 kit, though my stage 1 kit was the original and a ton changed from mine to the next.

My car has been towed to a shop to finish my install, got to the point that I don't have time and just need the car running. Now looking at fuel components so I can do e85/flex fuel.

Chuck33079 · 12-15-2016, 11:46 AM

Quote:

Originally Posted by theDreamer

My car has been towed to a shop to finish my install, got to the point that I don't have time and just need the car running. Now looking at fuel components so I can do e85/flex fuel.

Yeah, every time I had a seemingly free weekend to come help turn wrenches, life kicked me in the nuts.

theDreamer · 12-15-2016, 11:51 AM

Quote:

Originally Posted by Chuck33079

Yeah, every time I had a seemingly free weekend to come help turn wrenches, life kicked me in the nuts.

Yep, between work, baby, and traveling for work it has been almost impossible to do anything. Though I did forget to text you, Langley is back at a shop (Fred Haas in Tomball), easy for me but not everyone. He just started back up this week and I dropped the car off last weekend so he could get to it 1st before any others.

03-22-2016, 03:42 PM	#1 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Stage 2 gtm supercharger pulley specs Has anyone used kraftwerk pulleys with these kits ...they have a 85mm 7rib 6bolt style pattern and from what I find researching it should be able to bolt right up ...only difference is the pulley size is 85 vs 84 .......but I can seem to find gtm pulley specs...this is the kraftwerks pulley .....159-99-8507 - Pulleys - Kraftwerks - Skunk2 Store Any info would be helpful

03-30-2016, 03:44 PM	#6 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	hot damn! thanks for the info. __________________ The GREY GHOST Chronicle instagram: jdmunilla

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] GTM Stage 1 - PULLEY	TopgunZ	Parts for sale (Private Classifieds)	1	12-27-2016 04:47 PM
Torque specs for NST crank pulley install	12nismo	Engine & Drivetrain	23	10-08-2014 07:44 AM
[FOR SALE] Gtm supercharger stage 1	bryantlopez63	Parts for sale (Private Classifieds)	32	11-22-2013 11:11 AM
GTM Supercharger Stage 1 w/ F.I. LTH	theDreamer	Forced Induction	140	03-16-2013 05:50 PM

03-27-2016, 02:37 AM	#3 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	I have the stage two kit and it came with a 92mm pulley 8lbs and I did confirm the pulley 6bolt patterns are the same and that it is the 7 rib ...... And doing the math on the pulleys a 85 mm puts me at just over 90k at 7k rpm .... Which i think fits me best ..I don't like redlining the car and thus will get me boost earlier in the rpm range ... And if I'm doing the math right I should be around 10-11 lbs at 7k

03-28-2016, 05:14 PM	#5 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Yea they only difference was the measurements .. Kraftwerks use 5mm increments ...80-85-90-95 where as GTM was 84..88.. 92... 96

03-30-2016, 05:48 PM	#7 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Lol ... That's how I felt when I found it ... Got my 85mm on the way now will be here 4-4-16

04-04-2016, 04:03 PM	#8 (permalink)
Jinxx Track Member Join Date: Dec 2015 Location: South Carolina Posts: 699 Drives: 2017 nismo 370z Rep Power: 3376	Just a update ...85mm pulley is installed ...went in with no issues I will be testing and logging and planning for a dyno run soon

12-12-2016, 08:11 PM	#9 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	Looking for the torque specs on the GTM S.C. pulley bolts. 6 6mm bolts. There are no specs on the rotrex site for these bolts.

12-13-2016, 04:39 PM	#11 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	I saw that spec earlier. That's not the same bolt as the small (6) 6mm bolts. I just snugged them in to probably 15 lbs.

12-13-2016, 04:47 PM	#12 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	BTW Matt, The 1.5 install is coming along. I have the S.C. reinstalled with the new intake & filter. I ended up unbolting the header which made installing the motor mount a snap. Using a air ratchet was a life saver for the header bolts!! Gamma shipped me 2.75 " M.A.F. intake pipes and I called them out on that. They claimed the original post by Sam that included 3" was reworked to 2.75" over time. Not so sure that's true...