top mount twin turbos.

Jayhovah

I'll bet the installation is a good bit easier with no need to drop the motor for something like this. Plenty of room to work around the turbos in that position with the stock airboxes out.... Much easier to service too. I get that the manifold/turbo design on kits like FI, AAM, and my Gamma kit are great for performance.. but knowing that I will have to disassemble the entire kit installation to service darn near anything turbo related kind of turns me off. =) Then again, my frame of mind is such that I would have definitely done a BP kit in the absence of the GTM Group buy pricing (which was honored by Gamma in my case).

Looks cool too. Would be pretty sweet if someone came up with a more streetable (smaller) twin kit like this!

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

37winner

Setting up the manifold required to take out the motor multiple times. It was really tweak and peaking the mock up, but afterwards it was smooth sailing.

I previously had the GTM kit, and it was decent. I didn't like it because it was only low to mid end power. People with top end were killing me.

So I wanted something to at least compete with people with top end power. It's one of the reasons why I went with this design that so many people said it would be impossible to do so.

But on a positive note. I can upgrade to bigger turbos that would work well with the motor with ease at least. =)

I'm thinking about getting the new gen 6466 turbos. Well, if the 62's don't play out and all that.

I'll post up a dyno sheet showing the results of what's going on.

Rusty

Sounds like you have a plan in place.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

37winner

I try my best.

Boosted Performance

How did you run your down pipes? that is the biggest challenge with with the top mount twin kit. On the VHR the passenger side is not bad, but the driver side is a PITA, the reverse is true on the VQ35DE cars.

I suppose there is a way to work around it with some creative header design. Still very tight though.

Two 62mm turbos would be good to 1200whp all day long, provided the turbine housings chosen are large enough.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Elmo370z

You boosted folks have all the fun, damn you all lol

6mt370

What are the specs on the 1000hp+ built motor that you have?

37winner

This bottle of excuses.

I'll do a write up later. I don't even know where to begin. Unless you want to write it for me.

Attached Images

review-johnnie-walker-blue-label-1.jpg (73.9 KB, 53 views)

6mt370

Built motor specs?

37winner

It's built with high end brand name stuff.

FPenvy

so if you have no intentions on answering peoples questions about this build why did you even make the thread to begin with?

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

37winner

I did though. For entertainment purposes.

37winner

haha I'm only ******* with ya.

I'll do a write up later when I get to it.

37winner

https://www.youtube.com/watch?v=pXja1NjVoQ8

I did a write up while taking a ****, and my phone crapped out. Enjoy the video I'll do the write up again later.

PongSanity

"Do the backfire thing. Cmon when I go back there, do the back fire thing." LOL. sounds incredible. Big plus for it to be done on a G37 lol. That was a biased statement haha


Sent from my iPhone using Tapatalk