Originally Posted by TBatt That will be my next mod, hopefully this winter. Have you been able to hold the power when WOT switching from 3rd to 4th, or 4th
|
|
LinkBack | Thread Tools | Display Modes |
09-14-2016, 02:04 PM | #1081 (permalink) |
Enthusiast Member
Join Date: Mar 2015
Location: FL
Posts: 445
Drives: N/A
Rep Power: 51 |
Have you been able to hold the power when WOT switching from 3rd to 4th, or 4th to 5th? Or has the clutch slipped some Sent from my iPhone using Tapatalk
__________________
370z |
09-14-2016, 02:16 PM | #1082 (permalink) |
Track Member
Join Date: Dec 2011
Location: Bay Area
Posts: 555
Drives: 10 Nissan 370z
Rep Power: 14 |
I get it on flex fuel cars that are designed for using gas and e85 but have heard issues with seals/gaskets and corrosion from additional water on retrofits. This might just be with older cars using steel and cork materials. Not 100% sure as facts and myth are usually mixed in.
__________________
|
09-14-2016, 04:57 PM | #1084 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
I ran nothing but e85 for 3 years with zero issues. Any newer car has all ethanol resistant material as most gas has e in it anyway.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
09-14-2016, 07:00 PM | #1085 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
Sounds about right. Only thing I have on you is the SI impeller and extra tensioner pulley up front and I am seeing 12.3 psi. Was seeing a constant 11 psi without the extra pulley and gained over a psi just from the extra wrap from the additional pulley up front. Working with Sebz to get the tune right with my additional boost.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
09-14-2016, 08:23 PM | #1086 (permalink) | |
Base Member
Join Date: Apr 2011
Location: Edinburg Tx
Posts: 68
Drives: 370z-Nismo
Rep Power: 14 |
Quote:
Last edited by Jazz8560; 09-14-2016 at 09:17 PM. |
|
09-15-2016, 01:16 AM | #1087 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
That's the bad thing is I still haven't been on the dyno. It's killing me not knowing my numbers and I know it's killing Topgunz. Good dynos here in OK are hard to come by. I'm 100% sure I'm over 500whp. I can hang with 650hp CTSVs, 500 plus Vettes, 335is, I beat stock hellcats, and can beat 600cc bikes. Car is so much fun to drive.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
09-15-2016, 06:33 AM | #1088 (permalink) |
A True Z Fanatic
Join Date: Mar 2010
Location: GUAHAN
Posts: 1,198
Drives: To & From then Back
Rep Power: 3399 |
Thnx for the tips Topz.....Wish we had Ethanol out here....I don't ever see that as an option....it's either 91 @ the pump or Race Gas.....
__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 |
09-15-2016, 08:07 AM | #1089 (permalink) | |
A True Z Fanatic
Join Date: Mar 2010
Location: GUAHAN
Posts: 1,198
Drives: To & From then Back
Rep Power: 3399 |
Quote:
__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 |
|
09-15-2016, 02:22 PM | #1091 (permalink) |
Track Member
Join Date: Dec 2011
Location: Bay Area
Posts: 555
Drives: 10 Nissan 370z
Rep Power: 14 |
https://www.youtube.com/watch?v=WjltYX0OLM0
Saw the other vids too. Surprised you beat the turbo RSX and surprised the 335i kept up for a little bit.
__________________
Last edited by future370zzz; 09-15-2016 at 02:26 PM. |
09-15-2016, 04:20 PM | #1092 (permalink) | |
Base Member
Join Date: Apr 2015
Location: uk
Posts: 187
Drives: 370
Rep Power: 10 |
Quote:
Sent from my SM-G920F using Tapatalk |
|
09-15-2016, 04:20 PM | #1093 (permalink) | |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
Quote:
https://www.youtube.com/channel/UCoe...AgOT4KLF10zRDw
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
|
09-15-2016, 04:47 PM | #1094 (permalink) | |
Base Member
Join Date: Apr 2015
Location: uk
Posts: 187
Drives: 370
Rep Power: 10 |
Quote:
My kit is sat in the house at the moment will get round to it soon Cheers Sent from my SM-G920F using Tapatalk |
|
09-15-2016, 07:57 PM | #1095 (permalink) |
Track Member
Join Date: Dec 2011
Location: Bay Area
Posts: 555
Drives: 10 Nissan 370z
Rep Power: 14 |
What tires are you on? It's not getting swirly at 500whp? I got hankook v12 evos and they get swirly with the small amount of power I have at full takeoff. Can't image at 500whp especially on the dig run with the evo.
__________________
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |