Well guys I hit 535/412 on some belt slip only hitting 10.5 psi. Ima have to figure out how to secure the front belt a little more. I have the
|
|
LinkBack | Thread Tools | Display Modes |
10-05-2016, 01:42 PM | #1126 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
Well guys I hit 535/412 on some belt slip only hitting 10.5 psi. Ima have to figure out how to secure the front belt a little more. I have the tension pulley and larger belt in the front but I still think it is a little loose. Anyway happy with the numbers for what it is for sure. Shows what the kit is capable of.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
10-05-2016, 01:54 PM | #1127 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Boom!! The only other supercharged 370z in the world that hit more power than you (by 15hp more) needed 2 superchargers to do it, but...you have more torque than that dual setup.
Congrats! I'd say that's a win for sure.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 10-05-2016 at 01:59 PM. |
10-05-2016, 04:48 PM | #1130 (permalink) | |
A True Z Fanatic
Join Date: Sep 2013
Location: Fort Myers FL
Posts: 2,002
Drives: 2009 370Z yellow 7AT
Rep Power: 45 |
Quote:
You have been waiting for that for a while, congratulations to you too! Sent from my iPhone using Tapatalk |
|
10-05-2016, 05:11 PM | #1131 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,167
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
10-05-2016, 07:35 PM | #1132 (permalink) | |
Track Member
Join Date: Nov 2013
Location: Anaheim
Posts: 753
Drives: 370 Z Nismo
Rep Power: 37 |
Quote:
__________________
Instagram @zmanscm |
|
10-06-2016, 08:32 AM | #1134 (permalink) |
A True Z Fanatic
Join Date: Mar 2010
Location: GUAHAN
Posts: 1,198
Drives: To & From then Back
Rep Power: 3399 |
Awesome numbers StillenZ84.....Are u also running an upgraded impeller or just the 9lb pulley? That E85 Though.....Daaaam....Happy for u and Congrats to Topz...thank u so much for making this kit a reality and available to the rest of us.....
__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 |
10-06-2016, 10:57 AM | #1135 (permalink) | |
A True Z Fanatic
Join Date: Mar 2011
Location: Framingham MA
Posts: 2,732
Drives: 2014 Q50 AWD
Rep Power: 19 |
Quote:
Was wondering if you are running the SC support arm also? The Stillen bracket has been bent a few times.
__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda, |
|
10-08-2016, 02:16 PM | #1136 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
Yes I have the si impeller, 9lb pulley and 2.95" supercharger pulley. E85 def does wonders. Haha appreciate it and def all credit goes to Topz. I did have a guy with a q50 with the Stillen kit still water cooled, claim he made 12 psi with just the 9lb pulley and made 575 on the dyno. All power to him but seems like a ticking time bomb. Huge numbers for water cooled and only a 9lb pulley.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
10-08-2016, 02:18 PM | #1137 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
No I am not. Just have the 3" idler pulley on the supercharger side. Mine so far is holding strong and hasn't bent.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
10-08-2016, 02:32 PM | #1138 (permalink) | |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
Quote:
Sent from my SM-N930V using Tapatalk |
|
10-08-2016, 02:48 PM | #1139 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
Yeah I thought about doing the same thing but seems a tiny bit sketchy for me because I have a vent in my bumper that goes directly to the filter on the supercharger. I talked to him and seems like a cool dude. He was saying he can't do the air to air because certain accessories are in the way for the piping.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
10-08-2016, 03:18 PM | #1140 (permalink) |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
The q50 has an even tighter bay than my g due to all the electronics and the DAS I believe. I just saw someone do a custom rotrex setup on their q50, but the piping looks insane.
Sent from my SM-N930V using Tapatalk |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |