Topgunz - air to air upgrade

nic370

Your not the only one

Sent from my SM-G920F using Tapatalk

chuckie311

Will this new system work with your A2A kit...I haven’t bought the Stillen supercharger yet that was my plan for next year. If your kit is going to integrate with your A2A kit I’ll just wait and buy it

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

nic370

I can't wait to see where the filter is located and if we keep the crash bar
My bet is we will

Sent from my SM-G920F using Tapatalk

milkcow500

His kit will most likely utilize the stock manifold, so I'm going to speculate no.

Sent from my Pixel XL using Tapatalk

Jayhovah

If this statement holds, you are going to sell a sh!tload of these things. Can't wait to see some pics and numbers.

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted

nic370

Yeah I think it will be stock mani like gtm

Sent from my SM-G920F using Tapatalk

TopgunZ

The design is similar to the old one. Just a lot better as it will come with the upgrades that guys are having to pay a lot more for. Its a supercharger kit that offers the power everyone wants but at a very affordable price.

Options will be available. A front crash bar is one of them.

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

chuckie311

Might have to sell the A2A kit and wait for the new one..

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

milkcow500

Here's some fun news for you guys. I know I haven't ran the V3 T-Trim for long, but I picked up a slightly damaged V7 YSI for cheap and will be installing it as soon as I get parts to rebuild it.

I'll be testing a few things out in regards to pulley combos and capping top end boost/torque. Hopefully my stock block will hold out, but we shall see.

Sent from my Pixel XL using Tapatalk

MoulaZ

Questions sir!

Where will the SC be mounted, same position? If not, then where and and got any photos of the bracket? Can we buy the bracket seperate for those have the original Stillen kit already?

URBiN~HURMiT

'Here's some fun news for you guys. I know I haven't ran the V3 T-Trim for long, but I picked up a slightly damaged V7 YSI for cheap and will be installing it as soon as I get parts to rebuild it.'

I'll be testing a few things out in regards to pulley combos and capping top end boost/torque. Hopefully my stock block will hold out, but we shall see.



hmmmmm... just sayin', might be more than just 'slightly' damaged ...

milkcow500

Only the impeller needs to be replaced, so for the price I got it for, it's slightly damaged

Sent from my Pixel XL using Tapatalk

URBiN~HURMiT

Different physical specs between the V3 and the V7.
Might not be an EZ swap

Vortech V3 specs:
Performance Specs

Internal Step-Up Ratio: 3.61:1
Max Speed: 52,000 RPM
Max Boost: 26 PSI
Max Flow: 1,150 CFM
Max Power: 775 HP
Peak Efficiency: 78%
Performance specs apply to units equipped with standard gearcase.

Dimensions

Discharge OD: 2.75"
Inlet OD: 3.5"
Discharge ID: 2.38"
Inducer Diameter: 3.1"

Vortech V7 specs:
Performance Specs

Internal Step-Up Ratio: 3.45:1
Max Speed: 66,000 RPM
Max Boost: 30+ PSI
Max Flow: 1,600 CFM
Max Power: 1,200+ HP
Peak Efficiency: 78%
Dimensions

Discharge OD: 3.0"
Inlet OD: 4.0"
Discharge ID: 2.64"
Inducer Diameter: 3.7"

__________________
- -Z&I ~~~~

milkcow500

It uses the same mounting bracket as the V3 and has already been test fitted on another vehicle.

Edit: You are looking at the dimensions of the inlets/outlets by the way. I don't think they list the actual dimensions of the blowers, but you can find pics online. The V7 is slightly larger, but has the same mounting bolts.

TopgunZ

Im excited to see the outcome of this project, Milkcow. You should start your own thread though so we can keep all this traffic organized.

Who knows. If this badboy works out good maybe it could be an option for others down the road who want a built motor setup.

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM