Looks right to me too but I don't have Tops kit so I could be wrong.
|
|
LinkBack | Thread Tools | Display Modes |
08-09-2016, 08:15 PM | #962 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
What really doesn't make sense is you have the kink in there and making 5psi due to it. But you were making 10psi and the tial adaptor pipe can be installed at the same position or length.
Did the heat from the supercharger hitting the kink create a soft spot or cause degregation to the coupler in that area and now it won't hold its shape?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
08-10-2016, 04:26 PM | #963 (permalink) | |
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20168 |
Quote:
If someone has a good picture of how you can use the 45 degree coupler there I would love to see it. The only way I could see it working is if the outlet of the SC is pointing downward, almost straight down.
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! |
|
08-11-2016, 09:45 AM | #964 (permalink) |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
Ok guys I finally found a way to do it after getting hump hose couplers. Here's pretty much what I ended up doing.
1. The two bottom couplers are only attached to the pipes the width of the clamps. 2. The coupler that goes to the sc volute had to be forced up a bit on the side closest to you (the coupler will be in more on one side than the other - mounted slanted pretty much) 3. The bottom side of the 45 degree coupler - I shoved the pipe in ALOT more, which helped bring the piping at equal height to the bottom piping. There's a negligible amount of kinking still, but it looks pretty damn good now. The only issue I'm having right now is that the pipe is touching my fog light now, but I'll deal with that later. Please refer to the pics for reference. Last edited by milkcow500; 08-11-2016 at 09:59 AM. |
08-11-2016, 09:57 AM | #965 (permalink) |
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20168 |
Thanks for posting the pictures.
Are you using the 2.5 diameter pipe that is supplied with the A2A kit? Mine would not reach far enough to go very deep into the 45 degree coupler to keep it from collapsing.
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! |
08-11-2016, 10:03 AM | #966 (permalink) |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
Yes I am. Before, the 45 degree coupler was just in about an inch or so (the width of the clamp + a tiny bit more).
You should be able to push it in a decent amount in order to level the bottom of the piping with the BPV piping. Keep in mind that the piping will be bowed outward a bit, but that is what the hump hose couplers are for. Sent from my SM-N910V using Tapatalk |
08-11-2016, 10:16 AM | #967 (permalink) |
Premium Member
Join Date: Jan 2009
Location: North GA
Posts: 6,831
Drives: Twin Turbo Z34
Rep Power: 3682 |
Who would be interested in ditching the Stillen intake manifold?
I have a design for an air to air upgrade that will simplify the entire stillen kit. You can re-use your stock intake manifold or you can upgrade to the GTR conversion from RJ MFG. PM me if your interested as I am working with them on giving you guys a complete kit to do this and take all the guess work out of this upgrade.
__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054 |
08-11-2016, 10:19 AM | #968 (permalink) |
Premium Member
Join Date: Jan 2009
Location: North GA
Posts: 6,831
Drives: Twin Turbo Z34
Rep Power: 3682 |
to clarify:
This would only require: 1. Rotating the SC'er 2. Vertical flow intercooler 1 in 2 out 3. 2 x bov 4. new piping 5. relocating the MAFs into the charge pipes 6. re-installing intake manifold or GTR conversion
__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054 |
08-11-2016, 10:22 AM | #969 (permalink) |
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20168 |
I think I may try an experiment and see what happens. I'm planning on using two 90 degree mandrel bent 2.75 pipes, one at the SC outlet and one at the BOV coupler to the intercooler and couple them together with a short piece of straight 2.75. I'm not expecting much but I'm concerned about the reduction in pipe diameter to 2.5 inch for that section. At the low boost we are running compared to some of the turbos it probably won't make much difference, but then again you don't know until you try. My thought is to have as smooth of a transition as possible from the SC to the IC.
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! |
08-11-2016, 12:22 PM | #970 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
The intercooler in and out are both 2.5" so that would become the bottleneck at that point.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
08-11-2016, 01:38 PM | #971 (permalink) |
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20168 |
True, but I'm hoping the area increase at the 90 degree turns of the airflow will be less restrictive.
Do you know what Vortech charges for the SI upgrade?
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! Last edited by TBatt; 08-11-2016 at 06:45 PM. |
08-11-2016, 02:10 PM | #972 (permalink) | |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Quote:
The upgrade is $700 and i think shipping is on top of that. But, it will net you 2 psi more over your current trim.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
|
08-11-2016, 04:52 PM | #973 (permalink) |
Track Member
Join Date: Apr 2013
Location: Huntsville, AL
Posts: 832
Drives: 2019 GT-R
Rep Power: 20168 |
Okay, I'll give it another try when I take the front end apart this weekend. I just don't understand how it will work. Guess I'll try jamming it together and see if it will stay open.
After talking to Seb and Vortech, it looks like the only way to reach my power goal is to upgrade to the Si. What I don't understand is why I'm down on power compared to what everyone else is seeing. Shouldn't I be at 420-430 whp at 8.4 psi?
__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE! |
08-11-2016, 11:40 PM | #974 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Like I was saying on the phone, you have 44k on your belt that sounds like never had any conditioning. That serp belt across the 9psi pulley has like 25% wrap, 180 is suggested optimal, and is probably pretty dry. Hit it with that crc I suggested before anything else.
Stock cats? Those will cost you some serious power loss if so. How much timing do you have?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 08-11-2016 at 11:46 PM. |
08-11-2016, 11:53 PM | #975 (permalink) | |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Quote:
GTM stage 1 S/C - Throttle not opening fully? Or boost leak? Please help! Its all a part of Forced Induction. But on the lighter side of things..Can't wait to see it! Seriously though, even if it pulls some guys away from this kit I would like to see your design. I replicated my kit to help out forum members that wanted an A2A system. I think a dual intake design would be even better, pending price since 2 Tials will cost $500 alone. When local buyer Z4life came to pick up his A2A kit I showed him how it is possible to make this kit utilizing the stock intake manifold, so he can attest to that. It is possible, so again, I would love to see your design.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 08-12-2016 at 08:53 AM. |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |