Topgunz - air to air upgrade

Bens98gagt · 01-03-2018, 12:22 AM

Quote:

Originally Posted by TopgunZ

Dang Ben! Thanks to SOHO for the write up!

Senna F1 just text me this... Breakin records and chirpin brodies!

https://sohomotorsports.com/700-rwhp...d-nissan-370z/

Thanks bud.. I owe it to your awesome system... I imagine Stillen is selling allot more kits because of you. Lol

Bens98gagt · 01-03-2018, 12:23 AM

Quote:

Originally Posted by Senna-F1

All with the stock hood and strut tower brace! Haha

Sent from my iPhone using Tapatalk

Ultimate Sleeper baby...😜

Bens98gagt · 01-03-2018, 12:25 AM

Quote:

Originally Posted by TopgunZ

There's a full SC kit heading in SOHOs direction. Already have some parts en route. It will be a "mild" build keeping the whp under 500 and wheel torque under 400 due to it being an auto trans. Should be great feedback for those AT guys though.

Evan is on a AT and doing over 700 to so it can be done... 😉

TopgunZ · 01-03-2018, 10:38 AM

Quote:

Originally Posted by Bens98gagt

Evan is on a AT and doing over 700 to so it can be done... 😉

I am talking on the stock tranny and not shelling out 5K for a built one.

BOLIO 671 · 01-03-2018, 07:46 PM

Quote:

Originally Posted by TopgunZ

Dang Ben! Thanks to SOHO for the write up!

Senna F1 just text me this... Breakin records and chirpin brodies!

https://sohomotorsports.com/700-rwhp...d-nissan-370z/

Awesome+!!!! What work did u have done to ur blower st 928 Ben?

redondoaveb · 01-03-2018, 08:15 PM

Quote:

Originally Posted by BOLIO 671

Awesome+!!!! What work did u have done to ur blower st 928 Ben?

I believe he has the "super vortech" kit installed.

https://928motorsports.com/parts/super_vortech.php

Bens98gagt · 01-03-2018, 08:23 PM

Quote:

Originally Posted by redondoaveb

I believe he had the "super vortech" kit installed.

https://928motorsports.com/parts/super_vortech.php

Yes sir...

Bens98gagt · 01-03-2018, 08:24 PM

Quote:

Originally Posted by TopgunZ

I am talking on the stock tranny and not shelling out 5K for a built one.

Oh yeah thats right I forgot he is on a built AT...

BOLIO 671 · 01-04-2018, 02:22 AM

Quote:

Originally Posted by redondoaveb

I believe he has the "super vortech" kit installed.

https://928motorsports.com/parts/super_vortech.php

Quote:

Originally Posted by Bens98gagt

Yes sir...

Ahhhhh....I see.....the same set up that Evan did.....Very Sweeeet....

MoulaZ · 01-06-2018, 05:33 PM

Just finished installing my TBatt pulley and belt, super easy install. But I'm noticing a moderately audible whine now, between 1-4K RPM. Probably higher as well but exhaust drowns it out.

Is this to be expected, or is something else going on now?

TBatt · 01-08-2018, 03:08 PM

Quote:

Originally Posted by MoulaZ

Just finished installing my TBatt pulley and belt, super easy install. But I'm noticing a moderately audible whine now, between 1-4K RPM. Probably higher as well but exhaust drowns it out.

Is this to be expected, or is something else going on now?

No, it is not expected with the kit. What is your belt tensioner looking like?

It should look like mine in the picture.

MoulaZ · 01-10-2018, 05:10 AM

This is mine.

TBatt · 01-10-2018, 02:44 PM

Close enough.

What kind of noise is it making? You said a whine but that could be alternator noise.

The only other person that reported a noise was because the belt needed to be broken in. The edge left by cutting off one rib isn't as smooth as the factory cut so it may just need to run for awhile and get broken in.

MoulaZ · 01-11-2018, 02:49 AM

Hard to explain, and will try and get a clip but the best I could describe is like when an idler pulley is on it's way out.

I did notice a little bit of green on the very 1-2mm edge of the idler pulley you supply when installed. Easily rubbed off with a finger though.

redondoaveb · 01-11-2018, 11:49 PM

Just got my tune done. Si supercharger with 9 lb pulley. 470 on 91 and 540 on e85.
https://youtu.be/t2t6p_fX7a4
https://www.instagram.com/p/Bd1lLfBFOQJ/
I want to say thanks to Aaron (a2a), CJM (fuel system), L-Spec (install) and especially Seb@Specialty Z for doing a great tune and putting up with all my questions. He was such a pleasure to work with. Oh yeah, I forgot about TBatt for his tensioner kit. No belt slip at all!

01-10-2018, 02:44 PM	#2233 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	Close enough. What kind of noise is it making? You said a whine but that could be alternator noise. The only other person that reported a noise was because the belt needed to be broken in. The edge left by cutting off one rib isn't as smooth as the factory cut so it may just need to run for awhile and get broken in. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

01-11-2018, 11:49 PM	#2235 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,360 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Just got my tune done. Si supercharger with 9 lb pulley. 470 on 91 and 540 on e85. https://youtu.be/t2t6p_fX7a4 https://www.instagram.com/p/Bd1lLfBFOQJ/ I want to say thanks to Aaron (a2a), CJM (fuel system), L-Spec (install) and especially Seb@Specialty Z for doing a great tune and putting up with all my questions. He was such a pleasure to work with. Oh yeah, I forgot about TBatt for his tensioner kit. No belt slip at all! BOLIO 671, TopgunZ, TBatt and 5 others like this. Last edited by redondoaveb; 01-16-2018 at 05:09 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM

01-06-2018, 05:33 PM	#2230 (permalink)
MoulaZ Base Member Join Date: Jun 2013 Location: Sydney, Australia Posts: 230 Drives: '09 Z34 BP Turbo V2 Rep Power: 25	Just finished installing my TBatt pulley and belt, super easy install. But I'm noticing a moderately audible whine now, between 1-4K RPM. Probably higher as well but exhaust drowns it out. Is this to be expected, or is something else going on now?

01-11-2018, 02:49 AM	#2234 (permalink)
MoulaZ Base Member Join Date: Jun 2013 Location: Sydney, Australia Posts: 230 Drives: '09 Z34 BP Turbo V2 Rep Power: 25	Hard to explain, and will try and get a clip but the best I could describe is like when an idler pulley is on it's way out. I did notice a little bit of green on the very 1-2mm edge of the idler pulley you supply when installed. Easily rubbed off with a finger though.