Originally Posted by omG37S Are you on pump gas Pauly? Milkcow, is a 450 necessary for e85? I'm going to continue letting you be the guinea pig before I do
|
|
LinkBack | Thread Tools | Display Modes |
06-02-2016, 09:58 PM | #601 (permalink) | |
Base Member
Join Date: Apr 2014
Location: Sylvester, Ga.
Posts: 197
Drives: '10 370Z 7AT
Rep Power: 11 |
Quote:
Sent from my SM-N920V using Tapatalk
__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek |
|
06-02-2016, 10:07 PM | #602 (permalink) |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
The 450 is not necessary. I'm going to be doing my initial tune on 93 first and then move onto E85 (I'll be going flex fuel fyi) in maybe a month or so. From what Charles told me, the upgraded S1 + Walbro 450 will be a HUGE upgrade from where I 'would' be at right now. I'm pretty much going overboard, since I'm not even going to be running on the SI unit.
|
06-03-2016, 12:49 PM | #605 (permalink) |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
The 450 will be "better", but isn't necessary. Keep in mind, you need a fuel return kit with an external filter in order to run the 450. I know Topgunz had plans to go with the 450 eventually, but he is running the standard S1 kit right now.
|
06-04-2016, 12:12 PM | #606 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
I hadn't been accepting payment untill I can ship kits the same day. However, with my vacation I took a few payments that will ship when I get back Monday.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
06-04-2016, 06:37 PM | #607 (permalink) |
Base Member
Join Date: Apr 2014
Location: Sylvester, Ga.
Posts: 197
Drives: '10 370Z 7AT
Rep Power: 11 |
Does anyone know where to find idler pulleys by dementions? Autoparts store are useless.
Sent from my SM-N920V using Tapatalk
__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek |
06-04-2016, 09:20 PM | #608 (permalink) |
Base Member
Join Date: Apr 2014
Location: Sylvester, Ga.
Posts: 197
Drives: '10 370Z 7AT
Rep Power: 11 |
I just measured the supercharger pulley on the serpentine side and it is 2.9" . Is this the normal pulley? I thought it was 3.1 or 3.2". Isn't this the pulley that gets changed to the 2.75" one for the 9 psi?
Sent from my SM-N920V using Tapatalk
__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek |
06-04-2016, 09:24 PM | #609 (permalink) |
A True Z Fanatic
Join Date: Sep 2013
Location: Fort Myers FL
Posts: 2,002
Drives: 2009 370Z yellow 7AT
Rep Power: 45 |
It should be 3.2 or 3.1, I tried a 2.75 but that when my supercharger blew up. Don't use that with the 9lb pulley, that pulley alone is probably over spinning it or real close.
Sent from my iPhone using Tapatalk |
06-04-2016, 09:28 PM | #610 (permalink) | |
Base Member
Join Date: Apr 2014
Location: Sylvester, Ga.
Posts: 197
Drives: '10 370Z 7AT
Rep Power: 11 |
Quote:
Sent from my SM-N920V using Tapatalk
__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek |
|
06-04-2016, 09:32 PM | #612 (permalink) |
Base Member
Join Date: Apr 2014
Location: Sylvester, Ga.
Posts: 197
Drives: '10 370Z 7AT
Rep Power: 11 |
Yes I did. I measure them all earlier. The ones on the Jack's haft and supercharger (8 rib ones) are around 3.1". The one on the serpentine side is around 2.9". I'm only seeing 7 psi boost.
Sent from my SM-N920V using Tapatalk
__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek |
06-05-2016, 05:34 AM | #614 (permalink) |
A True Z Fanatic
Join Date: Mar 2010
Location: GUAHAN
Posts: 1,198
Drives: To & From then Back
Rep Power: 3399 |
So do u have a schedule? Do u take orders every 2 weeks, once a month? Trying to figure out timing so once funds are available I can place order.
__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 |
06-06-2016, 08:49 AM | #615 (permalink) |
Base Member
Join Date: May 2015
Location: NYC
Posts: 176
Drives: 11 G37xs
Rep Power: 43 |
Well, looks like another set back. Looks like I'm not having the best of luck. The CJM S1 upgrade kit that was sent to me was missing a line, so my shop has to make one, since it would take too long to have Charles send one out.
I asked Charles a last minute question about possibly hardwiring the Walbro 450 and he told me that we should probably upgrade the wiring, since it runs very hot on stock and probably wouldn't last. Parts should be here on Tuesday, so I'm hoping this will be it finally. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |