Originally Posted by redondoaveb No point in swapping the pulleys out until you get the super vortech upgrade as you want the ceramic bearings for the pulley upgrade. Are you
|
|
LinkBack | Thread Tools | Display Modes |
02-07-2018, 07:16 PM | #2266 (permalink) | |
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836 |
Quote:
Doesnt the 928 place offer an option in which they send you the ceramic bearing parts / impeller and you can have a professional install it into the blower as well? Or am I tripping and I am making up that option? lol If so, I may ask them to send it for the cheaper price and then have a local shop install it who specializes in aftermarket parts as well (assuming they say they can do it after I call & ask) I had the 2.85" pulley but returned it after research to find out the 3" would better suit my end goals. |
|
02-07-2018, 07:53 PM | #2267 (permalink) | |
A True Z Fanatic
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,366
Drives: 2014 Nismo Gunmetal
Rep Power: 2684374 |
Quote:
You can definitely just purchase the parts from 928 and if I remember right they have a list of recommended installers on their site. If I do another pulley upgrade I'll probably do the 3" instead of the 2.85 too. |
|
02-08-2018, 03:20 AM | #2268 (permalink) | |
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836 |
Quote:
I also would assume any aftermarket automechanical shop could do the install for less than 600 to 700 lol seeing as the blower is small, not extremely complicated, and the kit comes with 6 small pieces. i think I will go that route That plus the pulley swaps. Im wondering maybe since my motor is not going to be stock anymore, I could possibly run a 2.85" pulley safely with Sebz tune? I also had a question: Is Sebz tuning like $950 for each time you want your car tuned, or do you pay for a set of tunes that you can use throughout a certain time period...or none of the above? |
|
02-08-2018, 10:36 AM | #2269 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Hey guys. Just in case people are not looking at new threads, here is a link to my stand alone supercharger kit for sale.
Topgunz full supercharger kits!!
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
02-08-2018, 03:05 PM | #2270 (permalink) | |
A True Z Fanatic
Join Date: Apr 2017
Location: So. Commiefornia
Posts: 6,366
Drives: 2014 Nismo Gunmetal
Rep Power: 2684374 |
Quote:
Your other questions would be better answered by Seb. |
|
02-08-2018, 04:40 PM | #2271 (permalink) | |
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836 |
Quote:
2 matched Timken ceramic high-speed bearings 2 HSS input shaft bearings 1 Premium High-Speed Mechanical Seal 1 PTFE-coated Viton input shaft seal Standard Package: 2 input shaft bearings 2 matched impeller shaft thrust bearings 1 Viton input shaft seal 1 PTFE-coated Viton impeller shaft seal Yup. I asked Seb just not too long ago. SpecialtyZ, at least Seb has not swapped out bearings on a supercharger yet, but said the wheel is very easy and straight forward to swap out. |
|
02-09-2018, 09:54 AM | #2272 (permalink) |
Track Member
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 16 |
My builds currently at the shop being sorted, long story short took to a mates workshop who ****** the install of the wiring of the fuel pump stuff, so it's having to be re-done/fixed up...
I've got 9lb pulley, Si trim upgrade, S1.SE fuel system with 340 pump and 1050idx injectors, topgunz A2A kit etc.. will be running on E85 only. Guessing this will give around 500rwhp here in Aus, our dyno's always seem to run low, what is the next step that will put the fuel system to 90% or so? Is there some other pulleys I can change to take advantage of more boost? |
02-09-2018, 10:10 AM | #2273 (permalink) |
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836 |
Yeah. I have done extensive research on pulleys and with the help of quite a few members of this forum!
I will be glad to share the information!! This is what I will be doing for optimal boost gains! BUT AFTER...I get the A2A kit installed, Super Vortech Impeller Upgrade from 928 motorsports, and when my engine is finished being installed. Although I plan to swap out the 3.0 for a 2.85 possibly -- because I will have a much stronger engine But will need to do more research on that first. - Vortech 8 Rib 3.47 Inch Supercharger Drive Pulley (Jack side) 2A038-347 https://www.summitracing.com/parts/vor-2a038-347 - $100 - Vortech Supercharger Pulley 3.0'' (Supercharger Side) 2A038-300 https://www.summitracing.com/parts/vor-2a038-300 - $102 - 9psi pulley (Replace the 8psi pulley that the stillen kit came with which is on jackshaft serpentine side) https://conceptzperformance.com/stil...13_p_19055.php - $220 |
02-09-2018, 04:40 PM | #2274 (permalink) |
Base Member
Join Date: May 2017
Location: Argentina
Posts: 5
Drives: 370z. 2010. Grey. Mt
Rep Power: 8 |
Hello
I have a 2010 370z Admin tuned Stillen sc 928 and stillen 9psi pulley A2A kit And much more Enter the dyno with 460whp in 93 Ron and left with 533whp on 93 Ron + meth. Thank to Aaron for kid great kit and all the advices. Thanks to admin tuning. Moncef you are the man. This numbers were on Dyno hot as hell. It was over 45 degrees Celsius and the car was hitting only 11 psi and on the street it hits 14 psi. So this 533whp will be much more on the street. Thanks Enviado desde mi Phone mediante Tapatalk |
02-09-2018, 04:47 PM | #2275 (permalink) |
Track Member
Join Date: Oct 2017
Location: California
Posts: 635
Drives: 2009-7AT-Base-Coup
Rep Power: 4836 |
Nice Numbers man!!!! Although I don't know what Ron means, it sounds good to me!! Numbers don't lie! (usually) xD
And hot damn 45 degrees C? I'm so glad I don't live in an area that hot otherwise I would melt every single time |
02-09-2018, 04:53 PM | #2276 (permalink) | |
Base Member
Join Date: May 2017
Location: Argentina
Posts: 5
Drives: 370z. 2010. Grey. Mt
Rep Power: 8 |
Quote:
93 Ron is for you to know that kind of fuel I have here. It's the same 93 Ron they use in the USA. Then they have e85 which is the best fuel to use in my opinion. I will try it some day Enviado desde mi Phone mediante Tapatalk |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |