Originally Posted by TopgunZ With test pipes, free flowing exhaust and sci trim then under 8. With cats and stock exhaust then over 8. Test pipes and invidia Gemini
|
|
LinkBack | Thread Tools | Display Modes |
02-02-2017, 07:47 PM | #1457 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Yeah, less restriction, lower psi, more power
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
02-04-2017, 12:20 AM | #1460 (permalink) |
Enthusiast Member
Join Date: Mar 2013
Location: Australia
Posts: 455
Drives: 2012 Nissan 370Z MT
Rep Power: 20144 |
Dyno results from Air to Air upgrade!!!
Well finally after months of waiting for and stuffing around with parts from the US and lots of $$$ my shop has finally completed my A to A upgrade!
Some things to note were that the Stillen fuel pump ran out of pressure when engine was at 5500RPM and was replaced with a 340LPH pump. I've ended up using a 3.00" improved traction SC pulley, stock jack shaft pulley and a 2.80"improved traction serp pulley, giving me 10PSI. I replaced both the SC and serp belts and used the extra idler pulley (with special spacer), that was supplied to me by the most helpful and friendly "TBatt". This is to try and stop any belt slippage on serp side. I am also using the Tial BPV. The Stillen fuel injectors did not need replacing and I'm using BP "Ultimate" 98 RON fuel which is the best you can get here in Australia. The injectors didn't max out and are fine with my current tune. I'm also Uprev tuned and using the stock MAF's, so no SD tuning on this. The dyno is a "Dynapack chassis dyno which are popular in Japan. They are the "static" ones where your (driven) wheels are removed and connected to a unit that spins a hydraulic pump/motor. The wobbles on the dyno graph's lines are due to the Dynapack's sensor which fluctuates a bit in hotter weather (it's middle of summer here down under) and is therefore not at all to do with fluctuations with the engine, so ignore them. The tune is very stable and smooth and the engine idles perfectly. Overall I was hoping to get a bit more power than this, but around 450 (safe) WHP and about 352 wheel torque, it's still great and I'm happy. I'm also glad it's all over and I have my car back finally! You can see the before (Standard Stillen setup) and after (TopGunz A to A upgrade) results on the dyno charts. |
02-04-2017, 12:52 AM | #1461 (permalink) | |
Base Member
Join Date: Jun 2013
Location: Sydney, Australia
Posts: 230
Drives: '09 Z34 BP Turbo V2
Rep Power: 25 |
Definitely going to be hitting you up shortly when my A2A kit finally gets here.
Was so pissed when mine only ended up making 265rwkw @ 10 PSI & full MAF tuning. Seb is eTuning mine with SD & MAF, and I'm very interested to see how that's going to differ to you. Got a graph showing Boost or AFR? Posted some of mine, and never sat well with me how leaned out my original local Tuner made mine. Take a look at the plug photo, Cylinder 1-5 were exaclty like that. Cylinder 6 was absolutely pitch black. Junked them and bought some HKS MH45L ones. Quote:
Last edited by MoulaZ; 02-04-2017 at 12:56 AM. |
|
02-04-2017, 01:29 AM | #1462 (permalink) | |
Enthusiast Member
Join Date: Mar 2013
Location: Australia
Posts: 455
Drives: 2012 Nissan 370Z MT
Rep Power: 20144 |
Quote:
I only have the graph on the left to show boost and no AFR. |
|
02-04-2017, 01:37 AM | #1463 (permalink) |
Base Member
Join Date: Apr 2015
Location: uk
Posts: 187
Drives: 370
Rep Power: 10 |
Mine has made 500 crank
It's been pulled back down to 475 as I was getting a bit of knock at the top This is on the 7lb stillen pully A2a 1000cc Injectors aeromotive 340 and cjm fuel return If I can figure this knock it should fly over 500 but 420whp I'd plenty for now on UK roads trust me Sent from my SM-G920F using Tapatalk |
02-04-2017, 04:35 AM | #1464 (permalink) | |
Base Member
Join Date: Oct 2016
Location: NorCal
Posts: 86
Drives: 2015 370Z Pearl
Rep Power: 9 |
Quote:
|
|
02-04-2017, 01:17 PM | #1466 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Glad it's on the road again Optimizer. I bet it drives better with responsiveness also.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
02-04-2017, 07:36 PM | #1467 (permalink) | |
Enthusiast Member
Join Date: Mar 2013
Location: Australia
Posts: 455
Drives: 2012 Nissan 370Z MT
Rep Power: 20144 |
Quote:
I'm still getting used to it again, especially after it being off the the road for a few months. Yes it's very smooth and responsive and I think I can live with the Tial BPV noise. It's loud but not an "acute" type of noise. I'm getting new tires shortly which is really necessary with this power and a 4.08 diff. I'm going for Yokohama Advan AD08R's. The stock Potenza's aren't sticky enough. |
|
02-04-2017, 08:35 PM | #1468 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Glad to hear it. If you want to quiet down the Tial put a 1.5" hose on it and run it back into the engine bay. Adding a filter the end of that will quiet it down even further.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |