When I first had it on and I was making 9.5psi it didn't flutter at all. Then after the intake mod and dyno making closer to 13psi, you can hear
|
|
LinkBack | Thread Tools | Display Modes |
04-18-2016, 11:41 AM | #226 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
When I first had it on and I was making 9.5psi it didn't flutter at all. Then after the intake mod and dyno making closer to 13psi, you can hear it at the right moment with the right throttle and rpms. It is no where near what the Turbosmart is.
BTW. When do you get back on the dyno?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
04-18-2016, 09:37 PM | #228 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
I can't remember, What pulley setup do you have on or what will it be when you do?
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
04-18-2016, 10:55 PM | #230 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Dang man. You will be over max impeller speed by 13k. Risky but while it holds together it should make some crazy power.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
04-19-2016, 03:49 AM | #231 (permalink) | |
A True Z Fanatic
Join Date: Mar 2010
Location: GUAHAN
Posts: 1,198
Drives: To & From then Back
Rep Power: 3399 |
Quote:
If your stock everything stillen and have the 9lb pulley your overspinning?
__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 |
|
04-19-2016, 08:44 AM | #232 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Superchargers are driven by belts so by going Air to Air would have zero effect on how fast the supercharger spins. The one and only thing that changes it is pulley ratio.
Yes, with just the 9psi pulley you do slightly overspin the blower. There are guys that have been doing this for years. There are mustangs overspinning by much more than this. The only one I have heard of letting go is Jwicks but he wasn't all that confident in his rebuild when he put the 928 upgraded impeller in. Vortech puts a rating on there to cover their product. If they didn't guys would be spinning them at ridiculous speeds then asking for a free one when it breaks. The way I look at it is that I have never seen a post like "I put the 9psi pulley on, now my supercharger is toast".. or something like that. If there were more instances then I would worry. With just the 9psi pulley it overspins it by about 3K. Now if you were to overspin it by 10K+, then I would advise against it. Guys are overspinning the V2 units by 15K, but those are fed oil differently.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
04-19-2016, 10:27 AM | #234 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Shouldn't have any problems with that config. I swapped my COG setup in last night. This will put me at 56K.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
04-19-2016, 03:29 PM | #235 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 18 |
Topgunz was spot on with figuring out what filter would work best with the air to air setup. Fits almost perfectly and sits in there very snug. From the front you can see that this setup will be getting plenty of cold air. For the filter to fit better and for piece of mind, I used a small 1/8"x 1/2" rubber spacer that I placed on the lip of the supercharger inlet before I slipped on the air filter. This just allowed for a much tighter grip.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34 |
04-19-2016, 03:36 PM | #236 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Lookin' Good Evan! That rubber spacer will be included with all future kits.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
04-19-2016, 04:05 PM | #237 (permalink) |
Base Member
Join Date: Apr 2014
Location: Sylvester, Ga.
Posts: 197
Drives: '10 370Z 7AT
Rep Power: 11 |
Where can I get one of those? Part number? I have been looking all over for something like that.
Sent from my SM-N920V using Tapatalk
__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek |
04-19-2016, 04:07 PM | #238 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Buy a kit and it comes with it.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
04-19-2016, 04:10 PM | #239 (permalink) |
Base Member
Join Date: Apr 2014
Location: Sylvester, Ga.
Posts: 197
Drives: '10 370Z 7AT
Rep Power: 11 |
Lol, really. I don't need a kit. I would have if it was out sooner. I'm getting the car tuned right now. But that's a whole other issue.
Sent from my SM-N920V using Tapatalk
__________________
Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek |
04-19-2016, 04:10 PM | #240 (permalink) |
Track Member
Join Date: Jun 2011
Location: In the Mountains
Posts: 649
Drives: VW UP! 1.0 Ltr
Rep Power: 15 |
Sorry for the "jump-in"!
The Air-suction point is in a warm place! Do not you want to optimize the fresh intake air something? A pipe laying in the front region of the front, or in the left pane in the wheel! Where the fresh air is still cool! Just so my idea?!
__________________
/// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best upgrade/mod for 200-300$? | louiey370z | Engine & Drivetrain | 10 | 06-10-2015 12:59 AM |
Upgrade? | Dzel | Other Vehicles | 83 | 03-08-2014 06:55 PM |
Upgrade | Darryl79 | New Roadster 370Z Owner | 7 | 08-23-2012 03:21 PM |
Big 3 upgrade ??? | dbkustomz | Audio & Video | 6 | 06-30-2012 08:00 AM |