Topgunz - air to air upgrade

JWillis72 · 02-18-2017, 08:05 PM

Vortech told me it's the design and the way it oils, they said that only works on units with oil lines.

Sent from my iPhone using Tapatalk

milkcow500 · 02-18-2017, 08:13 PM

Quote:

Originally Posted by JWillis72

Vortech told me it's the design and the way it oils, they said that only works on units with oil lines.

Sent from my iPhone using Tapatalk

I did notice people that had blowers that share oil pretty much had nonexistent issues with overspinning. There's quite a few with the V3 overspinning ~10% with no problems though.

Sent from my Pixel XL using Tapatalk

BOLIO 671 · 02-18-2017, 08:34 PM

He should be ok.....he's also getting all new bearings to support up to 72k rpm.

JWillis72 · 02-18-2017, 09:20 PM

I'm not saying to wasn't the shops fault but the person I spoke to at vortech said that it doesn't work with the V3, I did the bearings also. I hope it works but I wouldn't trust it.

Sent from my iPhone using Tapatalk

TopgunZ · 02-20-2017, 03:41 PM

FYI... I will be leaving for vacation starting tomorrow night and wont be back until March 2nd. I wont be checking PM's/emails. Basically will be putting my phone in the room's safe and leaving it there.

woo · 02-20-2017, 06:32 PM

i have a upgraded impellar (bought kit used so don't know what was done to supercharger) and air2air and 660 injectors on 93 octane. i have the 9psi pulley sitting on the shelf and according to topgunz i need to go ahead and install. Sebastian said to install and start to tune. I JUST DON'T WANT TO START TEARING UP ****!!!!

BOLIO 671 · 02-21-2017, 12:16 PM

What exactly do u need to Install? The end tire kit...the Air 2 Air...or the 9lb pulley? If ur gonna tune u need to Install it all....each upgrade requires a retune..this will save u time, money amd headaches. If it's only the 9lb pulley that's an easy install. You don't have to tear anything apart....espcially if ur on the Air 2 Air upgrade.... as all u need to do is loosen up ur belt enough to swap out the pulleys. Should take u less than 15 mins

woo · 02-21-2017, 08:36 PM

Quote:

Originally Posted by BOLIO 671

What exactly do u need to Install? The end tire kit...the Air 2 Air...or the 9lb pulley? If ur gonna tune u need to Install it all....each upgrade requires a retune..this will save u time, money amd headaches. If it's only the 9lb pulley that's an easy install. You don't have to tear anything apart....espcially if ur on the Air 2 Air upgrade.... as all u need to do is loosen up ur belt enough to swap out the pulleys. Should take u less than 15 mins

Just the 9pd pulley i have the 928 upgrade. Just keep hearing people say dont do upgrade and 9pd pulley. Do one or other. Then i see people doing it.

ChaseZ · 02-21-2017, 09:41 PM

Quote:

Originally Posted by woo

Just the 9pd pulley i have the 928 upgrade. Just keep hearing people say dont do upgrade and 9pd pulley. Do one or other. Then i see people doing it.

Don't take my word for it necessarily, but the people running both are likely on air to air setups already.

Or on borrowed time?

I have both but aren't running the 9# pulley until down the road. Most likely anyways

BOLIO 671 · 03-02-2017, 12:08 PM

So I recall seeing some of the users on this kit making 500+ WHP with upgrades on E85....Does anyone have any numbers of what they're putting down on 91 pump gas? If not..... any estimations of where the numbers should fall?

wideglideleon · 03-02-2017, 01:45 PM

I I will be hitting the dyno on the 11th I'll post my results. I have the air 2 air with upgraded impeller and on 91.
It's a Mustang dyno but will give us an idea what it can do.

ChaseZ · 03-02-2017, 01:51 PM

Quote:

Originally Posted by wideglideleon

I I will be hitting the dyno on the 11th I'll post my results. I have the air 2 air with upgraded impeller and on 91.
It's a Mustang dyno but will give us an idea what it can do if you add 10% to the numbers it spits out..

Fix'd

wideglideleon · 03-02-2017, 02:03 PM

I do realize that the Mustang dyno's real lower than others. That's why they are called heart breaker and why I mentioned that it will be one.

wideglideleon · 03-02-2017, 02:04 PM

I do realize that the Mustang dyno's read lower than others. That's why they are called heart breaker and why I mentioned that it will be one.

TopgunZ · 03-02-2017, 02:48 PM

Are you putting the 9psi serp pulley on? What SC pulley?

02-18-2017, 08:34 PM	#1533 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	He should be ok.....he's also getting all new bearings to support up to 72k rpm. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

02-20-2017, 03:41 PM	#1535 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	FYI... I will be leaving for vacation starting tomorrow night and wont be back until March 2nd. I wont be checking PM's/emails. Basically will be putting my phone in the room's safe and leaving it there. jaytirbhaw, wideglideleon and dboi941 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

02-20-2017, 06:32 PM	#1536 (permalink)
woo Base Member Join Date: Aug 2016 Location: lowcountry,sc Posts: 37 Drives: 16 white sport A7 Rep Power: 9	what to do what to do?????? i have a upgraded impellar (bought kit used so don't know what was done to supercharger) and air2air and 660 injectors on 93 octane. i have the 9psi pulley sitting on the shelf and according to topgunz i need to go ahead and install. Sebastian said to install and start to tune. I JUST DON'T WANT TO START TEARING UP ****!!!! __________________ 2016 pearl white sport tech, air2air and stillen supercharger

02-21-2017, 12:16 PM	#1537 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	What exactly do u need to Install? The end tire kit...the Air 2 Air...or the 9lb pulley? If ur gonna tune u need to Install it all....each upgrade requires a retune..this will save u time, money amd headaches. If it's only the 9lb pulley that's an easy install. You don't have to tear anything apart....espcially if ur on the Air 2 Air upgrade.... as all u need to do is loosen up ur belt enough to swap out the pulleys. Should take u less than 15 mins __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

03-02-2017, 12:08 PM	#1540 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	So I recall seeing some of the users on this kit making 500+ WHP with upgrades on E85....Does anyone have any numbers of what they're putting down on 91 pump gas? If not..... any estimations of where the numbers should fall? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

02-18-2017, 08:05 PM	#1531 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Vortech told me it's the design and the way it oils, they said that only works on units with oil lines. Sent from my iPhone using Tapatalk

02-18-2017, 09:20 PM	#1534 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I'm not saying to wasn't the shops fault but the person I spoke to at vortech said that it doesn't work with the V3, I did the bearings also. I hope it works but I wouldn't trust it. Sent from my iPhone using Tapatalk

03-02-2017, 01:45 PM	#1541 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I I will be hitting the dyno on the 11th I'll post my results. I have the air 2 air with upgraded impeller and on 91. It's a Mustang dyno but will give us an idea what it can do. 370Zsteve and BOLIO 671 like this.

03-02-2017, 02:03 PM	#1543 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I do realize that the Mustang dyno's real lower than others. That's why they are called heart breaker and why I mentioned that it will be one.

03-02-2017, 02:04 PM	#1544 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I do realize that the Mustang dyno's read lower than others. That's why they are called heart breaker and why I mentioned that it will be one.

03-02-2017, 02:48 PM	#1545 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Are you putting the 9psi serp pulley on? What SC pulley? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM