Originally Posted by wideglideleon I had that exact support brace but sold it since I have never had issues with flex ,although I am only running 9.5 - 10 lbs
|
|
LinkBack | Thread Tools | Display Modes |
05-29-2019, 04:46 PM | #2656 (permalink) |
Base Member
Join Date: Sep 2013
Location: pittsburgh
Posts: 106
Drives: '14 Z Sport Tour 6M
Rep Power: 3367 |
Wow - what's your setup? How are you getting that much boost? If this is detailed somewhere, can you point me to it? I'm only getting 8lbs if I run it all the way to redline & maybe a bit above.
__________________
TopGunZ Rotrex SC / CJM RFS / 1300 / Ecutek / Dynosty / F.I. TP & CBE / Z1 / Swift / SPL / Whiteline / Hotchkis / Michelin SP4 |
06-03-2019, 07:19 PM | #2658 (permalink) |
Base Member
Join Date: Aug 2017
Location: DFW TEXAS
Posts: 74
Drives: S/C 40th 370Z
Rep Power: 67 |
Stupid question: Is it easier to switch out the S/C pulley to the 9 psi one and risk belt slip at higher RPM's? Or change out the pulley on the other side of the bracket b/c it has a tension adjuster underneath?
|
06-03-2019, 07:39 PM | #2659 (permalink) |
A True Z Fanatic
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,360
Drives: 2014 Nismo Gunmetal
Rep Power: 2684374 |
The 9 psi pulley everyone is talking about goes on the front (serpentine) side.
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp |
06-03-2019, 08:58 PM | #2660 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
9psi on serp. Then add my no slip pulley.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
06-04-2019, 10:13 AM | #2662 (permalink) |
A True Z Fanatic
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,360
Drives: 2014 Nismo Gunmetal
Rep Power: 2684374 |
Tbatt and Topgunz both offer a no slip idler pulley for the serpentine side. It's a good idea for higher boost applications.
__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp |
06-05-2019, 09:51 PM | #2663 (permalink) |
Base Member
Join Date: Aug 2017
Location: Colorado
Posts: 103
Drives: Infiniti G37s 6MT
Rep Power: 8 |
Twincharged?
I haven’t seen any results when I search on VHR although it looks like Topgunz did it on a DE/HR? Nobody done it on VHR? What do you think about it? Build the block closed deck maybe 9:1 compression, mid or rear mount turbo, turbo piping would go in right before the IC. Doable? I know Redondoaveb already has a wastegate setup he shpuld do it, or at least that’s the next step of progression we could do.
I know newer Volvos are doing twincharged but their reliability is awful, been done on WRX’s but that’s kinda stupid bcuz you gotta build the motor, the tranny... think we could do better on this VQ?
__________________
09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby |
06-06-2019, 08:18 AM | #2664 (permalink) | |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Quote:
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
|
06-06-2019, 11:50 AM | #2666 (permalink) |
Base Member
Join Date: Sep 2017
Location: Taiwan
Posts: 165
Drives: 15 Z, 13 R58, 09 GTR
Rep Power: 8 |
Both can achieve effective and efficient tuning. It's really up to the tuner. It will be better replacing your MAFs with the UpRev MAF GT sensors when using UpRev. ECUTek offers SD-hybrid tuning allowing tuner to tune your Z based on MAFs and MAP - an alternative and flexible solution. Should you will run E85, ECUTek has been the only tool I have seen here for tuning flex fuel so far.
__________________
610whp/462wtq A2A- 6.8s@100-200km (stock motor) / IG: minized123456 / 淬 Custom VQ Vortech-based supercharger parts made to order! https://www.instagram.com/p/CFUjDc5H...d=m0unws28pvk4 |
06-06-2019, 01:49 PM | #2667 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
I would only recommend Ecutek. The pro tuners who tune with both platforms will highly encourage you to Ecutek tune.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
06-16-2019, 11:39 AM | #2669 (permalink) |
Track Member
Join Date: Jun 2015
Location: Granbury, TX
Posts: 550
Drives: '11 SC Blue 7AT
Rep Power: 3366 |
Data is regarding the supplied filter with the kit.
So to go back to the filter question and R&D. I installed everything, ran no filter, and saw 12.6 psi. My tuner suggested that I put the filter on to protect from grime buildup and we would continue tuning. Yesterday I put the filter on and did some pulls. The most pressure I saw was 7.6 psi, giver or take .5 psi. To recap: Filter off: 12.6 psi Filter on : 7.6 psi I've had this kit on two cars now and I've threads showing how thoroughly I've searched for leaks or low boost pressure causes. It was this simple all along... Also, to be clear, this is a fantastic kit! Aaron has done an awesome job! Like everything else, we just find ways to make it more efficient. Last edited by turtle64b; 06-16-2019 at 12:10 PM. |
06-16-2019, 11:50 AM | #2670 (permalink) | |
Base Member
Join Date: Apr 2015
Location: uk
Posts: 187
Drives: 370
Rep Power: 10 |
Quote:
Sent from my SM-G960F using Tapatalk |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |