Topgunz - air to air upgrade

StillenZ84 · 12-18-2016, 09:50 PM

Quote:

Originally Posted by Optimiser

My shop just tried a 3.0" idler and the serp belt still can't be adjusted tight enough. Any bigger than 3" will have interference. Is there anything else I can do beside having to go ditch the 2.8" SC pulley and going to a 3.0"?

Might go up to the 2.85". Thats what I did with the 3" idler and it will tighten it up enough to use.

Optimiser · 12-19-2016, 04:53 PM

Quote:

Originally Posted by StillenZ84

Might go up to the 2.85". Thats what I did with the 3" idler and it will tighten it up enough to use.

Ok and thanks for that info although I'm trying to see if I can get a custom length 8PK530 (8) rib belt first before having to swap out SC pulleys again.

dboi941 · 12-20-2016, 04:09 PM

Is the kit ready to be shipped or is there some build time involved?
Also I have a 2016 370 Nismo, There will be no problems with the front bumper right?
Also with I need to get it retuned? Right away?
Thanks for your time OP.

JWillis72 · 12-21-2016, 08:50 AM

Quote:

Originally Posted by dboi941

Is the kit ready to be shipped or is there some build time involved?

Also I have a 2016 370 Nismo, There will be no problems with the front bumper right?

Also with I need to get it retuned? Right away?

Thanks for your time OP.

You will have to tune it before you drive it. The MAFs are moving to after the supercharger, that changes everything.

Sent from my iPhone using Tapatalk

dboi941 · 12-21-2016, 08:59 AM

Quote:

Originally Posted by JWillis72

You will have to tune it before you drive it. The MAFs are moving to after the supercharger, that changes everything.

Sent from my iPhone using Tapatalk

I was hoping to be able to drive it to my tuner after the instill about 10 miles away. Also you have a nice setup I seen alot of your post.

nic370 · 12-21-2016, 05:08 PM

Quote:

Originally Posted by TopgunZ

No that's the problem. The volute isn't clocked right. Clock it per the instructions sent and it will fit like the rest have fit.

Way up at the top of the L pipe where the coupler is, is the fulcrum of that pipe position. If it is turned off the volute 1 inch then that translates to 5 inches at the connection point to the coupler.

Its like taping a straw to a quarter. Rotate the quarter a half inch and watch the other end of the straw move 10 inches.

It really has to be installed correctly in order for it to work.

Where do I find these instructions topz I'm just having these issues as we I write this

TopgunZ · 12-21-2016, 10:39 PM

Quote:

Originally Posted by dboi941

Is the kit ready to be shipped or is there some build time involved?
Also I have a 2016 370 Nismo, There will be no problems with the front bumper right?
Also with I need to get it retuned? Right away?
Thanks for your time OP.

I'll be ready to ship next week. 2016 issue has been resolved. Woo can attest it fits perfect now.

It should run with the old map but driving will be tricky and you would need to "limp" it anywhere.

dboi941 · 12-22-2016, 08:28 AM

Quote:

Originally Posted by TopgunZ

I'll be ready to ship next week. 2016 issue has been resolved. Woo can attest it fits perfect now.

It should run with the old map but driving will be tricky and you would need to "limp" it anywhere.

Thank you for your reply please PM me when your ready to ship, Iam ready to order.

Kzonts · 12-22-2016, 09:08 AM

I wish I had the throw away cash to go FI. It seems like a waste to buy the water cooled Stillen kit and convert it to A2A. It would be nice if one could only order the parts you need from Stillen and then grab this kit.

But I've had my fun a few years back when I ProCharged my V6 Mustang which was a slow pig and didn't net huge gains, but it was an interesting experience. Funny how we drop all this cash into our cars but it has no value for resell. I traded her on the 'Z' last year.

Added the link to my build just for your entertainment :-). Page 5 has a couple runs at the strip. It was my first ever experience on the track.

4.0 V6 ProCharger Project - MustangForums.com

Thanks to all of you for sharing your build experience. Really awesome!

TopgunZ · 12-22-2016, 11:19 AM

True. But when you have the kit already with water there is just SO much hp being left on the table. Dollar per pony starts making it a no brainer.

Not to mention how the responsiveness and driveability skyrocket.

ChaseZ · 12-22-2016, 11:27 AM

Quote:

Originally Posted by Kzonts

It would be nice if one could only order the parts you need from Stillen and then grab this kit.

Been there, tried that lol

Kzonts · 12-22-2016, 02:13 PM

Quote:

Originally Posted by TopgunZ

True. But when you have the kit already with water there is just SO much hp being left on the table. Dollar per pony starts making it a no brainer.

Not to mention how the responsiveness and driveability skyrocket.

Sure. It's great you provided this option for the folks who were stuck with the limitations of the original kit.

Optimiser · 12-22-2016, 07:20 PM

Quote:

Originally Posted by Kzonts

I wish I had the throw away cash to go FI. It seems like a waste to buy the water cooled Stillen kit and convert it to A2A. It would be nice if one could only order the parts you need from Stillen and then grab this kit.

But I've had my fun a few years back when I ProCharged my V6 Mustang which was a slow pig and didn't net huge gains, but it was an interesting experience. Funny how we drop all this cash into our cars but it has no value for resell. I traded her on the 'Z' last year.

Added the link to my build just for your entertainment :-). Page 5 has a couple runs at the strip. It was my first ever experience on the track.

4.0 V6 ProCharger Project - MustangForums.com

Thanks to all of you for sharing your build experience. Really awesome!

I so agree with you about the "resale" value not being there. You just have to resolve yourself to this type of thing being an entertaining and rewarding but expensive hobby.

TBatt · 12-23-2016, 04:27 PM

Isn't EVERY car like that? You buy a new car and it depreciates very fast up to a point in which it slows down (depreciation). I consider modding a car the cost of entertainment. At the end you have two choices (1. Return the car back to stock and get book value at the cost of undoing everything (2. Selling the car as is and take a hit on all of the goodies you put on.

At some point in the future a bone stock 370 will have "extra" value but for now they are just a car so why not mod the heck out of it and enjoy. Life is too short to drive a stock car. Enjoy them, like everything else, we are only here for awhile. Enjoy the heck out of it!!!!!

BTW: My mom passed away last Monday the 19th. It has given me a whole new perspective on life.

JWillis72 · 12-23-2016, 07:19 PM

Quote:

Originally Posted by TBatt

Isn't EVERY car like that? You buy a new car and it depreciates very fast up to a point in which it slows down (depreciation). I consider modding a car the cost of entertainment. At the end you have two choices (1. Return the car back to stock and get book value at the cost of undoing everything (2. Selling the car as is and take a hit on all of the goodies you put on.

At some point in the future a bone stock 370 will have "extra" value but for now they are just a car so why not mod the heck out of it and enjoy. Life is too short to drive a stock car. Enjoy them, like everything else, we are only here for awhile. Enjoy the heck out of it!!!!!

BTW: My mom passed away last Monday the 19th. It has given me a whole new perspective on life.

Sorry to hear about your mom TBatt!

Sent from my iPhone using Tapatalk

12-22-2016, 09:08 AM	#1284 (permalink)
Kzonts Track Member Join Date: Mar 2015 Location: Greenville, SC Age: 61 Posts: 863 Drives: 2019 Roadster Rep Power: 200741	I wish I had the throw away cash to go FI. It seems like a waste to buy the water cooled Stillen kit and convert it to A2A. It would be nice if one could only order the parts you need from Stillen and then grab this kit. But I've had my fun a few years back when I ProCharged my V6 Mustang which was a slow pig and didn't net huge gains, but it was an interesting experience. Funny how we drop all this cash into our cars but it has no value for resell. I traded her on the 'Z' last year. Added the link to my build just for your entertainment :-). Page 5 has a couple runs at the strip. It was my first ever experience on the track. 4.0 V6 ProCharger Project - MustangForums.com Thanks to all of you for sharing your build experience. Really awesome! Last edited by Kzonts; 12-22-2016 at 09:13 AM.

12-22-2016, 11:19 AM	#1285 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	True. But when you have the kit already with water there is just SO much hp being left on the table. Dollar per pony starts making it a no brainer. Not to mention how the responsiveness and driveability skyrocket. BOLIO 671, TBatt and Kzonts like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 12-22-2016 at 11:24 AM.

12-23-2016, 04:27 PM	#1289 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	Isn't EVERY car like that? You buy a new car and it depreciates very fast up to a point in which it slows down (depreciation). I consider modding a car the cost of entertainment. At the end you have two choices (1. Return the car back to stock and get book value at the cost of undoing everything (2. Selling the car as is and take a hit on all of the goodies you put on. At some point in the future a bone stock 370 will have "extra" value but for now they are just a car so why not mod the heck out of it and enjoy. Life is too short to drive a stock car. Enjoy them, like everything else, we are only here for awhile. Enjoy the heck out of it!!!!! BTW: My mom passed away last Monday the 19th. It has given me a whole new perspective on life. TopgunZ, Z&I and Kzonts like this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM

12-20-2016, 04:09 PM	#1278 (permalink)
dboi941 Base Member Join Date: Nov 2015 Location: Bradenton, FL Age: 42 Posts: 24 Drives: 2016 370z Nismo Rep Power: 9	Is the kit ready to be shipped or is there some build time involved? Also I have a 2016 370 Nismo, There will be no problems with the front bumper right? Also with I need to get it retuned? Right away? Thanks for your time OP.