Topgunz - air to air upgrade

EVOHUNTER · 05-25-2016, 09:48 AM

Fuel system held up fine, no issues.

half way through the tune, my HALTECH sensor **** out

Ive ordered one, should be here today, finishing the tune on the 24th. soonest I could get in.

But we know the fuel will hold, I made 10.8 psi, put down 458 WHP and 366 WTQ.

Theres more power to be made, I was in the 10.2-10.8AFR.

EVOHUNTER · 05-25-2016, 09:50 AM

Quote:

Originally Posted by Team_STILLEN

We actually respond to many things in social media and forums. Good, bad, questions, etc. You can check post history to verify.

Our customer service for quite a while has needed improvement and revamping. It is something we have been working.

Ive found your company has really stepped it up, I get a weekly call from your rep, seeing if my company needs anything. I can tell you guys are turning it around, kudos!

TopgunZ · 05-25-2016, 10:21 AM

Quote:

Originally Posted by EVOHUNTER

Fuel system held up fine, no issues.

half way through the tune, my HALTECH sensor **** out

Ive ordered one, should be here today, finishing the tune on the 24th. soonest I could get in.

But we know the fuel will hold, I made 10.8 psi, put down 458 WHP and 366 WTQ.

Theres more power to be made, I was in the 10.2-10.8AFR.

So there you have it guys. Around 11psi you can reach 460whp/370wtq on 91 pump using stillens fuel delivery. Thanks Evo!

So if you went with an upgraded fuel system and ran E85 you can hit 500whp/400wtq on 11psi all day. SAFELY!

Question is...Who doesnt have access to E85 but wants to run a meth setup? This would give similar results to E85. Looking in the Fast Intentions thread they are doing this on the SOHO 370z and making awesome power off pump gas.

DeliriousClam · 05-25-2016, 12:24 PM

Quote:

Originally Posted by Team_STILLEN

We actually respond to many things in social media and forums. Good, bad, questions, etc. You can check post history to verify.

Our customer service for quite a while has needed improvement and revamping. It is something we have been working.

At least to me, you guys are doing a better job with customer service than with some other companies I've been dealing with.

EVOHUNTER · 05-25-2016, 12:54 PM

Just a quick edit, I was running PetroCanada 94 octane, not 91.

milkcow500 · 05-25-2016, 03:01 PM

Stuck a Go Pro in the bay near the gauge and here's some footage:

https://youtu.be/RdR0WY3-J6g

Looks like I'm not getting enough fuel because of ______________

TopgunZ · 05-25-2016, 03:13 PM

Quote:

Originally Posted by milkcow500

Stuck a Go Pro in the bay near the gauge and here's some footage:

https://youtu.be/RdR0WY3-J6g

Looks like I'm not getting enough fuel because of ______________

Ill fill in the blank "too much air"

EVOHUNTER · 05-25-2016, 05:52 PM

Wait? are you on stock pulleys?

Hows it not getting enough fuel??

What am I missing here?

milkcow500 · 05-25-2016, 07:45 PM

9psi pulley. Sebastian is telling me something is wrong with my fuel return and that my pump is fine.

I'm going to have to have my shop take a look at it next weekend or so. I'm probably just going to upgrade to the new CJM S1 kit with a Walbro 450 and call it a day.

JWillis72 · 05-25-2016, 07:58 PM

Quote:

Originally Posted by milkcow500

9psi pulley. Sebastian is telling me something is wrong with my fuel return and that my pump is fine.

I'm going to have to have my shop take a look at it next weekend or so. I'm probably just going to upgrade to the new CJM S1 kit with a Walbro 450 and call it a day.

What pump is in it now ? I have the S1 with the 255 and it doesn't do that.

Sent from my iPhone using Tapatalk

Pauly Z · 05-25-2016, 08:23 PM

Update: Seb said my fuel pressure regulator is set too high which would contribute to running so rich. He also said that my engine loads are too low which leads him to believe there is a boost leak and probably after the MAFs. My question is...If there was a leak in the manifold there would be a vacuum leak wouldn't there? I'm reading 7 psi on the 8 psi pulley.

Sent from my SM-N920V using Tapatalk

JWillis72 · 05-25-2016, 08:32 PM

Yes it would, I had a hose coming off the back of the manifold crack at the T and the car started acting strange. The rpm was all over the place at a stop light.

Sent from my iPhone using Tapatalk

Pauly Z · 05-25-2016, 08:55 PM

That's what I thought. So there is no way that I have a leak after the mafs cause the car idles fine.

Sent from my SM-N920V using Tapatalk

milkcow500 · 05-25-2016, 09:03 PM

Quote:

Originally Posted by JWillis72

What pump is in it now ? I have the S1 with the 255 and it doesn't do that.

Sent from my iPhone using Tapatalk

I have the S1 with the 340 Aero. Runs perfectly fine until I hit 6500+ rpms.

Pauly Z · 05-25-2016, 09:08 PM

Quote:

Originally Posted by milkcow500

I have the S1 with the 340 Aero. Runs perfectly fine until I hit 6500+ rpms.

I have the S1 and 340 Aeromotive. My problem is too much fuel right now. I think your problem is your regulator or pump assembly wasn't modified correctly.

Sent from my SM-N920V using Tapatalk

05-25-2016, 09:48 AM	#526 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Fuel system held up fine, no issues. half way through the tune, my HALTECH sensor **** out Ive ordered one, should be here today, finishing the tune on the 24th. soonest I could get in. But we know the fuel will hold, I made 10.8 psi, put down 458 WHP and 366 WTQ. Theres more power to be made, I was in the 10.2-10.8AFR. BOLIO 671 and wideglideleon like this. __________________

05-25-2016, 12:54 PM	#530 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Just a quick edit, I was running PetroCanada 94 octane, not 91. __________________

05-25-2016, 05:52 PM	#533 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Wait? are you on stock pulleys? Hows it not getting enough fuel?? What am I missing here? __________________ Last edited by EVOHUNTER; 05-25-2016 at 05:59 PM.

05-25-2016, 08:23 PM	#536 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Update: Seb said my fuel pressure regulator is set too high which would contribute to running so rich. He also said that my engine loads are too low which leads him to believe there is a boost leak and probably after the MAFs. My question is...If there was a leak in the manifold there would be a vacuum leak wouldn't there? I'm reading 7 psi on the 8 psi pulley. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

05-25-2016, 08:55 PM	#538 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	That's what I thought. So there is no way that I have a leak after the mafs cause the car idles fine. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

05-25-2016, 03:01 PM	#531 (permalink)
milkcow500 Base Member Join Date: May 2015 Location: NYC Posts: 176 Drives: 11 G37xs Rep Power: 43	Stuck a Go Pro in the bay near the gauge and here's some footage: https://youtu.be/RdR0WY3-J6g Looks like I'm not getting enough fuel because of ______________

05-25-2016, 07:45 PM	#534 (permalink)
milkcow500 Base Member Join Date: May 2015 Location: NYC Posts: 176 Drives: 11 G37xs Rep Power: 43	9psi pulley. Sebastian is telling me something is wrong with my fuel return and that my pump is fine. I'm going to have to have my shop take a look at it next weekend or so. I'm probably just going to upgrade to the new CJM S1 kit with a Walbro 450 and call it a day.

05-25-2016, 08:32 PM	#537 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Yes it would, I had a hose coming off the back of the manifold crack at the T and the car started acting strange. The rpm was all over the place at a stop light. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-10-2015 12:59 AM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 06:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 03:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 08:00 AM