Topgunz - air to air upgrade

omG37S · 05-13-2016, 03:16 PM

Quote:

Originally Posted by milkcow500

Nope. SCI V3, 9psi pulley (2.75"), and K&N filter. Starting with 93 pump fuel and moving onto E85 once they start producing the new S1 fuel return kit.

In your MyG37 thread, it said you still did have problems making this a2a kit fit and custom fabricating was indeed needed.

Also, what's the holdup on the S1 fuel return kit? I'm the other G37 coupe trying to get all of this done right the first time.

Luckily there is an e85 pump near my house, so that's a plus, but, realistically, what am I to gain from e85 over 93 pump?

I will be getting the V3 with 9lb pulley, ID100, and 340lph. Just want to make sure the extra needed for e85 is worth it...

TopgunZ · 05-13-2016, 03:36 PM

I talked to him about this last night. He sent me some pics of how they cut into the y pipe where it fits up to the intercooler and they already had it cut and rewelded to accommodate the fact they had the brackets on wrong prior to putting the brackets on right.

SO.... We still do not know 100% if the kit will fit perfectly up with a G. However, I really think it will.

EVOHUNTER · 05-13-2016, 04:14 PM

there shouldn't be anything different, the install instructions are the same.

the only thing that is different is the front rad support, you might need to cut more away, but otherwise there shouldn't be any issues.

The g37 engine bay does seem a little bit narrower, but we know they use the same intake pipe from stillen kit on the g37/370z

milkcow500 · 05-13-2016, 05:17 PM

Yeah there's no 100% way of what happened unfortunately. Here's how it went down.

1. Installed FMIC brackets upside-down.
2. Shop decided to cut/weld an extension on the bottom of the Y-pipe to get it to fit.
3. Informed the shop that the FMIC brackets are upside-down.
4. Shop flipped ONLY the passenger side bracket - Not sure if they really did anything (Doesn't really matter at this point because the Y-pipe was altered).
5. One pipe now won't align with the throttle body.
6. Welded an extension on that pipe in order to fit.

My shop works on a LOT of 370z's and they told me that the G37 has less room in the front. Not sure if this is true, but we won't really know until the next guy tries. I went to the shop and took a look at the front and I really don't see a crazy difference, then again I'm no expert. I honestly feel like it will fit with either much less fabrication or without any at all.

I intend on going E85 next month. I highly suggest it as it makes a world of difference in terms of power.

BOLIO 671 · 05-13-2016, 08:04 PM

Hey Topz.... Are your kits in yet? I'm just waiting on EVOHUNTERS results as I am on the stock Stillen Pump and Injectors with a 9lb pulley...If the Stillen fuel set up won't work I will have to factor upgrading the fuel system which isn't a big priority for me since on Guam they only sale 91 at the pump. I have no access to E85 and honestly dont think that will ever be an option here. I have a tune for race fuel but I only pour that into the tank when I'm gonna hit the track.....other than that she's always drinking 91.

EVOHUNTER · 05-14-2016, 09:35 AM

Quote:

Originally Posted by BOLIO 671

Hey Topz.... Are your kits in yet? I'm just waiting on EVOHUNTERS results as I am on the stock Stillen Pump and Injectors with a 9lb pulley...If the Stillen fuel set up won't work I will have to factor upgrading the fuel system which isn't a big priority for me since on Guam they only sale 91 at the pump. I have no access to E85 and honestly dont think that will ever be an option here. I have a tune for race fuel but I only pour that into the tank when I'm gonna hit the track.....other than that she's always drinking 91.

If you running the stock pulley setup on your blower youll be fine.

Im a running a 2.75 on blower instead of 3.20", We arnt even sure what kind of boost we will see with it yet.

BOLIO 671 · 05-14-2016, 08:41 PM

I'm on the 9lb Pulley. ...Stillen asked me to run this as I was only hitting 7.0-7.5 psi on their stock pulley....they were thinking that it was due to either my TP'S ( their theory if back pressure with the stock cats) or my climate/location.....With the 9lb pulley I'm hitting a max of 8.3psi @7300rpm. I know that when StillenZ34 started his tuning session he was running lean due to the increase of air from the A2A set up but he has an upgraded fuel system. ...I'm keeping my fingers crossed that the Stillen supplied pump and Injectors that originally came with the kit will be suffice for now...especially considering my limitations of fuel grades here.

Pauly Z · 05-14-2016, 09:25 PM

Yeah I'm only seeing 5 psi with the stock pulley, air to air, and test pipes.

Sent from my SM-N920V using Tapatalk

TopgunZ · 05-15-2016, 07:24 AM

Bolio, what is your elevation?

jaytirbhaw · 05-15-2016, 09:54 AM

Quote:

Originally Posted by milkcow500

Yeah there's no 100% way of what happened unfortunately. Here's how it went down.

1. Installed FMIC brackets upside-down.
2. Shop decided to cut/weld an extension on the bottom of the Y-pipe to get it to fit.
3. Informed the shop that the FMIC brackets are upside-down.
4. Shop flipped ONLY the passenger side bracket - Not sure if they really did anything (Doesn't really matter at this point because the Y-pipe was altered).
5. One pipe now won't align with the throttle body.
6. Welded an extension on that pipe in order to fit.

My shop works on a LOT of 370z's and they told me that the G37 has less room in the front. Not sure if this is true, but we won't really know until the next guy tries. I went to the shop and took a look at the front and I really don't see a crazy difference, then again I'm no expert. I honestly feel like it will fit with either much less fabrication or without any at all.

I intend on going E85 next month. I highly suggest it as it makes a world of difference in terms of power.

Where are you getting e85 from in nyc ?

TopgunZ · 05-15-2016, 12:41 PM

Well here it is. Its the best one my wife could take. The roads we were on weren't the best.

You can see at 10psi the intake temps are 98degrees. About 20* increase from idle.

TopgunZ · 05-15-2016, 12:42 PM

Is the video working?

Pauly Z · 05-15-2016, 12:48 PM

Quote:

Originally Posted by TopgunZ

Is the video working?

Yep it's working

Sent from my SM-N920V using Tapatalk

Rusty · 05-15-2016, 03:19 PM

Quote:

Originally Posted by TopgunZ

Bolio, what is your elevation?

He's on Guam. He should be about 2" above sea level.

Z&I · 05-15-2016, 03:22 PM

Quote:

Originally Posted by jaytirbhaw

Where are you getting e85 from in nyc ?

If you do a Google search you will find that there are a few of them:
Ethanol stations near NYC:
I've been checking some of them out.
The one in Spring Valley is pretty good - all the street racers go there.
The [Power Gas] one in East Orange charges $4.99 a gallon...
There are others. I did this search based on my home location in Northern NJ

[Excluding private stations]
A.
BP
594 Nepperhan Ave
Yonkers, NY 10703
Phone: 914-294-0469
Fuel: Ethanol (E85)
Distance: 7.8 mi

B.
Sunergy
690 Main St
New Rochelle, NY 10801
Phone: 914-632-8617
Fuel: Ethanol (E85)
Distance: 12 mi

C.
Shell
1 N Broadway
Irvington, NY 10533
Phone: 914-591-6766
Fuel: Ethanol (E85)
Distance: 13 mi

D.
Power Gas
205 Sanford St
East Orange, NJ 07018
Phone: 973-678-2002
Fuel: Ethanol (E85)
Distance: 15 mi

E.
Sunoco - ZSA Petroleum
298 N Main St
Spring Valley, NY 10977
Phone: 845-371-6989
Fuel: Ethanol (E85)
Distance: 16 mi

F.
Newark Liberty International Airport
100 Linberg Rd
Newark, NJ 07114
Phone: 973-624-0300 516-710-1898
Fuel: Ethanol (E85)
Distance: 17 mi

G.
Banahan Brothers
310 Theodore Fremd Ave
Rye, NY 10580
Phone: 914-967-9619
Fuel: Ethanol (E85)
Distance: 18 mi

H.
BP
102 Lake Rd
Congers, NY 10920
Phone: 845-268-6454
Fuel: Ethanol (E85)
Distance: 18 mi

I.
Norman's Auto Service
77-40 Hewlett St
New Hyde Park, NY 11040
Phone: 718-347-3400
Fuel: Ethanol (E85)
Distance: 19 mi

J.
JFK Airport Travel Plaza - National Grid - Clean Energy
150th Ave and 147th St
Jamaica, NY 11430
Phone: 718-553-0501 866-809-4869
Fuel: Ethanol (E85)
Distance: 20 mi

05-13-2016, 03:36 PM	#437 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I talked to him about this last night. He sent me some pics of how they cut into the y pipe where it fits up to the intercooler and they already had it cut and rewelded to accommodate the fact they had the brackets on wrong prior to putting the brackets on right. SO.... We still do not know 100% if the kit will fit perfectly up with a G. However, I really think it will. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-13-2016, 04:14 PM	#438 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	there shouldn't be anything different, the install instructions are the same. the only thing that is different is the front rad support, you might need to cut more away, but otherwise there shouldn't be any issues. The g37 engine bay does seem a little bit narrower, but we know they use the same intake pipe from stillen kit on the g37/370z tweZ74 likes this. __________________

05-13-2016, 08:04 PM	#440 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Hey Topz.... Are your kits in yet? I'm just waiting on EVOHUNTERS results as I am on the stock Stillen Pump and Injectors with a 9lb pulley...If the Stillen fuel set up won't work I will have to factor upgrading the fuel system which isn't a big priority for me since on Guam they only sale 91 at the pump. I have no access to E85 and honestly dont think that will ever be an option here. I have a tune for race fuel but I only pour that into the tank when I'm gonna hit the track.....other than that she's always drinking 91. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

05-14-2016, 08:41 PM	#442 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	I'm on the 9lb Pulley. ...Stillen asked me to run this as I was only hitting 7.0-7.5 psi on their stock pulley....they were thinking that it was due to either my TP'S ( their theory if back pressure with the stock cats) or my climate/location.....With the 9lb pulley I'm hitting a max of 8.3psi @7300rpm. I know that when StillenZ34 started his tuning session he was running lean due to the increase of air from the A2A set up but he has an upgraded fuel system. ...I'm keeping my fingers crossed that the Stillen supplied pump and Injectors that originally came with the kit will be suffice for now...especially considering my limitations of fuel grades here. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

05-14-2016, 09:25 PM	#443 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Yeah I'm only seeing 5 psi with the stock pulley, air to air, and test pipes. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

05-13-2016, 05:17 PM	#439 (permalink)
milkcow500 Base Member Join Date: May 2015 Location: NYC Posts: 176 Drives: 11 G37xs Rep Power: 43	Yeah there's no 100% way of what happened unfortunately. Here's how it went down. 1. Installed FMIC brackets upside-down. 2. Shop decided to cut/weld an extension on the bottom of the Y-pipe to get it to fit. 3. Informed the shop that the FMIC brackets are upside-down. 4. Shop flipped ONLY the passenger side bracket - Not sure if they really did anything (Doesn't really matter at this point because the Y-pipe was altered). 5. One pipe now won't align with the throttle body. 6. Welded an extension on that pipe in order to fit. My shop works on a LOT of 370z's and they told me that the G37 has less room in the front. Not sure if this is true, but we won't really know until the next guy tries. I went to the shop and took a look at the front and I really don't see a crazy difference, then again I'm no expert. I honestly feel like it will fit with either much less fabrication or without any at all. I intend on going E85 next month. I highly suggest it as it makes a world of difference in terms of power.

05-15-2016, 07:24 AM	#444 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Bolio, what is your elevation? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-15-2016, 12:41 PM	#446 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Well here it is. Its the best one my wife could take. The roads we were on weren't the best. You can see at 10psi the intake temps are 98degrees. About 20* increase from idle. BOLIO 671, TBatt, EliteXpress and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-15-2016, 12:42 PM	#447 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Is the video working? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM