Topgunz - air to air upgrade

TBatt

These cables have given several of us fits with intermittent connection problems. Stillen did a redesign late last year to fix the issue. You can't really tell by just looking at them.

Make sure all of the pins look to be at the same height at the very least. If one pin is shorter than the others it will cause problems.

I chased a code 1239 for months and then I replaced the cables and the code went away and the car stopped going into limp mode.

I'm not saying the cables are causing your problem, I'm just pointing out that the cables have been a pretty common problem.

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!