Originally Posted by SlyZGuy Is this part of the a2a kit or did you eliminate the piping and install intake on the blower yourself? He used the intake/filter from the
|
|
LinkBack | Thread Tools | Display Modes |
07-19-2016, 09:31 PM | #901 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
He used the intake/filter from the A2A kit.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
07-19-2016, 10:01 PM | #902 (permalink) |
Base Member
Join Date: Jan 2016
Location: Maryland
Posts: 220
Drives: 2014 370z S/C M6
Rep Power: 9 |
Ok cool so it's part of the kit
__________________
Stillen S/C | '15 Nismo Conversion | Aodhan | Eibach | Tokico | SPC | Z1 | Evo-R | Aerojacket | HKS | Berk | CFE | APR | Amuse | Z1 | A2A IC | AAM | Buddy Club | |
07-20-2016, 08:19 PM | #903 (permalink) |
Base Member
Join Date: Dec 2015
Location: Denver
Posts: 78
Drives: 370z 40th #704 M6 SC
Rep Power: 9 |
Yeah that y pipe intake is lame! Has to have a shield so as to not get too turbulent of air on the MAF's. Great place for wasps to make their nests and blocks half of my oil cooler!
when I cleaned out that intake it was wasp genocide, those little dudes got sucked to death and were mashed all up around the filters.
__________________
Vortech SC|Stillen Sway Bars+Facia+Skirts+CB Exhaust|Z1 Clutch+CSC Elimination Kit|ACT LW Flywheel|Tein Coils+EDFC|SPL Camber Arms|RJM Clutch Pedal|TWM Short Shifter|Morimoto Switchback LED's|Z1 34 Row Oil Cooler|AIR 2 AIR|E85 Flex Fuel|460 whp TheBoostCreep |
07-22-2016, 02:31 PM | #904 (permalink) | |
Base Member
Join Date: Feb 2012
Location: Irvine, CA
Posts: 169
Drives: 2009 G37S 6-MT
Rep Power: 13 |
Quote:
Second - Will it also work for my 2010 G37S 6MT Stillen SC? |
|
07-22-2016, 04:16 PM | #905 (permalink) | |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Quote:
The other guy is Milkcow500 here on the forum. He made +50wtq over his water setup but needs to find a DynoJet to get standard numbers. His install was a bit confusing as they put the brackets on incorrect and then modified one to fit instead of flipping it around and to the front. Im sure he will chime in and elaborate on this if you need some more info. Here is a pic of it installed on a G. Also. I have updated the original post with pictures of the kit.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
|
07-22-2016, 10:52 PM | #907 (permalink) |
Base Member
Join Date: Jan 2016
Location: Maryland
Posts: 220
Drives: 2014 370z S/C M6
Rep Power: 9 |
Can't wait to get mine!
TopGunz- the 500whp you mentioned by a member, was that on a stock motor? Did it have 9lb pulley and/or impeller upgrade? Contemplating if it's worth to upgrade the pulley/injectors or to just simply add the a2a. (Cost vs gains) I'm making 449whp now w/9lb pulley.
__________________
Stillen S/C | '15 Nismo Conversion | Aodhan | Eibach | Tokico | SPC | Z1 | Evo-R | Aerojacket | HKS | Berk | CFE | APR | Amuse | Z1 | A2A IC | AAM | Buddy Club | |
07-22-2016, 11:03 PM | #908 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
His name on here is Allenwang. You can try to contact him. No built motor but I think he has an upgraded impeller. Either way, there are so many scary stories popping up of what kind of harm the 9psi pulley is doing to motors with the water kit that I would never run that thing.
A local guy here in the twin cities just had major problems with it and is installing my kit once it's cleaned up. Ever wondered why a huge R & D company like stillen voids the 36k warranty on the motor AND the kit if you opt for the 9psi pulley?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 07-22-2016 at 11:32 PM. |
07-23-2016, 12:38 AM | #909 (permalink) | |
Base Member
Join Date: Jan 2016
Location: Maryland
Posts: 220
Drives: 2014 370z S/C M6
Rep Power: 9 |
Quote:
Yeah I gotcha man, I haven't been driving mine since putting the pulley on and learning all the issues. I'm awaiting ordering your kit when it's available so I can confidently start driving my car again!
__________________
Stillen S/C | '15 Nismo Conversion | Aodhan | Eibach | Tokico | SPC | Z1 | Evo-R | Aerojacket | HKS | Berk | CFE | APR | Amuse | Z1 | A2A IC | AAM | Buddy Club | |
|
07-26-2016, 01:38 PM | #910 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Well the last two kits of the 2nd batch have sold. SlyZguy just picked up the last one.
Who else is interested in one? Should I get a 3rd batch going soon?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
07-26-2016, 07:08 PM | #911 (permalink) |
Track Member
Join Date: Dec 2011
Location: Bay Area
Posts: 555
Drives: 10 Nissan 370z
Rep Power: 14 |
Does this upgrade kit require changing to Ecuteck tuning software and adding MAP sensors?
I'm trying to get a sense of total overall costs with my setup. Already have 1000cc injectors and 340lph fuel pump. On the fence about going E85 and adding RFS. What's the gas mileage per full tank are you guys with E85 getting on average?
__________________
|
07-26-2016, 07:37 PM | #914 (permalink) |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
If you have easy access to E85, then that would be your best bet honestly. I'm assuming you'll just have to gas up more frequently, but the overall price shouldn't be too different.
Sent from my SM-N910V using Tapatalk |
07-27-2016, 08:26 AM | #915 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Well the good news is that if you stay with 91oct then you wont need a rfs. The only reason a rfs is needed is when you need to pump 30% more fuel due to E85's consumption.
Regarding the MAF's and tuning with Uprev... The stock MAF's should work fine with the 8 or 9psi pulley. However, if you upgrade your supercharger to the Si trim and start pushing a lot more air over that then they can be maxed out before redline. MAF's are strange. I had a long conversation with Sebs from Z1 motorsports about this (you know, the guy tuning most of these cars) and he said that they are a bit unpredictable. One car can max out voltage 1000rpm's earlier or later than the next on just about every kit he has seen on the market. Again. I dont see this becoming an issue until you are maxing out the kit. And then heck, might as well get EcuTek if your trying to squeeze every last pony out of the car. We have seen it can pull out a good bit more over Uprev tuning. The MAP sensor is pretty cheap anyway.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |