I have a spare pulley from an OEM tensioner I had to replace. It's bigger for sure but without meSuring it may be slightly too big. I've got some playing
|
|
LinkBack | Thread Tools | Display Modes |
06-15-2017, 03:07 PM | #1816 (permalink) |
A True Z Fanatic
Join Date: May 2016
Location: Calgary
Posts: 3,799
Drives: 16 370z
Rep Power: 94683 |
I have a spare pulley from an OEM tensioner I had to replace. It's bigger for sure but without meSuring it may be slightly too big. I've got some playing with things to do later on so will check it out at the same time.
That said, I'm more keen on changing the serpentine side pulley anyhow, provided I can find one that is the normal price. Looks to me like there is still enough room in the OEM tensioner that the belt I got from you with the extra idler should still fit just fine. Last edited by ChaseZ; 06-15-2017 at 03:13 PM. |
06-16-2017, 04:03 AM | #1820 (permalink) |
Track Member
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 16 |
little bit off-topic here but still related to these upgrades,
will be running similar to what topgunz is in regards to engine mods, what clutch is everyone using for around 500-550rwhp? I've been to a couple places here in Aus and they are telling me I need to go a button clutch anything else won't handle it which sounds a bit weird. our 370z's aren't torque monsters, any recommendations? |
06-16-2017, 08:09 AM | #1823 (permalink) | |
Base Member
Join Date: Apr 2015
Location: uk
Posts: 187
Drives: 370
Rep Power: 10 |
Quote:
Some info on pcv post #14 I'm running the 2 can method explained here I'm running 2 mishimoto compact cans in black Sent from my SM-G920F using Tapatalk Last edited by nic370; 06-16-2017 at 08:12 AM. |
|
06-16-2017, 08:52 AM | #1824 (permalink) | |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Quote:
Second this too.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
|
06-16-2017, 09:01 AM | #1825 (permalink) |
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20168 |
My Southbend Stage 3 Daily is arriving TODAY from ZSpeed.
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! |
06-16-2017, 09:10 AM | #1826 (permalink) | |
Base Member
Join Date: Sep 2016
Location: Decatur, Tx
Posts: 23
Drives: 16 Nissan 370z
Rep Power: 9 |
ChaseZ, You are correct. The Stillen 9lb pulley replace the silver 8psi pulley (jackshaft) on the serpentine belt side. See attachment.
Quote:
|
|
06-16-2017, 09:11 AM | #1827 (permalink) |
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20168 |
My search for the larger idler pulley to use on the SC belt when changing the SC pulley to a 9psi setup (2.95 inch) has been very frustrating. I have been using the search tools but keep coming up empty on the part number.
What I did find is the pulley needs to be 76mm in diameter and I think the width is around 32mm. This weekend I will take some measurements of mine and then get the PN from the Gates catalog. Hopefully I can see the PN and remove all doubt......... As an FYI: the SC belt is a Gates K08022 or Magnuson M-79-08-02-020. Vortech 2.95 SC pulley is PN 2A038-295 Idler pulley needed is (maybe) Gates 36225. I need to verify this!
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! |
06-16-2017, 10:20 AM | #1828 (permalink) |
A True Z Fanatic
Join Date: May 2016
Location: Calgary
Posts: 3,799
Drives: 16 370z
Rep Power: 94683 |
For reference the pulley off the OEM serp tensioner is 71mm
However it's probably only wide enough for a 7 rib not 8. Ere is a pretty substantial flange around it which could probably be machined off, but for the cost of a pulley likely isn't worth the effort or expense. |
06-16-2017, 02:29 PM | #1830 (permalink) |
Base Member
Join Date: Sep 2016
Location: Decatur, Tx
Posts: 23
Drives: 16 Nissan 370z
Rep Power: 9 |
Does anyone know where you can get a Stillen 9lb pulley?
conceptzperformance.com just ran out. Stillen 9lb pulley is 2.75" 7 ribs from what i have seen on other forums. Correct me if i am wrong. So I would need to find a similar pulley. Maybe from Vortech. Let me know if anyone finds one please. I will keep looking. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |