Topgunz - air to air upgrade

TopgunZ · 11-19-2016, 07:37 PM

Nic, I sent all that info to your bud over here.

nic370 · 11-19-2016, 07:40 PM

Quote:

Originally Posted by TopgunZ

Nic, I sent all that info to your bud over here.

Yeah thanks man just spoken to him. After I posted
Thanks again

Sent from my SM-G920F using Tapatalk

TopgunZ · 11-22-2016, 04:46 PM

Well since I gave Frandy almost a month to post his results from the Air to Air kit, I am just going to leave this here...

538whp DJ on stillen fuel system plus meth. Yes, if you go meth you can leave the stillen fuel components in and get past 525whp!

ihiryu · 11-22-2016, 05:10 PM

I have two questions:

How do you remove the aftercooler? The plate in the front, and the whole deal slides out?

And secondly, (this might be a silly question) has anyone attempted to run both the A2W and A2A?

nic370 · 11-22-2016, 05:12 PM

Quote:

Originally Posted by ihiryu

I have two questions:

How do you remove the aftercooler? The plate in the front, and the whole deal slides out?

And secondly, (this might be a silly question) has anyone attempted to run both the A2W and A2A?

Yeah undo the bolts and give it a tug comes right out

Sent from my SM-G920F using Tapatalk

TopgunZ · 11-22-2016, 05:18 PM

The aftercooler in the manifold will be hotter than the air coming into it from the A2A intercooler, so you would be warming up the already cooler air. Not to mention its a restriction. Dont do it.

ihiryu · 11-22-2016, 05:35 PM

Quote:

Originally Posted by TopgunZ

The aftercooler in the manifold will be hotter than the air coming into it from the A2A intercooler, so you would be warming up the already cooler air. Not to mention its a restriction. Dont do it.

Oh I'm not, I was just curious.

bewhitey · 11-24-2016, 11:03 AM

When I removed the cooler in the intake manifold I had to loosen the bolts on the intake manifold and tilt it up to allow the cooler to completely slide out. Otherwise it would only slide out a couple of inches before hitting the engine. THIS WAS NOT FUN! There are three bolts under the intake manifold (on the throttle body side, one at the front is easy to see, the one in the middle and other at the back you can barely see if you are at eye level with the engine. Maybe one of those inspection cameras on a wire would be helpful). Stillen provides a wrench with their kit to get to these bolts, but after a few years and the car changing owners blah blah blah I am sure most people do not have this wrench. I had to cut up and re-weld one. Good luck mane, with some perseverance and a lot of cursing stillen's design team you will get it.

TopgunZ · 11-24-2016, 11:16 AM

Yes, definitely do it before you put your manifold on.

nic370 · 11-24-2016, 11:25 AM

Quote:

Originally Posted by bewhitey

When I removed the cooler in the intake manifold I had to loosen the bolts on the intake manifold and tilt it up to allow the cooler to completely slide out. Otherwise it would only slide out a couple of inches before hitting the engine. THIS WAS NOT FUN! There are three bolts under the intake manifold (on the throttle body side, one at the front is easy to see, the one in the middle and other at the back you can barely see if you are at eye level with the engine. Maybe one of those inspection cameras on a wire would be helpful). Stillen provides a wrench with their kit to get to these bolts, but after a few years and the car changing owners blah blah blah I am sure most people do not have this wrench. I had to cut up and re-weld one. Good luck mane, with some perseverance and a lot of cursing stillen's design team you will get it.

Yeah I discovered this when taking the manifold off

What are people using to get to these bolts

Sent from my SM-G920F using Tapatalk

BOLIO 671 · 11-24-2016, 08:17 PM

I'm glad that I kept my wrench that came with the Stillen Kit. Even with that wrench it's still a PITA. I can only begin to imagine the frustration having to remove the manifold and not having the wrench that comes with the kit.

JWillis72 · 11-24-2016, 08:18 PM

We got a cheap wrench and torched and hammered the bend in it.

Sent from my iPhone using Tapatalk

woo · 11-25-2016, 09:09 PM

Im at a stand still..... directions state to use 45 off supercharger. When you insert L pipe and bend to match up to blowoff valve it collapses the 45..... A 90 coupler would fit perfect....what am i missing????

Venom SS · 11-27-2016, 12:44 AM

TopGunz are you on camaro5?

Sent from my iPhone using Tapatalk

woo · 11-27-2016, 04:56 PM

Well after some minor modifications all is installed and works perfectly. Evidently nissan has changed a few things on the 2016. Lets call it the cuss and throw your tools around the shop changes. Topgunz looked at all the pictures going to make a few minor changes for the new car. Let him know what year your care is.
All in all. I love it. Between the air to air and the supercharger. What a blast to drive! Sorry for all the questions Aaron but you have a solid product!!

11-19-2016, 07:37 PM	#1216 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Nic, I sent all that info to your bud over here. diala4asian likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-22-2016, 04:46 PM	#1218 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Well since I gave Frandy almost a month to post his results from the Air to Air kit, I am just going to leave this here... 538whp DJ on stillen fuel system plus meth. Yes, if you go meth you can leave the stillen fuel components in and get past 525whp! BOLIO 671, JWillis72 and nic370 like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-22-2016, 05:18 PM	#1221 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	The aftercooler in the manifold will be hotter than the air coming into it from the A2A intercooler, so you would be warming up the already cooler air. Not to mention its a restriction. Dont do it. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-24-2016, 11:03 AM	#1223 (permalink)
bewhitey Base Member Join Date: Dec 2015 Location: Denver Posts: 78 Drives: 370z 40th #704 M6 SC Rep Power: 9	When I removed the cooler in the intake manifold I had to loosen the bolts on the intake manifold and tilt it up to allow the cooler to completely slide out. Otherwise it would only slide out a couple of inches before hitting the engine. THIS WAS NOT FUN! There are three bolts under the intake manifold (on the throttle body side, one at the front is easy to see, the one in the middle and other at the back you can barely see if you are at eye level with the engine. Maybe one of those inspection cameras on a wire would be helpful). Stillen provides a wrench with their kit to get to these bolts, but after a few years and the car changing owners blah blah blah I am sure most people do not have this wrench. I had to cut up and re-weld one. Good luck mane, with some perseverance and a lot of cursing stillen's design team you will get it. __________________ Vortech SC\|Stillen Sway Bars+Facia+Skirts+CB Exhaust\|Z1 Clutch+CSC Elimination Kit\|ACT LW Flywheel\|Tein Coils+EDFC\|SPL Camber Arms\|RJM Clutch Pedal\|TWM Short Shifter\|Morimoto Switchback LED's\|Z1 34 Row Oil Cooler\|AIR 2 AIR\|E85 Flex Fuel\|460 whp TheBoostCreep

11-24-2016, 11:16 AM	#1224 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Yes, definitely do it before you put your manifold on. ChaseZ likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

11-22-2016, 05:10 PM	#1219 (permalink)
ihiryu Base Member Join Date: Oct 2016 Location: TX Posts: 141 Drives: 2013 Nismo 370z 6MT Rep Power: 34	I have two questions: How do you remove the aftercooler? The plate in the front, and the whole deal slides out? And secondly, (this might be a silly question) has anyone attempted to run both the A2W and A2A?

11-24-2016, 08:17 PM	#1226 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	I'm glad that I kept my wrench that came with the Stillen Kit. Even with that wrench it's still a PITA. I can only begin to imagine the frustration having to remove the manifold and not having the wrench that comes with the kit. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

11-24-2016, 08:18 PM	#1227 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	We got a cheap wrench and torched and hammered the bend in it. Sent from my iPhone using Tapatalk

11-25-2016, 09:09 PM	#1228 (permalink)
woo Base Member Join Date: Aug 2016 Location: lowcountry,sc Posts: 37 Drives: 16 white sport A7 Rep Power: 9	Im at a stand still..... directions state to use 45 off supercharger. When you insert L pipe and bend to match up to blowoff valve it collapses the 45..... A 90 coupler would fit perfect....what am i missing???? __________________ 2016 pearl white sport tech, air2air and stillen supercharger

11-27-2016, 12:44 AM	#1229 (permalink)
Venom SS Base Member Join Date: Sep 2012 Location: Alpharetta Posts: 48 Drives: 11 Camaro SS Rep Power: 13	TopGunz are you on camaro5? Sent from my iPhone using Tapatalk

11-27-2016, 04:56 PM	#1230 (permalink)
woo Base Member Join Date: Aug 2016 Location: lowcountry,sc Posts: 37 Drives: 16 white sport A7 Rep Power: 9	Topgunz...... what can i say Well after some minor modifications all is installed and works perfectly. Evidently nissan has changed a few things on the 2016. Lets call it the cuss and throw your tools around the shop changes. Topgunz looked at all the pictures going to make a few minor changes for the new car. Let him know what year your care is. All in all. I love it. Between the air to air and the supercharger. What a blast to drive! Sorry for all the questions Aaron but you have a solid product!! wideglideleon and ChaseZ like this. __________________ 2016 pearl white sport tech, air2air and stillen supercharger

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM