Temp it must be. Gonna deal with crashbar later when i get new bumper on, work is picking up and my RFS supposed to arrive wednesday so no time to
|
|
LinkBack | Thread Tools | Display Modes |
05-06-2018, 11:39 AM | #2371 (permalink) |
Base Member
Join Date: Aug 2017
Location: Colorado
Posts: 103
Drives: Infiniti G37s 6MT
Rep Power: 8 |
Temp it must be. Gonna deal with crashbar later when i get new bumper on, work is picking up and my RFS supposed to arrive wednesday so no time to mess with crashbar now. Hopefully i’m boosted and doing datalogs in a week!
__________________
09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby |
05-06-2018, 06:46 PM | #2373 (permalink) | |
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836 |
Quote:
I will be running 91 octane at first, since my car won't be tuned or capable of efficiently holding E85 yet. So once I get those results i will definitely post them!! The following upgrades that will be on the car when the car is up and running again is as follows: [x] KW V3 Suspension [x] Quaife LSD [x] X pipe, Magnaflow custom exhaust [x] Fresh GTR Spark Plugs [x] Fresh O2 Sensors [x] Fresh 1050x ID [x] 928 Exclusive Impeller & Double High Speed Bearings for V3 SCi [x] Upgraded V3 SCi Supercharger [x] TopgunZ full A2A Conversion Kit [x] ATI Super Damper Pulley; Stock Size [x] Fresh YellowTop Optima Battery [x] Whiteline Differential Bushings [x] 3.0" & 3.47" Supercharger Side Pulleys [x] 9psi Pulley on Serpentine side [x] Z1 High Pressure Radiator Cap [x] Z1 Thermal Gold Reflective Tape [x] Fresh OEM Nissan Coolant As for the engine specs: [x] RJM Closed Deck VQ37HR short bare block + added crank / Set of heads [x] Spec IV IPP block which includes: - Wiseco or JE Pistons .020 over - Carillo H Beam Rods - ARP WMC 3/8" Rod Bolts - ARP L19 Head Bolts - Block inspected and cleaned - Block redecked - Block Bored and Honed using a Torque Plate - Rotating assembly balanced - Crank magnafluxed and the journals micro-polished - New Moly coated Race Spec main bearings installed - New Moly coated Nissan OEM rod bearings installed - Block prepped and assembled - Cometic Head Gaskets - Jim Wolf Technology(JWT) Exhaust Cams - JWT High RPM Valve Spring - JWT Valve Spring Shim - JWT Extended Cam Sprocket Bolts - JWT Cam Sprocket Bolt Washer - JWT Rear Camshaft Bolt - JWT Cam Bolt Seal - Copper - Heads inspected and cleaned - Heads redecked - Ported exhaust and intake runners - 5 angle valve job - New OEM Valve stem seals installed - Valve Stem Heights set - Cold Clearance set for stock cams - Heads prepped and assembled - New OEM Oil Pump Engine will come with Heads bolted to block and torqued to spec Last edited by cupcakez; 05-06-2018 at 06:49 PM. |
|
05-06-2018, 07:47 PM | #2375 (permalink) | |
Base Member
Join Date: Jul 2017
Location: Northern New Jersey
Posts: 156
Drives: 2009 370z 6MT
Rep Power: 4621 |
Quote:
Just guessing - High 11's and 120 ish
__________________
- -Z&I ~~~~ |
|
05-08-2018, 03:16 AM | #2376 (permalink) |
Track Member
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 16 |
300k's on supercharger after Si upgrade and it's completely seized up, won't move, anyone else had this happen? I've rang the Australian distributor here and I have to send the unit back to them for inspection, surely it's something wrong with the install of the new components/bearings?
Anyone else had this happen? had previously done 40,000k's on the unit before upgrades.. |
05-08-2018, 06:55 PM | #2377 (permalink) | |
Enthusiast Member
Join Date: Mar 2013
Location: Australia
Posts: 455
Drives: 2012 Nissan 370Z MT
Rep Power: 20144 |
Quote:
Who is the Australian distributor you mention? Last edited by Optimiser; 05-08-2018 at 06:57 PM. Reason: spelling |
|
05-08-2018, 07:00 PM | #2378 (permalink) | |
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836 |
Quote:
Luckily I found a local mobile mechanic willing to do it for me for a good price. His work was flawless. The clearance between the 928 impeller and the outer edge is perfect. Just make sure you don't lose the small rectangular key that goes into the Supercharger to keep the pulley from spinning or you may lose boost I think. When we opened mine...my key thing fell out so we were like wow I was loosing boost probably the entire time!! Also, my outer edge impeller blade (circular part) got chipped -- not sure where the chipped piece went or how long it was chipped for, but it is now replaced with the 928 impeller along with high speed bearings and such. Yay! Good luck with your install and I hope all goes well. |
|
05-09-2018, 11:21 AM | #2379 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
The key on the external shaft pulley is either in there or it isnt. If it fell out then it was in there and the mechanics of it are impossible for it to have not locked the pulley into place. You were not loosing boost.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 05-09-2018 at 11:23 AM. |
05-09-2018, 05:22 PM | #2380 (permalink) |
Base Member
Join Date: Aug 2017
Location: Colorado
Posts: 103
Drives: Infiniti G37s 6MT
Rep Power: 8 |
Hey guys just to clarify, I need to make a cut for the charge pipe right? Anyone worked around it? I have long tube intakes already but I would need to re-route piping to get the charge pipe down there and may still need to fab and that would be extra piping.
Just curious what people have done before I whip out the dremel since what I’m cutting is pretty sturdy/possibly structural. I think that’s the only cut i have to make but could be wrong since blower isn’t on yet.
__________________
09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby Last edited by G3RSTY7; 05-09-2018 at 05:25 PM. |
05-09-2018, 09:57 PM | #2381 (permalink) | |
Track Member
Join Date: Jun 2015
Location: Granbury, TX
Posts: 550
Drives: '11 SC Blue 7AT
Rep Power: 3366 |
Quote:
|
|
05-09-2018, 09:58 PM | #2382 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Did you get the install instructions? The cut is there and on the other side for the SC volute.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
05-11-2018, 02:41 AM | #2383 (permalink) |
Base Member
Join Date: Aug 2017
Location: Colorado
Posts: 103
Drives: Infiniti G37s 6MT
Rep Power: 8 |
Yours or stillen’s? I’ve saved a PDF of stillen not sure how much different yours would be
__________________
09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby |
05-11-2018, 07:43 AM | #2384 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Mine covers all of the Air to Air piping, intercooler, cutting required, etc... Stillens does not. PM me your email.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
05-16-2018, 07:05 AM | #2385 (permalink) | |
Track Member
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 16 |
Quote:
|
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |