Topgunz - air to air upgrade

URBiN~HURMiT · 10-17-2017, 08:06 PM

Quote:

Originally Posted by milkcow500

It uses the same mounting bracket as the V3 and has already been test fitted on another vehicle.

Edit: You are looking at the dimensions of the inlets/outlets by the way. I don't think they list the actual dimensions of the blowers, but you can find pics online. The V7 is slightly larger, but has the same mounting bolts.

As long as you know [and the V7 has successfully been integrated to the Stillen kit] ... the V7 is physically larger than the V3...and is overkill, unless you have a built motor and are really shooting for the moon power wise.
From what I've researched, the V7 is less efficient at lower RPMs.

The mounting bracket does work - it's the other clearances and belt alignments that you'll have to address.

I did attempt to upgrade the Stillen with a V2-TI a few years back [similar in size to the V7] and ran into some issues here.

This was before TogGunZ came out with his Stillen A2A kit.
TopGunZ bought my Stillen Kit to begin his design project.
Which has been 'Super' Successful by all accounts...Kudos.

milkcow500 · 10-17-2017, 08:21 PM

Quote:

Originally Posted by URBiN~HURMiT

As long as you know [and the V7 has successfully been integrated to the Stillen kit] ... the V7 is physically larger than the V3...and is overkill, unless you have a built motor and are really shooting for the moon power wise.
From what I've researched, the V7 is less efficient at lower RPMs.

The mounting bracket does work - it's the other clearances and belt alignments that you'll have to address.

I did attempt to upgrade the Stillen with a V2-TI a few years back [similar in size to the V7] and ran into some issues here.

This was before TogGunZ came out with his Stillen A2A kit.
TopGunZ bought my Stillen Kit to begin his design project.
Which has been 'Super' Successful by all accounts...Kudos.

Yeah, I actually didn't go this route at first because I heard the V2 had some issues. I guess it may have been you people were discussing.

There are certain properties to the V7 that are better than the V3 and there are multiple ways to fix the efficiency and lower end issues. Belt alignment is fine though. My only fear is that I may run into belt slip issues with this setup. I'll be posting a new thread once I get my car back, but it will be interesting to see how well the stock block handles.

URBiN~HURMiT · 10-17-2017, 08:52 PM

Quote:

Originally Posted by milkcow500

Yeah, I actually didn't go this route at first because I heard the V2 had some issues. I guess it may have been you people were discussing.

There are certain properties to the V7 that are better than the V3 and there are multiple ways to fix the efficiency and lower end issues. Belt alignment is fine though. My only fear is that I may run into belt slip issues with this setup. I'll be posting a new thread once I get my car back, but it will be interesting to see how well the stock block handles.

Go for it !!!

MoulaZ · 10-18-2017, 08:51 AM

Quote:

Originally Posted by MoulaZ

Questions sir!

Where will the SC be mounted, same position?
If not, then where and and got any photos of the bracket?
Can we buy the bracket seperate for those have the original Stillen kit already?

Can I get an answer on the above?

And one more, and probably the one most important to me, does your setup allow a proper 3" intake pipe to be routed from SC unit to outside the engine bay somehow without some God awful bends or kinks?

TopgunZ · 10-18-2017, 09:01 AM

Again, the design is very similar to the existing design. The idea here is not for guys that have the A2A kit already to upgrade to a better kit. It is for those who want a supercharger and do not yet have a kit. So it is a kit available on the market for around $6k (tuner) that makes great power out of the box vs. having to spend upwards of $9 to $10K + to reach power limits that everyone is chasing with a supercharger.

sirnixalot · 10-18-2017, 11:45 AM

Quote:

Originally Posted by TopgunZ

Again, the design is very similar to the existing design. The idea here is not for guys that have the A2A kit already to upgrade to a better kit. It is for those who want a supercharger and do not yet have a kit. So it is a kit available on the market for around $6k (tuner) that makes great power out of the box vs. having to spend upwards of $9 to $10K + to reach power limits that everyone is chasing with a supercharger.

Will your new kit work with the stock intake manifold/throttle bodies?

TopgunZ · 10-18-2017, 11:50 AM

It will be replaced with the dual side manifold and keep the Y pipe. Stock throttle bodies are utilized.

wideglideleon · 10-18-2017, 02:34 PM

Stillen manifold? That thing is such a PITA to install or remove with those %&#% hidden bolts.

G3RSTY7 · 10-19-2017, 12:58 PM

Aaron have you posted about this development to myg37 or should i start a thread letting people know its happening?

TopgunZ · 10-19-2017, 01:02 PM

Quote:

Originally Posted by wideglideleon

Stillen manifold? That thing is such a PITA to install or remove with those %&#% hidden bolts.

Well, at least you only have to put it on once since it is done right this time.

TopgunZ · 10-19-2017, 01:03 PM

Quote:

Originally Posted by G3RSTY7

Aaron have you posted about this development to myg37 or should i start a thread letting people know its happening?

Ill hold off until I have kits, pics to start a thread here.

overtureZ · 10-20-2017, 08:22 AM

Hey Topz, I replied to your PM about my deposit

redondoaveb · 10-20-2017, 01:27 PM

Found this on Specialtyz's instagram page, can't wait to hear mine.
https://www.instagram.com/p/BQUKVbkgu4Q/

G3RSTY7 · 10-20-2017, 03:31 PM

Quote:

Originally Posted by redondoaveb

Found this on Specialtyz's instagram page, can't wait to hear mine.
https://www.instagram.com/p/BQUKVbkgu4Q/

Oh yeah man! The guy with the Q50sc also has a sick video. I watch those and tears of excitment gush out of my eyes, my god I can't wait! We'll see how long a stock block lasts with the supervortech, especially if I run a small pulley.. maybe I should stick with the standard at first so I at least get some enjoyment before the thing blows

Z Warrior · 10-23-2017, 09:33 AM

Will the new kit be compatible with the 08 G37 coupe RWD 5AT?

10-18-2017, 09:01 AM	#2015 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Again, the design is very similar to the existing design. The idea here is not for guys that have the A2A kit already to upgrade to a better kit. It is for those who want a supercharger and do not yet have a kit. So it is a kit available on the market for around $6k (tuner) that makes great power out of the box vs. having to spend upwards of $9 to $10K + to reach power limits that everyone is chasing with a supercharger. chuckie311, tweZ74 and wideglideleon like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-18-2017, 11:50 AM	#2017 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	It will be replaced with the dual side manifold and keep the Y pipe. Stock throttle bodies are utilized. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-20-2017, 08:22 AM	#2022 (permalink)
overtureZ Enthusiast Member Join Date: Dec 2015 Location: Middle TN Age: 30 Posts: 319 Drives: Da Boosted Z Rep Power: 9	Hey Topz, I replied to your PM about my deposit G3RSTY7 likes this. __________________ Auto/Z Enthusiast - Mechanical Engineer - Fabricator - Do it for dale

10-20-2017, 01:27 PM	#2023 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,361 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Found this on Specialtyz's instagram page, can't wait to hear mine. https://www.instagram.com/p/BQUKVbkgu4Q/ brucelidat likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM

10-18-2017, 02:34 PM	#2018 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	Stillen manifold? That thing is such a PITA to install or remove with those %&#% hidden bolts.

10-19-2017, 12:58 PM	#2019 (permalink)
G3RSTY7 Base Member Join Date: Aug 2017 Location: Colorado Posts: 103 Drives: Infiniti G37s 6MT Rep Power: 8	Aaron have you posted about this development to myg37 or should i start a thread letting people know its happening?

10-23-2017, 09:33 AM	#2025 (permalink)
Z Warrior Base Member Join Date: Feb 2014 Location: Virginia Posts: 6 Drives: G37 Rep Power: 11	Will the new kit be compatible with the 08 G37 coupe RWD 5AT?