Topgunz - air to air upgrade

TBatt · 05-26-2016, 01:48 PM

Quote:

Originally Posted by TopgunZ

PS However, you can get a 3.4" jackshaft pulley and a 3.0" supercharger pulley and it keeps the exact same tension and will spin it at 55,150. If you want to spin it harder a 2.9" would fit and spin it to 57K. Buying two vortech pulleys is the same cost as buying one stillen pulley and it will grab better this way.

That is the info I was needing. Thanks!

Time to go spend more $$. Builds would be a lot more fun if they didn't cost so much.........

EVOHUNTER · 05-26-2016, 03:33 PM

Me, Willis and Topz all did some modding on the charger side.

I had a new tensioner bracket made, 3" idler pulley. 2.75" on blower, stock Jack and stock serp side.

Ill see if I can find it.

TopgunZ · 05-26-2016, 03:41 PM

I had a new tensioner bracket made, 3" idler pulley, 3.0" blower, stock jack and custom 2.90" serp side..lol..

Pauly Z · 05-26-2016, 03:51 PM

With changing the idler pulley size, is there a need for a new tensioner btacket?

Sent from my SM-N920V using Tapatalk

TopgunZ · 05-26-2016, 04:03 PM

Nope. It just takes up more space to run a smaller pulley setup. We upgraded our brackets cuz we were worried about flex

EVOHUNTER · 05-26-2016, 04:26 PM

Correct me if im wrong, I had my bracket extended about an inch aswell because my 3" wasn't taking up the required tension? I could be wrong but I swore mine wouldn't tighten down without the extended slot.

I forgot which thread we did this all in? I couldn't find it

Can you find it topz?

EVOHUNTER · 05-26-2016, 04:26 PM

Found it!!

Stillen Air to Air setup

TopgunZ · 05-26-2016, 04:51 PM

Mine tightens up with the 3.2 and 3.0 setup. Your 2.75 is small enough to need the extra room.

TBatt · 05-26-2016, 05:09 PM

Quote:

Originally Posted by EVOHUNTER

Found it!!

Stillen Air to Air setup

Thanks!

I have read that thread along with every other thread I could find. I'm not going into this totally blind but there is a lot of information on the forum to digest, which is a good thing!

My plan is to document my build so that anyone else that wants to go the A2A route from the beginning can follow what we all have learned. Time to contribute back into the forum.

All of you guys have been great at sharing information and making the mistakes that I don't have to. THANKS!

Special thanks to Jwillis, man you endured some real trials with what you went through. Next time I'm down in FL I'll buy you a beer or two. Oh, just remembered, you are Capt Morgan guy. I can drink to that!

JWillis72 · 05-26-2016, 05:56 PM

Correction- I have a 3" supercharger pulley, I had a 2.8 when the supercharged self destructed.

Sent from my iPhone using Tapatalk

TopgunZ · 05-26-2016, 11:29 PM

bewhitey · 05-26-2016, 11:41 PM

Nice! I want one of these kits! but my z took a dump for the second time this month.... A few weeks ago the dealer said it was the camshaft position sensor and supposedly fixed it. It was doing the same thing today, kept losing power and acting like it wanted to stall out/running sporadically so I rushed over to the dealer before it left me stranded like last time. Water might be getting into something because I just went through the car wash yesterday....maybe they will let me trade it in for a leaf

Sent from my SAMSUNG-SM-G928A using Tapatalk

TopgunZ · 05-27-2016, 07:37 AM

A leaf? Your in Denver, not Boulder.

mikey1600 · 05-27-2016, 08:12 AM

have you got the prices on these as well dude if we bought it included in the full kit price?

Additional supporting mods offered: (at extra charge)
-Rigid pulley tensioner bracket
-Main bracket anti-flex adapter

TopgunZ · 05-27-2016, 08:21 AM

I can get the tensioner brackets for $100. I could get the main anit-flex for around $250. I havent really been concentrating on those much as i am not sure at what point they are needed and do not want to sell something to someone if they don't really need it. Seems like anyone spinning the supercharger to 56K with the 9psi pulley isn't having issues with it and we cant really spin these too much faster without putting them in danger of self destruction.

If we find a need for them I can/will make some.

Now if we ever step into the V1 or V2 units then thats a whole other ballgame.

05-26-2016, 03:33 PM	#557 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Me, Willis and Topz all did some modding on the charger side. I had a new tensioner bracket made, 3" idler pulley. 2.75" on blower, stock Jack and stock serp side. Ill see if I can find it. __________________

05-26-2016, 03:41 PM	#558 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I had a new tensioner bracket made, 3" idler pulley, 3.0" blower, stock jack and custom 2.90" serp side..lol.. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-26-2016, 03:51 PM	#559 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	With changing the idler pulley size, is there a need for a new tensioner btacket? Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

05-26-2016, 04:03 PM	#560 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Nope. It just takes up more space to run a smaller pulley setup. We upgraded our brackets cuz we were worried about flex __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-26-2016, 04:26 PM	#561 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Correct me if im wrong, I had my bracket extended about an inch aswell because my 3" wasn't taking up the required tension? I could be wrong but I swore mine wouldn't tighten down without the extended slot. I forgot which thread we did this all in? I couldn't find it Can you find it topz? __________________

05-26-2016, 04:26 PM	#562 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Found it!! Stillen Air to Air setup __________________

05-26-2016, 04:51 PM	#563 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Mine tightens up with the 3.2 and 3.0 setup. Your 2.75 is small enough to need the extra room. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-26-2016, 05:56 PM	#565 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Correction- I have a 3" supercharger pulley, I had a 2.8 when the supercharged self destructed. Sent from my iPhone using Tapatalk

05-26-2016, 11:29 PM	#566 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	BOLIO 671, mikey1600, Jazz8560 and 5 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-26-2016, 11:41 PM	#567 (permalink)
bewhitey Base Member Join Date: Dec 2015 Location: Denver Posts: 78 Drives: 370z 40th #704 M6 SC Rep Power: 10	Nice! I want one of these kits! but my z took a dump for the second time this month.... A few weeks ago the dealer said it was the camshaft position sensor and supposedly fixed it. It was doing the same thing today, kept losing power and acting like it wanted to stall out/running sporadically so I rushed over to the dealer before it left me stranded like last time. Water might be getting into something because I just went through the car wash yesterday....maybe they will let me trade it in for a leaf Sent from my SAMSUNG-SM-G928A using Tapatalk __________________ Vortech SC\|Stillen Sway Bars+Facia+Skirts+CB Exhaust\|Z1 Clutch+CSC Elimination Kit\|ACT LW Flywheel\|Tein Coils+EDFC\|SPL Camber Arms\|RJM Clutch Pedal\|TWM Short Shifter\|Morimoto Switchback LED's\|Z1 34 Row Oil Cooler\|AIR 2 AIR\|E85 Flex Fuel\|460 whp TheBoostCreep

05-27-2016, 07:37 AM	#568 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	A leaf? Your in Denver, not Boulder. Rusty, TBatt, wideglideleon and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-27-2016, 08:12 AM	#569 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 16	have you got the prices on these as well dude if we bought it included in the full kit price? Additional supporting mods offered: (at extra charge) -Rigid pulley tensioner bracket -Main bracket anti-flex adapter

05-27-2016, 08:21 AM	#570 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I can get the tensioner brackets for $100. I could get the main anit-flex for around $250. I havent really been concentrating on those much as i am not sure at what point they are needed and do not want to sell something to someone if they don't really need it. Seems like anyone spinning the supercharger to 56K with the 9psi pulley isn't having issues with it and we cant really spin these too much faster without putting them in danger of self destruction. If we find a need for them I can/will make some. Now if we ever step into the V1 or V2 units then thats a whole other ballgame. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 05-27-2016 at 08:31 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM