Topgunz - air to air upgrade

TBatt · 01-16-2018, 04:20 PM

Quote:

Originally Posted by MoulaZ

Hard to explain, and will try and get a clip but the best I could describe is like when an idler pulley is on it's way out.

I did notice a little bit of green on the very 1-2mm edge of the idler pulley you supply when installed. Easily rubbed off with a finger though.

Give it a few miles (kilometers in your case) to get broken in.

Check the idler and see if it is running hot. That could indicate that the bearing is bad.

redondoaveb · 01-20-2018, 01:16 PM

My car made Specialty Z's Instagram page.

https://www.instagram.com/p/BeKIpuljVDU/

Senna-F1 · 01-20-2018, 01:42 PM

Quote:

Originally Posted by redondoaveb

My car made Specialty Z's Instagram page.

https://www.instagram.com/p/BeKIpuljVDU/

Fantastic! Do you know why he eased off the throttle at 7000 RPM?

redondoaveb · 01-20-2018, 02:37 PM

Quote:

Originally Posted by Senna-F1

Fantastic! Do you know why he eased off the throttle at 7000 RPM?

Thanks. I haven't asked him about that.

overtureZ · 01-20-2018, 04:12 PM

Hey Aaron, the Tial you provide comes with the correct spring right?

TopgunZ · 01-20-2018, 04:36 PM

The correct spring is 1.5psi. It would have came with that.

brucelidat · 01-20-2018, 06:44 PM

Is this about what we should be expecting from the kit? Do you ave a dyno you can post?

Quote:

Originally Posted by redondoaveb

My car made Specialty Z's Instagram page.

https://www.instagram.com/p/BeKIpuljVDU/

redondoaveb · 01-20-2018, 07:03 PM

Quote:

Originally Posted by brucelidat

Is this about what we should be expecting from the kit? Do you ave a dyno you can post?

I think topgunz could better answer the first question. If you scroll through the 4 pages of the instagram link you'll see dyno results.

brucelidat · 01-20-2018, 07:09 PM

nice, man

Senna-F1 · 01-20-2018, 07:16 PM

Quote:

Originally Posted by brucelidat

Is this about what we should be expecting from the kit? Do you ave a dyno you can post?

Here you go.

redondoaveb · 01-20-2018, 07:21 PM

Quote:

Originally Posted by brucelidat

nice, man

Thank you

overtureZ · 01-23-2018, 07:58 PM

Aaron, did you get my PM about buying your leak test setup?

TopgunZ · 01-23-2018, 09:03 PM

Here you go. Get a 2.5" pvc cap. Schaeder valve, nut and a rubber washer. Make it look like this. Place it in the intercooler inlet. Pressurize it with compressor. Call me with questions.

overtureZ · 01-24-2018, 12:08 PM

Think a bike pump will work?

TopgunZ · 01-24-2018, 12:21 PM

Quote:

Originally Posted by overtureZ

Think a bike pump will work?

Well, you wouldnt need to get on the treadmill afterwards.

01-20-2018, 01:16 PM	#2237 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,360 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	My car made Specialty Z's Instagram page. https://www.instagram.com/p/BeKIpuljVDU/ phunk, brucelidat, Rusty and 3 others like this.

01-20-2018, 04:12 PM	#2240 (permalink)
overtureZ Enthusiast Member Join Date: Dec 2015 Location: Middle TN Age: 30 Posts: 319 Drives: Da Boosted Z Rep Power: 9	Hey Aaron, the Tial you provide comes with the correct spring right? __________________ Auto/Z Enthusiast - Mechanical Engineer - Fabricator - Do it for dale

01-20-2018, 04:36 PM	#2241 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	The correct spring is 1.5psi. It would have came with that. overtureZ likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-20-2018, 07:09 PM	#2244 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	nice, man __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-23-2018, 07:58 PM	#2247 (permalink)
overtureZ Enthusiast Member Join Date: Dec 2015 Location: Middle TN Age: 30 Posts: 319 Drives: Da Boosted Z Rep Power: 9	Aaron, did you get my PM about buying your leak test setup? __________________ Auto/Z Enthusiast - Mechanical Engineer - Fabricator - Do it for dale

01-23-2018, 09:03 PM	#2248 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Here you go. Get a 2.5" pvc cap. Schaeder valve, nut and a rubber washer. Make it look like this. Place it in the intercooler inlet. Pressurize it with compressor. Call me with questions. overtureZ likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-24-2018, 12:08 PM	#2249 (permalink)
overtureZ Enthusiast Member Join Date: Dec 2015 Location: Middle TN Age: 30 Posts: 319 Drives: Da Boosted Z Rep Power: 9	Think a bike pump will work? __________________ Auto/Z Enthusiast - Mechanical Engineer - Fabricator - Do it for dale

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM