Topgunz - air to air upgrade

JWillis72 · 07-27-2016, 09:10 AM

If Seb is tuning the car he has MAPs he will sell you.

Sent from my iPhone using Tapatalk

jaytirbhaw · 07-27-2016, 11:28 AM

For the guys getting tuned on speed density; works best when its a hybrid tune using the (stock) MAFS when out of boost, then a 4bar map sensor and speed density when in boost. Full speed density ( no MAFs at all) can be kind of jumpy between weather changes

This is all based on a turbo car but I'm sure its the same for you supercharged folks.

TopgunZ · 07-27-2016, 11:51 AM

That is what Seb does with all the cars he tunes with MAP. The "hybrid" version.

future370zzz · 07-27-2016, 02:50 PM

All good info to know.

TopgunZ · 07-27-2016, 03:13 PM

Or you can always upgrade the MAF's. They typically sell a set for $700 new and $500 or under used.

BOLIO 671 · 07-28-2016, 09:51 AM

I'm definitely interested in a kit Tops but won't he ready to pull the trigger til sometime in the next month.

Also just and FYI...Seb is from Specialty Z not Z1 MotorSports

TopgunZ · 07-28-2016, 09:58 AM

Quote:

Originally Posted by BOLIO 671

I'm definitely interested in a kit Tops but won't he ready to pull the trigger til sometime in the next month.

Also just and FYI...Seb is from Specialty Z not Z1 MotorSports

Yup. My bad.

A few others have PM'd me so i am going to go ahead and start getting the Y pipes made.

BOLIO 671 · 07-30-2016, 04:51 AM

Quote:

Originally Posted by TopgunZ

Yup. My bad.

A few others have PM'd me so i am going to go ahead and start getting the Y pipes made.

YOU'RE AWESOME!!!!!

omG37S · 07-30-2016, 11:20 AM

Quote:

Originally Posted by TopgunZ

Yup. My bad.

A few others have PM'd me so i am going to go ahead and start getting the Y pipes made.

I hope to be ready then. I don't want to have to miss the next bach.

Sent from my SM-N920V using Tapatalk

TBatt · 08-01-2016, 11:50 AM

Dyno run scheduled for Aug 6th at Z1. I hope I have the leaked fixed by then. I'll be pulling the front fascia off this afternoon and going back over all of the couplers. Then I will rig up a pressure test and make sure there are no leaks.

I do remember that a couple of the joints were not all that tight of a fit and I had to really crank down on the clamps. I'm wondering about building up the tube with some tape so that the coupler fits better. I'm thinking that the silicone coupler is not squeezing down smooth on the inside and that may be causing the leaks.

I'm open to suggestions!

Chuck33079 · 08-01-2016, 11:52 AM

Quote:

Originally Posted by TBatt

Dyno run scheduled for Aug 6th at Z1. I hope I have the leaked fixed by then. I'll be pulling the front fascia off this afternoon and going back over all of the couplers. Then I will rig up a pressure test and make sure there are no leaks.

I do remember that a couple of the joints were not all that tight of a fit and I had to really crank down on the clamps. I'm wondering about building up the tube with some tape so that the coupler fits better. I'm thinking that the silicone coupler is not squeezing down smooth on the inside and that may be causing the leaks.

I'm open to suggestions!

If you've got couplers that want to pop off, hosing the pipe down with hairspray will help it stay in place.

TopgunZ · 08-01-2016, 12:27 PM

Just start with the pressure test. That will point you in the area of concern and go from there.

TBatt · 08-02-2016, 10:21 AM

I found the problem.......the moron that did the installation (me) left the clamps loose on the coupler that connects the outlet of the intercooler to the Y pipe. How I was getting 7psi is amazing.

Now I can't get any traction to do WOT. Friday the Quaife will be installed so that should help. This car has become a BEAST!

TBatt · 08-02-2016, 11:20 AM

Will the FI tow bar fit around the intercooler on the A2A setup?
370Z Front Tow Bar, Fast Intentions

TopgunZ · 08-02-2016, 11:24 AM

I dont know if it would. I think left to right would be ok, but not sure on depth. Id call and ask them if they would accept a return if it doesn't fit. They are pretty cool, reasonable guys so i am guessing it wouldnt be a problem.

07-27-2016, 09:10 AM	#916 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	If Seb is tuning the car he has MAPs he will sell you. Sent from my iPhone using Tapatalk jaytirbhaw and StillenZ84 like this.

07-27-2016, 11:28 AM	#917 (permalink)
jaytirbhaw Track Member Join Date: Dec 2009 Location: NYC Posts: 814 Drives: 350z HR , Nismo 370z Rep Power: 16	For the guys getting tuned on speed density; works best when its a hybrid tune using the (stock) MAFS when out of boost, then a 4bar map sensor and speed density when in boost. Full speed density ( no MAFs at all) can be kind of jumpy between weather changes This is all based on a turbo car but I'm sure its the same for you supercharged folks. __________________ 2014 Nismo #350 , Built Motor, Top Mount Single Turbo .... 620 whp/ 500 lbs wtq 2012 Track/Drift Z, build coming soon. Build Thread - http://www.the370z.com/members-370z-...70z-build.html

07-27-2016, 11:51 AM	#918 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	That is what Seb does with all the cars he tunes with MAP. The "hybrid" version. StillenZ84 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

07-27-2016, 02:50 PM	#919 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 14	All good info to know. __________________

07-27-2016, 03:13 PM	#920 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Or you can always upgrade the MAF's. They typically sell a set for $700 new and $500 or under used. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 07-27-2016 at 03:15 PM.

07-28-2016, 09:51 AM	#921 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	I'm definitely interested in a kit Tops but won't he ready to pull the trigger til sometime in the next month. Also just and FYI...Seb is from Specialty Z not Z1 MotorSports omG37S likes this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

08-01-2016, 11:50 AM	#925 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	Dyno run scheduled for Aug 6th at Z1. I hope I have the leaked fixed by then. I'll be pulling the front fascia off this afternoon and going back over all of the couplers. Then I will rig up a pressure test and make sure there are no leaks. I do remember that a couple of the joints were not all that tight of a fit and I had to really crank down on the clamps. I'm wondering about building up the tube with some tape so that the coupler fits better. I'm thinking that the silicone coupler is not squeezing down smooth on the inside and that may be causing the leaks. I'm open to suggestions! __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

08-01-2016, 12:27 PM	#927 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Just start with the pressure test. That will point you in the area of concern and go from there. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-02-2016, 10:21 AM	#928 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	I found the problem.......the moron that did the installation (me) left the clamps loose on the coupler that connects the outlet of the intercooler to the Y pipe. How I was getting 7psi is amazing. Now I can't get any traction to do WOT. Friday the Quaife will be installed so that should help. This car has become a BEAST! TopgunZ likes this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

08-02-2016, 11:20 AM	#929 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	Will the FI tow bar fit around the intercooler on the A2A setup? 370Z Front Tow Bar, Fast Intentions __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

08-02-2016, 11:24 AM	#930 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I dont know if it would. I think left to right would be ok, but not sure on depth. Id call and ask them if they would accept a return if it doesn't fit. They are pretty cool, reasonable guys so i am guessing it wouldnt be a problem. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM