Sticky tires for FI

Hotrodz · 03-16-2016, 03:45 PM

I changed out the suite of rear bushing to SPL and upgraded my rear end and yes there is quite a difference in power to the ground according to my butt dyno and I have a very sensitive butt!

Rusty · 03-16-2016, 04:02 PM

Quote:

Originally Posted by Hotrodz

I changed out the suite of rear bushing to SPL and upgraded my rear end and yes there is quite a difference in power to the ground according to my butt dyno and I have a very sensitive butt!

gbrettin · 03-16-2016, 08:53 PM

I just had RE-11's installed today and these things stick to the road like glue!

Fronts: 265/35/19
Rears: 305/30/19 w/ 20mm spacers

Sent from my SM-G930P using Tapatalk

Hotrodz · 03-16-2016, 09:31 PM

Looks good now drop that bad boy 1 to 1.5 inches and you will be good to go!

Sent from my SM-N910P using Tapatalk

Streetz · 03-17-2016, 08:35 AM

Quote:

Originally Posted by Hotrodz

I changed out the suite of rear bushing to SPL and upgraded my rear end and yes there is quite a difference in power to the ground according to my butt dyno and I have a very sensitive butt!

Nice! The Mustang guys switch out every bushing in the back. Sub frame, Diff, Toe arm, upper and lower control arms, and anything else I am forgetting.

Hotrodz · 03-17-2016, 10:00 AM

I also did the impact bushing, z1 urethane transmission and z1 solid motor mounts. The car is rock solid and if you are sensitive to noise I would not do the sub frame bushings as they will make some noise during deceleration more so than all the other upgrades. I don't mind it at cause it sound like a race car lol. You will also get a whine from upgrading to a solid diff diff bushing too. And you may get some cracking and popping from the SPL upper arms and impact bushing too...just get them greased the best you can. Mine creek when making slow hard turns like backing out of my driveway! I think that sums it up pretty well.

Drew303 · 03-19-2016, 12:22 PM

After doing some research Im leaning towards Nitto NT05R in 305's. Anyone here running these with good results?

cjwsrt6 · 03-20-2016, 09:06 AM

Quote:

Originally Posted by Drew303

After doing some research Im leaning towards Nitto NT05R in 305's. Anyone here running these with good results?

I used them on my crossfire, was able to cut 1.8 consistently with a 12.0, good price and great traction, not an everyday tire, I drove on it for a few weeks, never in the rain but it is a noisy tire

hjo1078 · 03-20-2016, 09:50 AM

just got a set of them, but not mounted yet and my cars still not out of the shop, but i'll let u know how they are

Drew303 · 05-11-2016, 08:39 PM

so.... went to order some NT05r's and looks like they are sold out/back order everywhere. Anyone heard how long until they are available again?

YzGyz · 05-11-2016, 10:04 PM

NT05r 305/35/19, they stick a crap ton better than s04 at the track. My rear camber is at -.05.

I still need more practice at the track as I still bog or spin out.

YzGyz

hjo1078 · 05-11-2016, 11:36 PM

Quote:

Originally Posted by Drew303

so.... went to order some NT05r's and looks like they are sold out/back order everywhere. Anyone heard how long until they are available again?

They are back ordered everywhere. I got mine off ebay. The only place that had them.

Drew303 · 05-12-2016, 11:29 AM

Quote:

Originally Posted by hjo1078

They are back ordered everywhere. I got mine off ebay. The only place that had them.

do you remember which vendor had them????

hjo1078 · 05-13-2016, 12:31 PM

Quote:

Originally Posted by Drew303

do you remember which vendor had them????

it was from directlinewheels on ebay, i had a very good experience ordering from them, they sent me text messages throughout the process with updates.

2 New P305 35R19 Nitto NT05R 305 35 19 Performance 27 44" 0BB Tires 207 570 | eBay

Drew303 · 05-14-2016, 02:52 PM

anyone with the NT05r's had a shop tell you they wont mount them? I had discount tire tell me they wont mount them because of the load rating as in the Z is too heavy for these tires?!?

03-16-2016, 03:45 PM	#46 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I changed out the suite of rear bushing to SPL and upgraded my rear end and yes there is quite a difference in power to the ground according to my butt dyno and I have a very sensitive butt! hjo1078 and AntiVenom like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-16-2016, 08:53 PM	#48 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,283 Drives: Tricycle Rep Power: 589151	I just had RE-11's installed today and these things stick to the road like glue! Fronts: 265/35/19 Rears: 305/30/19 w/ 20mm spacers Sent from my SM-G930P using Tapatalk FPenvy, TBatt, Memphis370Z and 1 others like this.

03-16-2016, 09:31 PM	#49 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Looks good now drop that bad boy 1 to 1.5 inches and you will be good to go! Sent from my SM-N910P using Tapatalk TerribleONE, gbrettin and Memphis370Z like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-17-2016, 10:00 AM	#51 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I also did the impact bushing, z1 urethane transmission and z1 solid motor mounts. The car is rock solid and if you are sensitive to noise I would not do the sub frame bushings as they will make some noise during deceleration more so than all the other upgrades. I don't mind it at cause it sound like a race car lol. You will also get a whine from upgrading to a solid diff diff bushing too. And you may get some cracking and popping from the SPL upper arms and impact bushing too...just get them greased the best you can. Mine creek when making slow hard turns like backing out of my driveway! I think that sums it up pretty well. hjo1078 and AntiVenom like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-19-2016, 12:22 PM	#52 (permalink)
Drew303 Base Member Join Date: Jan 2014 Location: Denver, Co Posts: 142 Drives: 2011 Turbo Nismo Rep Power: 11	After doing some research Im leaning towards Nitto NT05R in 305's. Anyone here running these with good results? hjo1078 likes this.

03-20-2016, 09:50 AM	#54 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 46 Posts: 572 Drives: twin turbo 370z Rep Power: 5395	just got a set of them, but not mounted yet and my cars still not out of the shop, but i'll let u know how they are gbrettin likes this.

05-11-2016, 08:39 PM	#55 (permalink)
Drew303 Base Member Join Date: Jan 2014 Location: Denver, Co Posts: 142 Drives: 2011 Turbo Nismo Rep Power: 11	so.... went to order some NT05r's and looks like they are sold out/back order everywhere. Anyone heard how long until they are available again? hjo1078 likes this.

05-11-2016, 10:04 PM	#56 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	NT05r 305/35/19, they stick a crap ton better than s04 at the track. My rear camber is at -.05. I still need more practice at the track as I still bog or spin out. YzGyz blueranger likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

05-14-2016, 02:52 PM	#60 (permalink)
Drew303 Base Member Join Date: Jan 2014 Location: Denver, Co Posts: 142 Drives: 2011 Turbo Nismo Rep Power: 11	anyone with the NT05r's had a shop tell you they wont mount them? I had discount tire tell me they wont mount them because of the load rating as in the Z is too heavy for these tires?!?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sticky*** Steering Lock Failure Database *** Sticky	Trips	Nissan 370Z General Discussions	83	01-07-2023 11:58 AM
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 08:35 AM
Power steering reliability with sticky tires	gomer_110	Track / Autocross / Drifting / Dragstrip	15	11-22-2012 06:26 PM
Light wheels or sticky tires	TBOX	Wheels & Tires	16	06-10-2011 11:25 AM
Sticky Tires?	douglaslperry	Other Vehicles	0	08-01-2010 10:44 PM